预应力PC棒用30MnSi钢冶炼生产实践
李勇1,2 ,占东平1 ,郭喜荣3 ,岳景东4
1.东北大学材料与冶金学院,辽宁 沈阳 110004;2.抚顺新钢铁有限责任公司炼钢厂,辽宁 抚顺 113001; 3.沈阳超力钢筋有限公司,辽宁 沈阳 110000;4.中科院金属所科金特种材料有限公司,辽宁 沈阳 110000
Productive Practice of 30MnSi PreStressed Concrete Steel Bar
LI Yong1,2 ,ZHAN Dongping1 ,GUO Xirong3 ,YUE Jingdong4
1.School of Materials and Metallurgy, Northeastern University, Shenyang 110004,Liaoning,China; 2.New Fushun Steel Company, Fushun 113001,Liaoning,China ; 3.Shenyang Chaoli Reinforcing Steel Bar Limited Company, Shenyang 110000, Liaoning,China ; 4.Shenyang Kejin Special Materials Limited Company, Shenyang 110000,Liaoning,China
摘要 采用冶炼轧制拉拔及热处理工艺生产预应力PC棒用30MnSi钢,检测了该钢种试样的性能,优化了生产工艺。通过采用提高原辅材料质量、高拉补吹操作、改质钢包顶渣、调整吹氩参数、长水口氩气密封、中包湍流器、结晶器电磁搅拌等措施,降低了钢中夹杂物质量分数,生产出了合格的预应力PC棒用30MnSi钢铸坯产品。
关键词 :
PC棒 ,
工艺优化 ,
夹杂物 ,
30MnSi
Abstract :By analyzing the mechanical properties of 30MnSi prestressed concrete (PC) steel bar produced by the processes of smeltingrollingdrawingheat treatment, the production process was optimized. The qualified products of 30MnSi PC steel bar was produced in batches after using the following measures to lower the inclusion content in the molten steel: improving the qualities of raw and auxiliary materials, operating with high catch carbon and post blowing practice, modifying the top slag in the ladle, adjusting the parameters of bottom argon blowing, sealed the long nozzle with argon gas, applying of turbulence inhibitor in tundish and mold electromagnetic stirring in the continuous caster.
Key words :
prestressed concrete steel bar
process optimization
inclusion
30MnSi steel
收稿日期: 1900-01-01
[1]
熊伟,彭其春,范丹萍,于学森,邱雷,杨进玲. 低碳铝镇静钢连铸头坯夹杂物 [J]. , 2014, 24(5): 14-17.
[2]
张广杰,张飞. 无钙处理条件下轴承钢钢水可浇性技术的研究与应用 [J]. , 2014, 24(5): 40-44.
[3]
曹磊,王玉民,丁中,刘飞,张辉. 开浇第一炉连铸坯夹杂物形成原因与控制措施 [J]. , 2014, 24(2): 9-13.
[4]
傅向葵,傅一迪. 基于人工智能非金属夹杂物的检测与研究 [J]. , 2014, 24(11): 14-17.
[5]
王华 赵张发 兰鹏 宋丽娜. 18CrMnB齿轮钢棒材中硬质点相成因探究 [J]. , 2014, 24(09): 10-14.
[6]
王鑫潮,王红娜,成国光,寇玉山,左辉,陈列. 20Cr13不锈钢热轧棒材夹杂物研究 [J]. , 2014, 25(07): 17-21.
[7]
续飞飞,程树森. 冷轧过程轧板内圆形夹杂物变形 [J]. , 2014, 25(07): 36-41.
[8]
周伟基, 魏仁杰, 韩志远. 高档汽车齿轮钢冶炼工艺研究 [J]. Journal of Materials Sciences & Technology, 2013, 23(8): 5-8.
[9]
张彩东, 杨晓江, 王 峰, 张大勇. 唐钢RH钢水洁净度分析与研究 [J]. Journal of Materials Sciences & Technology, 2013, 23(8): 9-13.
[10]
李丰功, 战东平, 张佩灿, 姜周华, 王博, 张思勋, 韩文习. 脱氧合金化工艺对高铝钢中夹杂物的影响 [J]. Journal of Materials Sciences & Technology, 2013, 23(7): 21-23.
[11]
赵圣功. 叉车用门架槽钢Q420C质量控制与改进 [J]. Journal of Materials Sciences & Technology, 2013, 23(11): 27-31.
[12]
彭其春 , 于学森 , 熊 伟 , 盛喜松 , 罗传清 , 刘 俊. 不同浇铸阶段低碳钢连铸板坯洁净度研究 [J]. Journal of Materials Sciences & Technology, 2012, 22(8): 17-21.
[13]
李静敏, 王敏, 王平安, 李怡宏, 张立强, 包燕平. 车桥管用20Mn2钢的二次氧化行为 [J]. Journal of Materials Sciences & Technology, 2012, 22(5): 34-37.
[14]
魏薇, 费燕, 李俊, 勾新勇. 高寒地区用H型钢低温冲击性能分析与改进 [J]. Journal of Materials Sciences & Technology, 2012, 22(5): 18-20.
[15]
孙争取,刘丽,马洪德,佟圣刚. 加钛深冲钢的工艺优化实践 [J]. Journal of Materials Sciences & Technology, 2012, 22(4): 19-22.