应用烟气分析直接出钢模式的冶金效果
吴明,吴发达
马钢股份有限公司第一钢轧总厂,安徽 马鞍山 243000
Analysis on Metallurgical Effect of DirectTapping Using OffGas Analysis System
WU Ming,WU Fada
No.1 SteelMaking Plant of Ma’anshan Iron and Steel Co., Ltd., Ma’anshan 243000, Anhui, China
摘要 马钢120 t转炉应用烟气分析动态控制技术冶炼低碳钢,终点碳和温度命中率达到88.6%,实现不倒炉直接出钢新模式。与倒炉测温取样补吹出钢传统模式相比,其冶炼周期缩短4~6 min,钢水终点φ(O)低(200~300)×10-6,终点w(P)≤0.012%,终点w(S)≤0015%,残w(Mn)高003%~005%,喷溅率小于4%,吨钢石灰消耗小于50 kg。
关键词 :
转炉 ,
烟气分析 ,
出钢模式 ,
冶金效果
Abstract :The offgas dynamic control system was applied on Masteel 120 t BOF to produce low carbon steel,the hit ratio of end temperature and carbon can reach to 88.6%,and the direct tapping was realized. Compared with conventional tapping pattern,the tap to tap time reduce 4~6 min, the activity oxygen at the end point reduce (200~300)×10-6, the end phosphorus was less than 0.012%,the end sulfur was less than 0.015%, the residue w([Mn]) increase 0.03%~0.05%, the sloping ratio was less than 4%, the consumption of lime was less than 50 kg/t.
Key words :
BOF
offgas analysis system
direct tapping
metallurgy effect
收稿日期: 1900-01-01
[1]
游香米,吴令,杨宁川,谢兵,邱鑫. 脱磷转炉内成渣路线的理论研究 [J]. , 2014, 24(5): 9-13.
[2]
卓伟伟,徐玉松. 涟钢90t顶底复吹转炉成渣路线 [J]. , 2014, 24(4): 22-25.
[3]
芦永明,田乃媛,贺东风,王丽娜,陈宏志. 全板带型钢厂高炉—转炉区段配置及其生产组织探讨 [J]. , 2014, 24(4): 45-50.
[4]
刘志远,王重君,刘礼龙. 新型纳米级微孔隔热材料在炼钢生产中的应用 [J]. , 2014, 24(3): 52-57.
[5]
万雪峰,曹东,高学中,于淑娟,朱晓雷,郭庆涛. 冶金尘泥在转炉中的应用技术研究与实践 [J]. , 2014, 24(11): 35-41.
[6]
童健民,胡圣飞. 转炉一次风机喘振的原因及解决对策 [J]. , 2014, 24(10): 46-49.
[7]
郑杰. 提高转炉钢窄成分合格率 [J]. , 2014, 24(1): 26-28.
[8]
吴 伟, 朱永春, 潘树敏, 刘 斌, 冯春松, 佟溥翘. 大型转炉复吹和溅渣工艺技术的研究 [J]. Journal of Materials Sciences & Technology, 2013, 23(8): 1-4.
[9]
龚 伟, 战东平, 姜周华, 宋满堂, 钟晓丹. 转炉流程生产高品质轴承钢的实践 [J]. Journal of Materials Sciences & Technology, 2013, 23(4): 35-39.
[10]
王新华 , 朱国森 , 李海波, 吕延春. 氧气转炉“留渣+双渣”炼钢工艺技术研究 [J]. Journal of Materials Sciences & Technology, 2013, 23(4): 40-46.
[11]
陈伯瑜, 钟良才, 柯建祥, 曾兴富, 赖兆奕, 朱英雄. 顶底侧吹转炉炼钢新技术开发研究 [J]. Journal of Materials Sciences & Technology, 2013, 23(3): 20-25.
[12]
田 蜜, 李海洋. 武钢200 t转炉“负能炼钢”技术的开发及应用 [J]. Journal of Materials Sciences & Technology, 2013, 23(2): 37-39.
[13]
何涛焘, 田 陆, 文华北, 刘卓明, 冯正金, 周存波. 基于炉口火焰信息的转炉炼钢终点预报系统 [J]. Journal of Materials Sciences & Technology, 2013, 23(2): 40-43.
[14]
黄其明, 王 翔, 余 杨, 颜 飞, 徐 杰, 高 瞻. 四点吊挂大型转炉设计理论和工程实践 [J]. Journal of Materials Sciences & Technology, 2013, 23(10): 41-47.
[15]
张军国, 杨晓江, 张大勇, 赵玉刚, 彭素云 . 150 t转炉炼钢工艺参数优化研究与应用 [J]. Journal of Materials Sciences & Technology, 2013, 23(10): 37-40.