南钢80级帘线钢的开发
李玉华,郑建强,林国强
南京钢铁联合有限公司研发中心, 江苏 南京210035
The Development of 80 Grade Steel Cord in NISCO
摘要 介绍了帘线钢的技术要求,并立足于南钢目前的装备条件,进行了80级帘线钢的研究和开发,解决了夹杂物要求严、连铸中心偏析低、组织控制要求高,以及力学性能质量高等一系列难题,使80级帘线钢产品满足了帘线生产企业的要求。
关键词 :
帘线钢 ,
盘条 ,
偏析 ,
夹杂物 ,
晶界渗碳体
Abstract :The technical requirement of steel cord was introduced in this paper., The 80 grade steel cord was studied and developed at the base of current equipment in NISCO. A series of problems such as strict requirement of inclusions and structure control, low center segregation, high mechanical property etc. have been solved. The products of 80 grade steel tire satisfy the requirement of steel cord producing enterprises.
Key words :
steel cord
wire rod
segregation
inclusion
grain boundary cementite
收稿日期: 2010-07-13
出版日期: 2011-08-18
通讯作者:
李玉华
E-mail: luckyliyuhua@163.com
[1]
熊伟,彭其春,范丹萍,于学森,邱雷,杨进玲. 低碳铝镇静钢连铸头坯夹杂物 [J]. , 2014, 24(5): 14-17.
[2]
张广杰,张飞. 无钙处理条件下轴承钢钢水可浇性技术的研究与应用 [J]. , 2014, 24(5): 40-44.
[3]
余国松. 1215MS易切削钢盘条翘皮成因 [J]. , 2014, 24(4): 26-30.
[4]
曹磊,王玉民,丁中,刘飞,张辉. 开浇第一炉连铸坯夹杂物形成原因与控制措施 [J]. , 2014, 24(2): 9-13.
[5]
傅向葵,傅一迪. 基于人工智能非金属夹杂物的检测与研究 [J]. , 2014, 24(11): 14-17.
[6]
兰鹏 ,李鹏善 ,刘春秀 ,张家泉 ,张瑞天. 基于凝固数值模拟的13t扁锭结构设计与优化 [J]. , 2014, 24(10): 22-31.
[7]
王华 赵张发 兰鹏 宋丽娜. 18CrMnB齿轮钢棒材中硬质点相成因探究 [J]. , 2014, 24(09): 10-14.
[8]
王鑫潮,王红娜,成国光,寇玉山,左辉,陈列. 20Cr13不锈钢热轧棒材夹杂物研究 [J]. , 2014, 25(07): 17-21.
[9]
续飞飞,程树森. 冷轧过程轧板内圆形夹杂物变形 [J]. , 2014, 25(07): 36-41.
[10]
汪先虎,蒋艳菊,李海宝,倪勤胜,丁勇,林丽. 焊接用钢化学成分检验偏差的差异化分析 [J]. , 2014, 25(07): 42-47.
[11]
周伟基, 魏仁杰, 韩志远. 高档汽车齿轮钢冶炼工艺研究 [J]. Journal of Materials Sciences & Technology, 2013, 23(8): 5-8.
[12]
张彩东, 杨晓江, 王 峰, 张大勇. 唐钢RH钢水洁净度分析与研究 [J]. Journal of Materials Sciences & Technology, 2013, 23(8): 9-13.
[13]
李丰功, 战东平, 张佩灿, 姜周华, 王博, 张思勋, 韩文习. 脱氧合金化工艺对高铝钢中夹杂物的影响 [J]. Journal of Materials Sciences & Technology, 2013, 23(7): 21-23.
[14]
赵圣功. 叉车用门架槽钢Q420C质量控制与改进 [J]. Journal of Materials Sciences & Technology, 2013, 23(11): 27-31.
[15]
彭其春 , 于学森 , 熊 伟 , 盛喜松 , 罗传清 , 刘 俊. 不同浇铸阶段低碳钢连铸板坯洁净度研究 [J]. Journal of Materials Sciences & Technology, 2012, 22(8): 17-21.