四流中间包钢液流动行为的数学物理模拟
屈天鹏,姜茂发,王德永
东北大学材料与冶金学院,辽宁 沈阳 110004
Physical and Numerical Simulation on Characteristic of Fluid Flow in FourStrand Tundish
QU Tianpeng,JIANG Maofa,WANG Deyong
School of Materials and Metallurgy, Northeastern University, Shenyang 110004, Liaoning, China
摘要 中间包内流体流动状态对铸坯质量的优劣起着至关重要的作用。采用合理的控流装置可以优化钢液在中间包内的流动特征,本文通过实验室物理模拟实验与数值计算相结合的方法,分析比较了两种导流隔墙对四流连铸中间包内流体流动特征的影响。物理模拟和数学计算结果能够较好地吻合,结果表明:与直板挡墙中间包相比,V型导流隔墙的使用将中间包死区体积分率降低了45%,各出水口之间响应时间和峰值时间之间的标准差有所减小,均匀了各水口之间的流动状态。
关键词 :
中间包 ,
控流装置 ,
数学物理模拟
Abstract :Flow characteristic of fluid in tundish plays an important role on quality of casting production. Optimal flow field can be obtained by using suitable control devices. In this paper, the effect of two types of baffle on flow characteristic in fourstrand tundish was analyzed by physical modeling and numerical simulation. The results of physical modeling and numerical simulation matched well. It came to the conclusion that compared with straight baffle, dead volume fraction in tundish decreased by 45% after using V type baffle and standard deviation of minimum time or peak time has decreased, which indicated the flow characteristic of various outlets has been balanced.
Key words :
tudish
control devices
physical and numerical simulation
收稿日期: 1900-01-01
[1]
刘志远,王重君,刘礼龙. 新型纳米级微孔隔热材料在炼钢生产中的应用 [J]. , 2014, 24(3): 52-57.
[2]
汪先虎,蒋艳菊,李海宝,倪勤胜,丁勇,林丽. 焊接用钢化学成分检验偏差的差异化分析 [J]. , 2014, 25(07): 42-47.
[3]
韩继强, 王彦祥, 许红玉. 中间包温度优化工艺实践 [J]. Journal of Materials Sciences & Technology, 2013, 23(8): 34-37.
[4]
刘志国, 王洪兴. 连铸保护浇注工艺改进 [J]. Journal of Materials Sciences & Technology, 2013, 23(8): 38-41.
[5]
赵岩, 雷洪, 陈海耿, 赫冀成, 孙中强, 邢国成. 两流非对称中间包流场准对称化的数学物理模拟 [J]. Journal of Materials Sciences & Technology, 2011, 21(9): 21-25.
[6]
张志祥, 王德永, 冯耀, 姜茂发. 六流T型连铸中间包流体流动行为的数学模拟 [J]. Journal of Materials Sciences & Technology, 2011, 21(5): 18-22.
[7]
潘学峰 朱苗勇. 中间包连浇过程非稳态流场与温度场的数值模拟研究 [J]. Journal of Materials Sciences & Technology, 2010, 20(6): 8-8.
[8]
郭江,牛海云,李荣. 提高中包寿命,降低耐材消耗 [J]. Journal of Materials Sciences & Technology, 2009, 19(5): 46-46.
[9]
李聿军,许宁辉,李斌,何裕发,向华,邵三萍. 小型转炉降低钢铁料消耗的生产实践 [J]. Journal of Materials Sciences & Technology, 2008, 18(8): 28-28.
[10]
徐少兵,吴建洲. 国内外大方坯连铸机新技术发展综述 [J]. Journal of Materials Sciences & Technology, 2008, 18(4): 1-1.
[11]
屈天鹏,姜茂发,王德永,冯丽萍. 薄板坯连铸中间包吹氩行为的物理模拟 [J]. Journal of Materials Sciences & Technology, 2008, 18(3): 29-29.
[12]
蒋国璋1 ,孔建益1 ,李公法1 ,汪厚植2 ,陶晓林3 ,刘耀林1. 中间包流场的数值模拟及其优化 [J]. Journal of Materials Sciences & Technology, 2008, 18(2): 46-46.
[13]
李永祥1 ,程乃良1 ,陈志平1 ,郑淑国2 ,王颖2 ,朱苗勇2. 三流Τ型中间包内控流装置优化的物理模拟 [J]. Journal of Materials Sciences & Technology, 2008, 18(2): 29-29.
[14]
李京社1 ,韩丽敏1 ,温德松1,2 ,张露2. 圆坯连铸中间包温度场的数值模拟 [J]. Journal of Materials Sciences & Technology, 2008, 18(2): 37-37.
[15]
蒋国璋1 ,孔建益1 ,李公法1 ,汪厚植2 ,陶晓林3 ,刘耀林1. 吹氩技术及其对中间包流场影响的研究 [J]. Journal of Materials Sciences & Technology, 2008, 18(1): 28-28.