大型原油储罐用12MnNiVR中厚钢板研制与开发
李志恩
太钢集团临汾钢铁有限公司技术中心, 山西 临汾 041000
Research and Development of l2MnNiVR Steel Used for Large Storage Tank
摘要 主要就大型原油储罐用12MnNiVR钢板的技术条件要求、成分设计、工艺设计思路、力学性能试验结果、微观组织检验结果、焊接性能评价结果进行了分析和阐述。从产品最终性能来看,各项指标均达到或超过了标准要求,完全满足原油储罐用钢板的技术要求。钢板经SR处理后,强度、冲击等各项性能无明显变化。
关键词 :
12MnNiVR钢 ,
技术条件 ,
生产工艺 ,
力学性能
Abstract :This paper analyzed and expounded the technical requirements, component design, process design, mechanical properties, microstructure and welding performance of l2MnNiVR steel used for large storage tank. The performances of final product achieve or exceed the standards and fully meet the technical requirements of steel plate tanks. The strength, impact and other performance of steel plate did not change after SR treated.
Key words :
12MnNiVR steel
technical requirements
production process
mechanical properties
收稿日期: 2011-06-20
出版日期: 2012-04-15
通讯作者:
李志恩
E-mail: zhoufang319@sina.com
[1]
潘辉,王昭东,李飞,郭佳,包春林,邓想涛. 700MPa级高强工程机械用钢产品设计和生产实践 [J]. , 2014, 24(10): 1-6.
[2]
陈子刚,马有辉. 中厚板温度场的分步解析求解方法及应用 [J]. , 2014, 24(1): 14-17.
[3]
郑少波. 氢冶金基础研究及新工艺探索 [J]. Journal of Materials Sciences & Technology, 2012, 22(7): 1-6.
[4]
王 伦, 宋仁伯, 吴新朗, 牛 涛, 武军宽, 谢天伟. 首钢迁钢抗HIC管线钢X65MS的生产实践 [J]. Journal of Materials Sciences & Technology, 2012, 22(6): 40-44.
[5]
阳代军 , 马耀峰 , 王文广, 徐 彬. 首钢低残余应力开平船板的生产工艺及变形分析 [J]. Journal of Materials Sciences & Technology, 2012, 22(12): 10-14.
[6]
欧阳瑜, 李 力, 刘海强, 王新志. 优质冷轧基料SPCC生产工艺优化研究 [J]. Journal of Materials Sciences & Technology, 2011, 21(8): 30-33.
[7]
成旭东, 唐志军, 徐学良. ML08AL冷镦钢生产实践 [J]. Journal of Materials Sciences & Technology, 2011, 21(12): 42-44.
[8]
曾周燏, 崔青玲, 陈礼清, 朱伏先, 刘相华. 形变热处理工艺对403Nb马氏体耐热钢组织和性能的影响 [J]. Journal of Materials Sciences & Technology, 2011, 21(12): 20-23.
[9]
张 凯,邱春林,杜林秀,吴 迪. 组织状态对X120管线钢力学性能的影响 [J]. Journal of Materials Sciences & Technology, 2010, 20(12): 9-14.
[10]
罗森1 ,祭程1 ,朱苗勇1 ,谭建平1 ,胡黎宁2 ,钟保军2. 基于凝固传热模型的轴承钢GCr15二冷研究与应用 [J]. Journal of Materials Sciences & Technology, 2009, 19(8): 1-1.
[11]
丁昊1 ,丁桦1,2 ,张淑娟1 ,唐正友1 ,杨平3. 热轧高锰TRIP/TWIP钢组织性能研究 [J]. Journal of Materials Sciences & Technology, 2009, 19(6): 5-5.
[12]
张德才. HRB400(Nb)钢筋的生产实践 [J]. Journal of Materials Sciences & Technology, 2008, 18(4): 12-12.
[13]
杨洪波1 ,马宝国2 ,朱伏先1 ,刘相华1. GCr15球化退火行为和力学性能的研究 [J]. Journal of Materials Sciences & Technology, 2008, 18(10): 20-20.
[14]
李光强,董廷亮. 高氮钢的基础研究及应用进展 [J]. Journal of Materials Sciences & Technology, 2007, 17(7): 5-5.
[15]
王启1 ,董胜峰2 ,葛新建1. 济钢1700 mm中薄板坯连铸连轧生产实践 [J]. Journal of Materials Sciences & Technology, 2007, 17(6): 13-13.