板坯连铸漏钢的探讨
朱开军,任建义,曾扩军
邯郸钢铁集团公司第三炼钢厂,河北 邯郸 056015
Practice Discussion on Breakout of Slab Continuous Casting
ZHU Kaijun,REN Jianyi,ZENG Kuojun
No.3 Steel Making Plant, Handan Iron and Steel Co Ltd, Handan 056015, Hebei, China
摘要 针对邯钢大板坯近2年来的漏钢事故,结合日常所积累的数据,分析了多种漏钢事故的类别和成因;并通过生产实践总结出影响漏钢的因素及其控制措施,其在预防漏钢上起到了较好的作用。
关键词 :
板坯连铸 ,
温度 ,
成分 ,
粘结漏钢
Abstract :Aimed at the breakout of the slab in recent two years and based on the accumulated datum, the reason for different types of the breakout was analyzed. Controlling measures used in production practice is effective on avoiding breakout of casting.
Key words :
slab continuous casting
temperature
component
break out
收稿日期: 1900-01-01
[1]
张殿伟 ,赵志星,赵宝军. 首钢高炉渣与配制四组元渣的黏度研究 [J]. , 2014, 24(4): 11-15.
[2]
余国松. 1215MS易切削钢盘条翘皮成因 [J]. , 2014, 24(4): 26-30.
[3]
王影,柴超. 通钢FTSR工艺降低HP345屈强比的试验 [J]. , 2014, 24(4): 36-38.
[4]
陈子刚,马有辉. 中厚板温度场的分步解析求解方法及应用 [J]. , 2014, 24(1): 14-17.
[5]
郑杰. 提高转炉钢窄成分合格率 [J]. , 2014, 24(1): 26-28.
[6]
金百刚,王军,李立勋,李超,贾东升,苏宽. 电磁制动技术在板坯连铸过程中的应用 [J]. , 2014, 24(1): 29-33.
[7]
高建军 严定鎏 齐渊洪 张俊 郭玉华. 氧气高炉风口前燃烧带数值模拟 [J]. , 2014, 24(09): 44-48.
[8]
汪先虎,蒋艳菊,李海宝,倪勤胜,丁勇,林丽. 焊接用钢化学成分检验偏差的差异化分析 [J]. , 2014, 25(07): 42-47.
[9]
钟新建, 李建华, 张南风. 双交叉限幅混合燃烧控制系统在CSP中的应用 [J]. Journal of Materials Sciences & Technology, 2013, 23(9): 37-40.
[10]
陈秀娟, 吴启常, 张建梁, 王永涛. 高风温热风炉热点问题讨论 [J]. Journal of Materials Sciences & Technology, 2013, 23(9): 7-12.
[11]
陈艳波, 郭艳永, 霍吉祥, 付友昌, 田伟杰, 朱志宏. 高炉炉缸长寿认识及维护治理实践 [J]. Journal of Materials Sciences & Technology, 2013, 23(8): 30-33.
[12]
韩继强, 王彦祥, 许红玉. 中间包温度优化工艺实践 [J]. Journal of Materials Sciences & Technology, 2013, 23(8): 34-37.
[13]
李夯为, 唐顺兵. 大型高炉操作炉型合理性的特点及调整 [J]. Journal of Materials Sciences & Technology, 2013, 23(8): 26-29.
[14]
王韶光, 王晓春, 于大海, 李春雷. FTSR线钛微合金化Q345B/C的工艺与组织性能 [J]. Journal of Materials Sciences & Technology, 2013, 23(7): 28-32.
[15]
杨作宏, 程子建. 超纯铁素体不锈钢新品种研发与应用 [J]. Journal of Materials Sciences & Technology, 2013, 23(5): 17-21.