连铸钢包下渣检测技术的发展
连文敬
宝钢股份公司炼钢厂,上海 200941
Development of the Ladle Slag Carry-Over Detection Technology in Continuous Casting
摘要 钢包下渣检测技术在连铸生产中具有重要意义,它可以有效地提高铸坯质量、增加钢水收得率以及改善劳动条件。简述了目前国内外钢包下渣检测技术的原理和研究现状,包括电磁检测法、振动检测法、超声波检测法和红外检测法等,以及这些方法在工业生产中的应用效果和存在的主要问题,对上述钢包下渣检测方法的应用前景进行了展望。
关键词 :
连铸 ,
钢包 ,
下渣检测 ,
传感器
Abstract :The ladle slag carry-over detection technology plays an important role in continuous casting, which can improve casting quality, increase yield and improve working conditions. The principles and research status of ladle slag detection technique are described in this paper, including electromagnetic detection, vibration detection, ultrasonic detection and infrared detection etc. The application effect and the main problems about these methods are also described in this paper. The prospect of development of the above mentioned methods are briefly discussed.
Key words :
continuous casting
ladle
slag carry-over detection
sensor
收稿日期: 2011-04-20
出版日期: 2011-08-18
通讯作者:
连文敬
E-mail: lian2008win@126.com
[1]
刘志远,王重君,刘礼龙. 新型纳米级微孔隔热材料在炼钢生产中的应用 [J]. , 2014, 24(3): 52-57.
[2]
曹磊,王玉民,丁中,刘飞,张辉. 开浇第一炉连铸坯夹杂物形成原因与控制措施 [J]. , 2014, 24(2): 9-13.
[3]
金百刚,王军,李立勋,李超,贾东升,苏宽. 电磁制动技术在板坯连铸过程中的应用 [J]. , 2014, 24(1): 29-33.
[4]
殷瑞钰. 新世纪以来中国炼钢-连铸的进步及命题 [J]. , 2014, 24(08): 1-9.
[5]
韩继强, 王彦祥, 许红玉. 中间包温度优化工艺实践 [J]. Journal of Materials Sciences & Technology, 2013, 23(8): 34-37.
[6]
杨荣光, 王志刚. 超低硫钢精炼工艺生产实践 [J]. Journal of Materials Sciences & Technology, 2013, 23(5): 34-37.
[7]
潘贻芳, 祭程, 张晓博, 蔡兆镇, 罗森, 朱苗勇. 宽厚板坯连铸二冷工艺开发与应用 [J]. Journal of Materials Sciences & Technology, 2012, 22(9): 42-46.
[8]
王阳. X80连铸板坯角部裂纹的生产实践与分析 [J]. Journal of Materials Sciences & Technology, 2012, 22(9): 47-50.
[9]
彭其春 , 于学森 , 熊 伟 , 盛喜松 , 罗传清 , 刘 俊. 不同浇铸阶段低碳钢连铸板坯洁净度研究 [J]. Journal of Materials Sciences & Technology, 2012, 22(8): 17-21.
[10]
刘春, 姜茂发, 金百刚, 王军. 电磁搅拌对高碳钢铸坯质量的影响 [J]. Journal of Materials Sciences & Technology, 2012, 22(5): 10-12.
[11]
刘增勋, 张海辉, 刘建敏, 安振亮. 方坯结晶器内气隙分布的数值分析 [J]. Journal of Materials Sciences & Technology, 2012, 22(5): 13-17.
[12]
蔡开科,孙彦辉,田志红. 炼钢-精炼-连铸过程钢水超纯净度控制战略 [J]. Journal of Materials Sciences & Technology, 2012, 22(4): 1-7.
[13]
王洪兴. 板坯连铸恒拉速浇铸提高铸坯质量 [J]. Journal of Materials Sciences & Technology, 2012, 22(4): 45-48.
[14]
陈洪智, 常运合, 张家泉 , 谢茂恩, 杨 东, 李六一. 不锈钢板坯连铸自由线收缩与辊缝研究 [J]. Journal of Materials Sciences & Technology, 2012, 22(2): 25-30.
[15]
祭 程, 蒋 毅, 肖文忠, 朱苗勇, 曹学欠, 谭建平. 连铸拉矫机辊缝在线标定方法研究与应用 [J]. Journal of Materials Sciences & Technology, 2012, 22(2): 10-13.