氧化铁粉质量的影响因素分析及解决措施
章晓辉,马觉
涟源钢铁集团有限公司技术中心,湖南 娄底 417009
Analysis of Influence on Lysteel Ferric Oxide PowderQuality and Countermeasures
ZHANG Xiaohui,MA Jue
Technology Center, Lianyuan Iron and Steel Co Ltd, Loudi 417009, Hunan, China
摘要 涟钢冷轧厂分析了影响副产品氧化铁粉的各种因素;并从反应的温度与时间、煤气热值与压力、喷洒的压力与流量以及废酸等方面,提出了解决问题的具体措施。目前氧化铁粉1等品率达到76.79%。
关键词 :
氧化铁粉 ,
煤气 ,
焙烧炉 ,
质量 ,
措施
Abstract :Factors on the quality of the ferric oxide powder, which were the byproduct in Lysteel coldmill, were analyzed. Some measurements were taken in aspect of reaction temperature, reaction time, heatvalue and pressure of coal gas, pressure and flow of insufflation, wastes acid. The firstrate product of ferric oxide powder reaches to 7679%.
Key words :
ferric oxide powder
coal gas
roasting furnace
quality
measures
收稿日期: 1900-01-01
[1]
秦晓勇 ,刘雄 ,陈林根 ,孙丰瑞 . 高炉利用系数目标优化模型的研究与应用 [J]. , 2014, 24(4): 5-10.
[2]
鲍磊,韩自力,张银花,高怡斐,董瀚,周清跃. 高速铁路钢轨质量评估 [J]. , 2014, 24(11): 9-13.
[3]
张桂平,张大鹏. 加热炉烟气反吹系统对蓄热体的影响 [J]. , 2014, 24(10): 7-10.
[4]
芮文杰,唐章富,刘向新. 邯钢2×60MW常规机组升级CCPP方案 [J]. , 2014, 24(10): 32-34.
[5]
耿赛晓. 低碳冷轧用钢SPHC不同冶炼工艺的对比 [J]. , 2014, 24(10): 42-45.
[6]
邱国兴,殷忠力,朱化朋,姜智文. 提高煤气利用率降低高炉燃料比 [J]. , 2014, 24(1): 47-51.
[7]
薛锴,刘新军,张宇晓,司晋利,董江峰,霍瑞霞. 高炉鼓风机高效安全运行措施的实践 [J]. , 2014, 24(09): 53-56.
[8]
BURGMANN Wilhelm,GUSTAFSON Thore,DAVEN Jen. 钢水脱气用真空泵系统的选择 [J]. , 2014, 24(08): 55-61.
[9]
张健,汪灵俐,张宇,刘银梅,韩自博. 浅析热闷钢渣加工生产线粉尘的控制措施 [J]. , 2014, 25(07): 64-66.
[10]
冯光宏, 张宏亮, 张培. 国内外特殊钢轧制与产品质量控制的技术进展 [J]. Journal of Materials Sciences & Technology, 2013, 23(9): 1-6.
[11]
周伟基, 魏仁杰, 韩志远. 高档汽车齿轮钢冶炼工艺研究 [J]. Journal of Materials Sciences & Technology, 2013, 23(8): 5-8.
[12]
吴启常, 王筱留. 炉缸长寿的关键在于耐火材料质量的突破 [J]. Journal of Materials Sciences & Technology, 2013, 23(7): 11-16.
[13]
李丰功, 战东平, 张佩灿, 姜周华, 王博, 张思勋, 韩文习. 脱氧合金化工艺对高铝钢中夹杂物的影响 [J]. Journal of Materials Sciences & Technology, 2013, 23(7): 21-23.
[14]
孙恺, 李福民, 陈 伟, 伊凤永, 吕庆. 巴西矿和澳矿的烧结性能试验 [J]. Journal of Materials Sciences & Technology, 2013, 23(5): 22-25.
[15]
李会朝, 王 云, 刘文萍, 郝玮玮. 邯钢2250热轧加热炉降低单位煤气消耗的攻关成果 [J]. Journal of Materials Sciences & Technology, 2013, 23(4): 51-55.