基于改进模糊ART神经网络的连铸漏钢预报模型
赵琦,朱苗勇
东北大学材料与冶金学院,辽宁 沈阳 110004
Breakout Prediction Model Based on Improved Fuzzy ART Neural Network for Continuous Casting Process
ZHAO Qi, ZHU Miaoyong
School of Materials and Metallurgy, Northeastern University, Shenyang 110004, Liaoning, China
摘要 在模糊ART神经网络的基础上,有机结合模糊模式识别和模糊聚类算法,并通过引入新的学习机制和优化网络结构,建立了改进的新型模糊ART神经网络模型;同时,结合某钢厂连铸现场采集的历史数据,将该模型应用于连铸漏钢预报过程中。其结果表明,该模型对粘结漏钢过程中2种典型温度模式的预报率分别达到956%和978%,报出率都达到100%,且在避免漏报的同时保证了较低的误报率,能准确识别典型的温度模式和预测拉漏事故的发生。
关键词 :
连铸 ,
漏钢预报 ,
模糊神经网络 ,
模糊聚类
Abstract :Based on fuzzy ART neural network, fuzzy pattern recognition and fuzzy clustering algorithm, an improved fuzzy ART neural network model was presented by introducing a new learning method and optimizing the structure of network. The model was applied to the breakout prediction of continuous casting with history data acquired in a steel work. The results show that the model is effective in identifying two typical temperature patterns of sticking breakout and detecting possible leakages of liquid steel with the prediction rate of 95.6% and 97.8%, respectively. The quote rate of both pattern reach to 100%.
Key words :
continuous casting
breakout prediction
fuzzy neural network
fuzzy clustering
收稿日期: 1900-01-01
[1]
曹磊,王玉民,丁中,刘飞,张辉. 开浇第一炉连铸坯夹杂物形成原因与控制措施 [J]. , 2014, 24(2): 9-13.
[2]
金百刚,王军,李立勋,李超,贾东升,苏宽. 电磁制动技术在板坯连铸过程中的应用 [J]. , 2014, 24(1): 29-33.
[3]
殷瑞钰. 新世纪以来中国炼钢-连铸的进步及命题 [J]. , 2014, 24(08): 1-9.
[4]
潘贻芳, 祭程, 张晓博, 蔡兆镇, 罗森, 朱苗勇. 宽厚板坯连铸二冷工艺开发与应用 [J]. Journal of Materials Sciences & Technology, 2012, 22(9): 42-46.
[5]
王阳. X80连铸板坯角部裂纹的生产实践与分析 [J]. Journal of Materials Sciences & Technology, 2012, 22(9): 47-50.
[6]
彭其春 , 于学森 , 熊 伟 , 盛喜松 , 罗传清 , 刘 俊. 不同浇铸阶段低碳钢连铸板坯洁净度研究 [J]. Journal of Materials Sciences & Technology, 2012, 22(8): 17-21.
[7]
刘春, 姜茂发, 金百刚, 王军. 电磁搅拌对高碳钢铸坯质量的影响 [J]. Journal of Materials Sciences & Technology, 2012, 22(5): 10-12.
[8]
刘增勋, 张海辉, 刘建敏, 安振亮. 方坯结晶器内气隙分布的数值分析 [J]. Journal of Materials Sciences & Technology, 2012, 22(5): 13-17.
[9]
蔡开科,孙彦辉,田志红. 炼钢-精炼-连铸过程钢水超纯净度控制战略 [J]. Journal of Materials Sciences & Technology, 2012, 22(4): 1-7.
[10]
王洪兴. 板坯连铸恒拉速浇铸提高铸坯质量 [J]. Journal of Materials Sciences & Technology, 2012, 22(4): 45-48.
[11]
陈洪智, 常运合, 张家泉 , 谢茂恩, 杨 东, 李六一. 不锈钢板坯连铸自由线收缩与辊缝研究 [J]. Journal of Materials Sciences & Technology, 2012, 22(2): 25-30.
[12]
祭 程, 蒋 毅, 肖文忠, 朱苗勇, 曹学欠, 谭建平. 连铸拉矫机辊缝在线标定方法研究与应用 [J]. Journal of Materials Sciences & Technology, 2012, 22(2): 10-13.
[13]
杨凌霄, 吴奇, 周换章. 4200 mm轧机AGC的模糊神经网络滑模控制 [J]. Journal of Materials Sciences & Technology, 2012, 22(1): 45-48.
[14]
王洪兴, 刘志国. 板坯连铸机粘结漏钢分析与预防措施 [J]. Journal of Materials Sciences & Technology, 2011, 21(9): 30-35.
[15]
连文敬. 连铸钢包下渣检测技术的发展 [J]. Journal of Materials Sciences & Technology, 2011, 21(8): 8-11.