连铸保护渣性能研究进展
铁生年1 ,张芬娟2 ,陈列3 ,李昀珺1 ,李星1
1.青海大学先进材料与应用技术重点实验室,青海 西宁 810016; 2.青海省产品质量监督检验所,青海 西宁 810008; 3. 西宁特殊钢股份公司,青海 西宁 810005
Researching Progress in Characters of Mould Powder of Casting
IE Shengnian1 ,ZHANG Fenjuan2 ,CHEN Lie3 ,LI Yunjun1 ,LI Xing1
1.Key Laboratory of Advanced Materials and Applied Technology, Qinghai University, Xining 810016, Qinghai, China; 2.Institute of Test Product Quality Intendance of Qinghai Province, Xining 810008, Qinghai, China; 3.Stock Company of Special Steel in Xining, Xining 810005, Qinghai, China
摘要 连铸保护渣性能直接影响钢材表面质量。本文综述了保护渣化学组成、保护渣矿物组成、保护渣熔化性能、保护渣熔渣池深度性能、保护渣熔渣的渗入和均匀性、高拉速连铸保护渣的研制、保护渣熔渣的黏度性能的研究技术成果及应用。
关键词 :
连铸保护渣 ,
性能 ,
研究技术
Abstract :Characters of mould powder of casting influence steel surface. this paper mainly summarize studies on technology production of chemical composition of mould powder, mineral composition of mould powder, melt performance of mould powder, melt powder depth characters,uniformity and leakage characters of mould powder 、prepare of mould powder of high speed casting、viscidity of mould powder.
Key words :
casting mould powder
characters
researching
收稿日期: 1900-01-01
引用本文:
铁生年1 ,张芬娟2 ,陈列3 ,李昀珺1 ,李星1. 连铸保护渣性能研究进展[J]. 中国冶金, 2008, 18(12): 1-1.
IE Shengnian1 ,ZHANG Fenjuan2 ,CHEN Lie3 ,LI Yunjun1 ,LI Xing1 . Researching Progress in Characters of Mould Powder of Casting. China Metallurgy, 2008, 18(12): 1-1.
链接本文:
http://www.zgyj.ac.cn/CN/ 或 http://www.zgyj.ac.cn/CN/Y2008/V18/I12/1
[1]
贵永亮 刘连继 肖洪 胡宾生 李晓云. 固体燃料种类和配比对烧结矿质量的影响 [J]. , 2014, 24(5): 5-8.
[2]
潘辉,王昭东,李飞,郭佳,包春林,邓想涛. 700MPa级高强工程机械用钢产品设计和生产实践 [J]. , 2014, 24(10): 1-6.
[3]
张浩,潘世群. 氮对钒微合金化钢筋组织与性能的影响 [J]. , 2014, 24(1): 11-13.
[4]
陈子刚,马有辉. 中厚板温度场的分步解析求解方法及应用 [J]. , 2014, 24(1): 14-17.
[5]
张登科,刘来宝,李素娥,张礼华. 利用碳铬渣制备耐火浇注料的试验 [J]. , 2014, 24(08): 46-50.
[6]
李效华,孙宇,张传友,赵晓林,韩进山. 大口径无缝管线管的制造及抗应力腐蚀性 [J]. , 2014, 24(06): 40-46.
[7]
彭其春, 于学森, 熊伟, 范丹萍, 邱雷, 王理猷. 探讨硼对钢力学性能的影响 [J]. Journal of Materials Sciences & Technology, 2013, 23(9): 17-18.
[8]
王韶光, 王晓春, 于大海, 李春雷. FTSR线钛微合金化Q345B/C的工艺与组织性能 [J]. Journal of Materials Sciences & Technology, 2013, 23(7): 28-32.
[9]
杨作宏, 程子建. 超纯铁素体不锈钢新品种研发与应用 [J]. Journal of Materials Sciences & Technology, 2013, 23(5): 17-21.
[10]
孙恺, 李福民, 陈 伟, 伊凤永, 吕庆. 巴西矿和澳矿的烧结性能试验 [J]. Journal of Materials Sciences & Technology, 2013, 23(5): 22-25.
[11]
孙艳芹 , 王瑞哲, 吕 庆, 刘 然. TiO 2 质量分数对中钛型烧结矿质量影响的研究 [J]. Journal of Materials Sciences & Technology, 2013, 23(10): 6-9.
[12]
唐兴昌, 薄艳艳, 陈建新, 廖志, 康永林. 2250热连轧生产高级别管线钢的工艺控制与组织性能 [J]. Journal of Materials Sciences & Technology, 2012, 22(9): 15-19.
[13]
张鹤松, 康永林, 孟德亮, 夏佃秀, 安守勇. X80抗大变形管线钢的生产工艺与组织性能研究 [J]. Journal of Materials Sciences & Technology, 2012, 22(9): 10-14.
[14]
王 伦, 宋仁伯, 吴新朗, 牛 涛, 武军宽, 谢天伟. 首钢迁钢抗HIC管线钢X65MS的生产实践 [J]. Journal of Materials Sciences & Technology, 2012, 22(6): 40-44.
[15]
张宝惠,李效华. 高钢级低温无缝管线管的开发 [J]. Journal of Materials Sciences & Technology, 2012, 22(4): 26-29.