Abstract:Abstract: The reasons of laying fracture of C82DA wire rod for the production of bead wire were analysed.It was found when the maximum difference of the roll diameter among the stands of BGV and the difference of the roll diameter between the neighbouring stands in the roll matching in the BGV was guaranteed less than 1mm and 0.5mm, at the same time, by the means of intensifing the training of the workers and operation in the work, adjusting the screw-down space of the rolls properly,changing the groove of each stand regularly and scientifically,mounting the roller guide stably and unbiaseddly, the occurrence of laying fracture could be reduced or even prevented.
收稿日期: 2009-11-04
通讯作者:
李祥才
引用本文:
李祥才. 胎圈钢丝用盘条C82DA生产过程吐断问题原因分析[J]. 中国冶金, 2010, 20(7): 21-21.
Eric lee. Analysis of Reasons of Laying Fracture of C82DA Wire Rod for the Production of Bead Wire. China Metallurgy, 2010, 20(7): 21-21.