1 000 MPa级经济型高韧性工程机械用钢的研究开发
许云波 1 , 侯自勇 1 , 陈礼清 1 , 胡淑娥 2 , 孙卫华 2 , 王国栋 1
1.东北大学轧制技术及连轧自动化国家重点实验室,辽宁沈阳 110004; 2.济南钢铁集团总公司技术中心,山东济南 250101
Development of 1 000 MPa Steel Plate for Engineering Machine With High Toughness and Economy
摘要 采用超低碳和低Cr、Mo、Ni等的经济型成分设计,研究了控轧、冷却和终冷温度等工艺参数对超高强钢显 微组织和力学性能的影响规律。在实验室条件下,可获得抗拉强度1 000 MPa以上,-40℃冲击值148~236 J超 高强韧性钢板,显微组织以细小的超低碳贝氏体板条为主。富含高密位错和亚结构的上/下贝氏体、较多残余奥氏 体薄膜、细小弥散M/A组织和第二相粒子,这对于超高强钢韧、塑性的提高起到关键的作用。在某宽厚板生产线 首次实现了1 000~1 200 MPa级高韧性工程机械钢板的工业化生产,并成功应用于矿山机械关键构件的制造。
关键词 :
超高强钢 ,
控轧控冷 ,
高韧性 ,
贝氏体
Abstract :The effects of controlled rolling and controlled cooling technology on microstructural and mechanical prop- erties of an ultra-high strength steels with ultra-low carbon and lower Cr, Mo, Ni alloy added were investigated. The high strength steel plate containing of fine low carbon bainite lath can be obtained in laboratory, whose tensile strength reaches above 1 000 MPa and impact absorbing energy 150~250 J at -40℃. It is demonstrated that, up- per/lower bainite composed of high density dislocations and substructure, more retained austenite film, fine and dis- persed M/A and second particles are most important for high toughness and strength. The high toughness 1 000~ 1 200 MPa plates were first industrially produced and used in mineral machine successfully.
Key words :
ultra-high strength steels
thermo-mechanical control process
high toughness
bainite
收稿日期: 2012-06-01
出版日期: 2013-04-19
基金资助: 国家自然科学基金(51174059,U1260204),中央高校基本科研业务费(N110407003,N110607004),国家重点基础研究发展计划 (973计划)(2011CB606306)
通讯作者:
许云波
E-mail: xuyunbo@mail.neu.edu.cn
[1]
刘海波. 堆垛缓冷对Q550D-Z钢板组织性能的影响 [J]. , 2014, 24(3): 31-33.
[2]
王健,房锦超,张玉文. 热轧双相钢DP600关键工艺技术 [J]. , 2014, 24(11): 43-45.
[3]
王韶光, 王晓春, 于大海, 李春雷. FTSR线钛微合金化Q345B/C的工艺与组织性能 [J]. Journal of Materials Sciences & Technology, 2013, 23(7): 28-32.
[4]
刘振宇, 唐 帅, 周晓光, 衣海龙, 王国栋 . 新一代TMCP工艺下热轧钢材显微组织的基本原理 [J]. Journal of Materials Sciences & Technology, 2013, 23(4): 10-16.
[5]
李毅,张旦天,侯强. 34CrMo4/1中厚壁蓄能器用管轧制弯曲原因分析 [J]. Journal of Materials Sciences & Technology, 2012, 22(4): 40-44.
[6]
马正伟,王俊海,亓俊鸿,谷国华. 汽车大梁钢610 L的研究 [J]. Journal of Materials Sciences & Technology, 2011, 21(6): 1-4.
[7]
兰亮云,邱春林,赵德文,高秀华,杜林秀. 冷却工艺对低焊接裂纹敏感性钢组织的影响 [J]. Journal of Materials Sciences & Technology, 2011, 21(2): 29-33.
[8]
狄国标 刘振宇 麻庆申 刘相华 王国栋. 控轧控冷工艺生产海洋平台用钢的研究 [J]. Journal of Materials Sciences & Technology, 2010, 20(1): 4-4.
[9]
赵展鹏,安守勇,侯东华. 高韧性X65管线钢板的开发与生产 [J]. Journal of Materials Sciences & Technology, 2009, 19(8): 11-11.
[10]
丁昊1 ,丁桦1,2 ,张淑娟1 ,唐正友1 ,杨平3. 热轧高锰TRIP/TWIP钢组织性能研究 [J]. Journal of Materials Sciences & Technology, 2009, 19(6): 5-5.
[11]
周民1 ,李德成2 ,杜林秀1 ,刘相华1. 采用控轧控冷工艺试制X100管线钢的研究 [J]. Journal of Materials Sciences & Technology, 2009, 19(6): 1-1.
[12]
郑东升1 ,朱伏先1 ,李艳梅1 ,刘勇2 ,佘光夫2. 控轧控冷工艺对汽车大梁板组织及冷弯性能的影响 [J]. Journal of Materials Sciences & Technology, 2009, 19(5): 17-17.
[13]
冯日清1 ,陈国强2 ,徐宝杰3 ,李秀峰1 ,魏秀梅1. 超细晶螺纹钢生产线改造及工艺实验 [J]. Journal of Materials Sciences & Technology, 2009, 19(5): 41-41.
[14]
商艳1 ,韩庆生1,2 ,郭营利1,3 ,唐正友1 ,丁桦1. TMCP工艺对车轮钢组织及扩孔性能的影响 [J]. Journal of Materials Sciences & Technology, 2008, 18(10): 15-15.
[15]
刘忠,哈权章. 针状铁素体X70管线钢生产实践 [J]. Journal of Materials Sciences & Technology, 2007, 17(5): 10-10.