新一代TMCP工艺下热轧钢材显微组织的基本原理
刘振宇, 唐 帅, 周晓光, 衣海龙, 王国栋
东北大学轧制技术及连轧自动化国家重点实验室,辽宁沈阳110819
Metallurgical Principles of New-Generation TMCP of Hot Rolling Steel
摘要 简述了新一代TMCP与传统TMCP的区别,综述了基于超快冷技术的新一代TMCP工艺的基本物理冶 金学原理,重点介绍了新一代TMCP在细晶强化、析出强化和相变强化中的重要作用。
关键词 :
新一代TMCP ,
超快冷 ,
细晶强化 ,
析出强化 ,
贝氏体 ,
相变强化
Abstract :The comparison was made between conventional TMCP(thermal mechanical controlled processing) and new-generation TMCP in this paper. The metallurgical principles of new-generation TMCP based on ultra fast cool- ing were described. The application of new-generation TMCP on strengthening mechanism such as fine grain strengthening, precipitation strengthening and phase transformation strengthening has been summarized.
Key words :
new-generation TMCP
ultra fast cooling
fine grain strengthening
precipitation strengthening
bain- ite
phase transformation strengthening
收稿日期: 2012-08-30
出版日期: 2013-04-19
基金资助: 中央高校基本科研业务费专项基金(N100507002,N110307002),国家自然科学基金资助项目(51204049)
通讯作者:
唐帅
E-mail: shuai.tang@gmail.com
[1]
刘海波. 堆垛缓冷对Q550D-Z钢板组织性能的影响 [J]. , 2014, 24(3): 31-33.
[2]
王健,房锦超,张玉文. 热轧双相钢DP600关键工艺技术 [J]. , 2014, 24(11): 43-45.
[3]
许云波, 侯自勇, 陈礼清, 胡淑娥, 孙卫华, 王国栋. 1 000 MPa级经济型高韧性工程机械用钢的研究开发 [J]. Journal of Materials Sciences & Technology, 2013, 23(4): 27-30.
[4]
袁 国, 李海军, 王昭东, 王国栋 . 热轧带钢新一代TMCP技术的开发与应用 [J]. Journal of Materials Sciences & Technology, 2013, 23(4): 21-26.
[5]
田 勇, 王丙兴, 袁 国, 王昭东, 王国栋. 基于超快冷技术的新一代中厚板轧后冷却工艺 [J]. Journal of Materials Sciences & Technology, 2013, 23(4): 17-20.
[6]
李毅,张旦天,侯强. 34CrMo4/1中厚壁蓄能器用管轧制弯曲原因分析 [J]. Journal of Materials Sciences & Technology, 2012, 22(4): 40-44.
[7]
王国栋. 新一代TMCP技术的发展 [J]. Journal of Materials Sciences & Technology, 2012, 22(12): 1-5.
[8]
马正伟,王俊海,亓俊鸿,谷国华. 汽车大梁钢610 L的研究 [J]. Journal of Materials Sciences & Technology, 2011, 21(6): 1-4.
[9]
兰亮云,邱春林,赵德文,高秀华,杜林秀. 冷却工艺对低焊接裂纹敏感性钢组织的影响 [J]. Journal of Materials Sciences & Technology, 2011, 21(2): 29-33.
[10]
赵宪明,吴迪,王国栋. 利用新一代TMCP技术生产Ⅲ,Ⅳ级热轧带肋钢筋的理论与实践 [J]. Journal of Materials Sciences & Technology, 2009, 19(7): 1-1.
[11]
周民1 ,李德成2 ,杜林秀1 ,刘相华1. 采用控轧控冷工艺试制X100管线钢的研究 [J]. Journal of Materials Sciences & Technology, 2009, 19(6): 1-1.
[12]
商艳1 ,韩庆生1,2 ,郭营利1,3 ,唐正友1 ,丁桦1. TMCP工艺对车轮钢组织及扩孔性能的影响 [J]. Journal of Materials Sciences & Technology, 2008, 18(10): 15-15.
[13]
刘忠,哈权章. 针状铁素体X70管线钢生产实践 [J]. Journal of Materials Sciences & Technology, 2007, 17(5): 10-10.
[14]
王博,王德永,刘承军,姜茂发. 锰对低碳耐候钢组织与强韧性的影响 [J]. Journal of Materials Sciences & Technology, 2007, 17(11): 41-41.