通钢FTSC薄板坯连铸机黏结的机制分析和控制实践
关春立 1,2 , 韩立海 2 , 姜 英 2
1.东北大学材料与冶金学院,辽宁沈阳 110819; 2.通化钢铁公司炼轧厂,吉林通化 134003
The Investigation of Sticking Mechanism and Control Practice on FTSC Caster of Tonghua Steel
摘要 黏结问题是通钢FTSC薄板坯连铸生产的主要难题之一,其产生的主要机制是铸坯与结晶器铜板之间的 摩擦力增大引起的坯壳断裂。针对通钢现有生产条件,通过对钢水成分、保护渣性能、工艺参数、钢水过热度等进 行优化调整,使黏结率得到了有效的控制。
关键词 :
薄板坯 ,
黏结 ,
工艺优化
Abstract :The problem of sticking is one of the main challenges of FTSC thin slab continues caster of Tonghua steel, which is caused by the breaking of the slab shell due to the increasing of friction between strand and copper of the mold. On the bases of the processing conditions of Tonghua steel, the composition of molten steel, the performence of fluxes, the parameters of process and the superheat of molten steel were modified. The problem of sticking has been controlled effectively.
Key words :
thin slab caster
sticking
process optimized
收稿日期: 2012-08-09
出版日期: 2012-12-15
通讯作者:
关春立
E-mail: guanchunlii@163.com
[1]
李广艳,商福成,魏承志,何孝文. 莱钢钢坯防氧化的研究与应用 [J]. 中国冶金, 2014, 24(2): 14-18.
[2]
孙争取,刘丽,马洪德,佟圣刚. 加钛深冲钢的工艺优化实践 [J]. Journal of Materials Sciences & Technology, 2012, 22(4): 19-22.
[3]
王国栋, 吕亚伟. 82B硬线钢夹杂物控制研究与轧制工艺优化 [J]. Journal of Materials Sciences & Technology, 2012, 22(3): 15-17.
[4]
郑海兰, 兰正宏. 弱粘煤黏结指数及其储存期限的研究 [J]. Journal of Materials Sciences & Technology, 2012, 22(1): 25-27.
[5]
何庆文. 20CrMnTiH齿轮钢中氧含量控制 [J]. Journal of Materials Sciences & Technology, 2009, 19(9): 28-28.
[6]
李勇1,2 ,占东平1 ,郭喜荣3 ,岳景东4. 预应力PC棒用30MnSi钢冶炼生产实践 [J]. Journal of Materials Sciences & Technology, 2008, 18(6): 32-32.
[7]
屈天鹏,姜茂发,王德永,冯丽萍. 薄板坯连铸中间包吹氩行为的物理模拟 [J]. Journal of Materials Sciences & Technology, 2008, 18(3): 29-29.
[8]
刘树清 . 薄板坯连铸机常见故障分析 [J]. Journal of Materials Sciences & Technology, 2007, 17(8): 59-59.
[9]
杜洪波,杨杰. SPHD薄板坯连铸漏钢原因分析及控制措施 [J]. Journal of Materials Sciences & Technology, 2007, 17(6): 59-59.
[10]
王启1 ,董胜峰2 ,葛新建1. 济钢1700 mm中薄板坯连铸连轧生产实践 [J]. Journal of Materials Sciences & Technology, 2007, 17(6): 13-13.
[11]
张正祥1 ,焦国华1 ,成小军1 ,温德智1 ,孙彦辉2 ,吴光亮1,3. CSP板卷边部缺陷的研究 [J]. Journal of Materials Sciences & Technology, 2007, 17(4): 26-26.
[12]
高仲,张兴中,姚书芳. 薄板坯表面纵裂研究进展 [J]. Journal of Materials Sciences & Technology, 2007, 17(12): 4-4.
[13]
王小燕1 , 肖丽俊2 , 仇圣桃2 , 吴文林1. 硼微合金化对CSP生产低碳铝镇静钢带力学性能的影响 [J]. Journal of Materials Sciences & Technology, 2006, 16(7): 1-1.
[14]
张 文1, 吝章国2, 张 梅1, 李向奎2, 杨林浩2, 孙洪利2, 王习东1 . 邯钢CSP工艺过程钢中夹杂物热力学分析与研究
[J]. Journal of Materials Sciences & Technology, 2006, 16(6): 1-1.
[15]
. Optimization and Practical Production of Fully Continuous Rolling Process In JIGANG [J]. Journal of Materials Sciences & Technology, 2006, 16(6): 1-1.