250 t 转炉LT泄爆控制的生产实践
王玉生, 唐文明, 何顺生, 田晓涛, 于博
河北钢铁集团邯钢集团西区炼钢厂,河北 邯郸 056015
Production Practice Of LT Process Explosive Venting Control On 250t Converter
WANG Yu-sheng, TANG Wen-ming, HE Shun-sheng, TIAN Xiao-tao, YU Bo
The West Steel-Making Plant, Hebei Iron and Steel Group Handan Iron and Steel Group Co., Ltd., Handan 056015, Hebei, China
摘要 邯钢集团西区炼钢厂3×250 t转炉采用干法(LT法)烟气净化回收工艺。由于转炉非标准化操作和设备故障等原因,在吹炼过程中经常发生静电除尘器的泄爆事故,LT系统只有故障处理结束后才可正常工作,所以严重地影响了生产的顺行。通过对操作和设备的跟踪,分析了泄爆产生的原因,并通过采取有效措施来优化转炉操作,使西区炼钢厂3座静电除尘器的泄爆次数保持在平均2次/月,保证了生产和设备运行的稳定。
关键词 :
干法除尘工艺 ,
静电除尘器 ,
泄爆 ,
措施
Abstract :The dry dedusting process (LT process) for the flue gas cleaning and recovery applicated on 3×250t converters in the West Steel-making Plant of Handan Iron & Steel Group Co..The explosive ventings of electrostatic precipitator system caused during converter smelting.This paper analyzed the causes of explosive-venting and to optimize the converter process operation by effective measures. The times of explosive ventings average 2 times per month and ensured the whole line safe and stable production.
Key words :
dry dedusting process
electrostatic precipitator
explosive venting
measures
收稿日期: 2011-11-25
出版日期: 2013-03-15
通讯作者:
王玉生
E-mail: wangyushenggao@sohu.com
引用本文:
王玉生, 唐文明, 何顺生, 田晓涛, 于博. 250 t 转炉LT泄爆控制的生产实践[J]. 中国冶金, 2013, 23(3): 33-35.
WANG Yu-sheng, TANG Wen-ming, HE Shun-sheng, TIAN Xiao-tao, YU Bo. Production Practice Of LT Process Explosive Venting Control On 250t Converter. China Metallurgy, 2013, 23(3): 33-35.
链接本文:
http://www.zgyj.ac.cn/CN/ 或 http://www.zgyj.ac.cn/CN/Y2013/V23/I3/33
[1]
薛锴,刘新军,张宇晓,司晋利,董江峰,霍瑞霞. 高炉鼓风机高效安全运行措施的实践 [J]. , 2014, 24(09): 53-56.
[2]
张健,汪灵俐,张宇,刘银梅,韩自博. 浅析热闷钢渣加工生产线粉尘的控制措施 [J]. , 2014, 25(07): 64-66.
[3]
姜杉杉, 王代军. 四川德胜260 m2 烧结工程设计及提高烧结矿强度生产实践 [J]. Journal of Materials Sciences & Technology, 2013, 23(2): 29-33.
[4]
田 蜜, 李海洋. 武钢200 t转炉“负能炼钢”技术的开发及应用 [J]. Journal of Materials Sciences & Technology, 2013, 23(2): 37-39.
[5]
刘振林, 刘崇亭, 贾 勇, 刘继彬. 济钢近几年炼铁系统技术创新与实践 [J]. Journal of Materials Sciences & Technology, 2012, 22(6): 8-11.
[6]
王 谦, 鲁永剑 , 何宇明, 胡 兵, 熊银成, 张建国. 提高宽厚板坯无清理率的关键技术 [J]. Journal of Materials Sciences & Technology, 2012, 22(12): 22-27.
[7]
王立君, 李法兴, 张君平, 时振明. 提高电炉流程生产含硼钢冶金质量的措施 [J]. Journal of Materials Sciences & Technology, 2011, 21(3): 24-27.
[8]
王柱, 刘宁, 李文, 李银军, 田勇. 济钢1700热连轧粗轧机打滑现象研究 [J]. Journal of Materials Sciences & Technology, 2011, 21(1): 38-42.
[9]
刘文仲. 中国钢铁工业过程控制数学模型的应用现状及对策 [J]. Journal of Materials Sciences & Technology, 2010, 20(12): 1-3.
[10]
彭其春, 赵金涛, 田俊, 陈永金, 张学辉, 彭胜堂. 武钢冷轧板表面“黑线”缺陷分析 [J]. Journal of Materials Sciences & Technology, 2010, 20(1): 21-25.
[11]
李聿军,许宁辉,李斌,何裕发,向华,邵三萍. 小型转炉降低钢铁料消耗的生产实践 [J]. Journal of Materials Sciences & Technology, 2008, 18(8): 28-28.
[12]
崔风平1 ,赵乾2 ,唐愈3. 铸坯内部缺陷对钢板分层形成的影响 [J]. Journal of Materials Sciences & Technology, 2008, 18(2): 14-14.
[13]
魏励,杨海滨. 连铸含铌钢板坯表面横裂纹原因分析和措施 [J]. Journal of Materials Sciences & Technology, 2008, 18(12): 17-17.
[14]
刘树清 . 薄板坯连铸机常见故障分析 [J]. Journal of Materials Sciences & Technology, 2007, 17(8): 59-59.
[15]
章晓辉,马觉. 氧化铁粉质量的影响因素分析及解决措施 [J]. Journal of Materials Sciences & Technology, 2007, 17(8): 17-17.