板坯连铸恒拉速浇铸提高铸坯质量
王洪兴
河北钢铁集团邯钢公司邯宝炼钢厂, 河北 邯郸 056015
Constant Speed Casting Improves Slab Quality
摘要 以连铸为中心组织生产,提高钢水成分命中率,减少钢水中S、P和夹杂物质量分数,提高中包温度命中率,选择合适的目标拉速,保证生产节奏稳定,优化保护渣性能,提高连铸操作水平,加强连铸设备保障能力等可以提高连铸恒速率。恒拉速操作可以提高连铸坯表面质量和内部质量。
关键词 :
恒拉速 ,
板坯 ,
连铸 ,
质量
Abstract :Constant speed casting was put on the base, such as the center position of continuous casting, increasing the shoot straight of composition, reducing the content of S or P and inclusion in the steel, increasing the shoot straight of temperature in tundish, choosing a suitable casting speed, optimizing the performance of powder, improving the operating level and enhancing the capability of equipment. Constant speed casting can improve the surface and interior quality of the slab.
Key words :
constant speed casting
slab
continuous casting
quality
收稿日期: 2011-10-31
出版日期: 2012-04-15
通讯作者:
王洪兴
E-mail: whxing2007@163.com
[1]
曹磊,王玉民,丁中,刘飞,张辉. 开浇第一炉连铸坯夹杂物形成原因与控制措施 [J]. , 2014, 24(2): 9-13.
[2]
鲍磊,韩自力,张银花,高怡斐,董瀚,周清跃. 高速铁路钢轨质量评估 [J]. , 2014, 24(11): 9-13.
[3]
刘健,刘青,王彬,王宝 ,邹草云. 加热炉工序的配置与调度优化研究 [J]. , 2014, 24(11): 53-57.
[4]
耿赛晓. 低碳冷轧用钢SPHC不同冶炼工艺的对比 [J]. , 2014, 24(10): 42-45.
[5]
陈玉鑫 王莉 罗磊 李向奎 薛勇强. 采用六西格玛工具改善板坯表面质量的实践 [J]. , 2014, 24(10): 60-65.
[6]
金百刚,王军,李立勋,李超,贾东升,苏宽. 电磁制动技术在板坯连铸过程中的应用 [J]. , 2014, 24(1): 29-33.
[7]
殷瑞钰. 新世纪以来中国炼钢-连铸的进步及命题 [J]. , 2014, 24(08): 1-9.
[8]
耿明山 刘艳 黄衍林 . 大型特厚板坯料制造技术现状和发展趋势 [J]. , 2014, 24(08): 10-17.
[9]
赵艳玲,王淑满,王洪兴,常立山. X80管线钢的生产实践 [J]. , 2014, 24(08): 26-29.
[10]
BURGMANN Wilhelm,GUSTAFSON Thore,DAVEN Jen. 钢水脱气用真空泵系统的选择 [J]. , 2014, 24(08): 55-61.
[11]
冯光宏, 张宏亮, 张培. 国内外特殊钢轧制与产品质量控制的技术进展 [J]. Journal of Materials Sciences & Technology, 2013, 23(9): 1-6.
[12]
周伟基, 魏仁杰, 韩志远. 高档汽车齿轮钢冶炼工艺研究 [J]. Journal of Materials Sciences & Technology, 2013, 23(8): 5-8.
[13]
吴启常, 王筱留. 炉缸长寿的关键在于耐火材料质量的突破 [J]. Journal of Materials Sciences & Technology, 2013, 23(7): 11-16.
[14]
李丰功, 战东平, 张佩灿, 姜周华, 王博, 张思勋, 韩文习. 脱氧合金化工艺对高铝钢中夹杂物的影响 [J]. Journal of Materials Sciences & Technology, 2013, 23(7): 21-23.
[15]
金百刚, 李立勋, 魏春新, 赵雷, 黄玉平, 马立国, 刘文飞. 板坯结晶器电磁制动技术对液面波动的影响 [J]. Journal of Materials Sciences & Technology, 2013, 23(7): 40-44.