酸再生提高氧化铁粉质量浅析
乔梁,李霸宇,徐敏
邯郸钢铁集团公司冷轧厂,河北 邯郸 056013
Analysis of Quality Improvement of Ferric Oxide Powder inHydrochloric Acid Regeneration Plan
QIAO Liang,LI Bayu,XU Min
Cold Rolling Mill, Handan Iron and Steel Co Ltd, Handan 056013, Hebei, China
摘要 介绍了邯钢冷轧厂所引进的ANDRITZ酸再生生产工艺;结合该厂酸再生运行情况,分析了影响酸再生副产氧化铁粉质量的因素;并提出了提高氧化铁粉质量的方法且加以实施,使氧化铁粉质量达到生产软磁用粉标准。
关键词 :
酸再生 ,
脱硅 ,
氧化铁粉 ,
质量 ,
工艺参数
Abstract :The article introduces the process of hydrochloric acid regeneration introduced from ANDRITZ by hangang cold rolling mill. The influence factors of ferric oxide powder quality are analyzed and the method to improve quality of ferric oxide powder is adopted. The ferric oxide powder quality of our factory has been up to the standard of production of soft magnetic material by adjustment the factors.
Key words :
hydrochloric acid regeneration
desilicon
ferric oxide powder
quality
technological parameter
收稿日期: 1900-01-01
[1]
周民,陈莹卷,闵建军,马靳江,牛强. 高速线材减定径多道次孔型轧制有限元分析及工艺参数优化 [J]. , 2014, 24(3): 4-8.
[2]
鲍磊,韩自力,张银花,高怡斐,董瀚,周清跃. 高速铁路钢轨质量评估 [J]. , 2014, 24(11): 9-13.
[3]
耿赛晓. 低碳冷轧用钢SPHC不同冶炼工艺的对比 [J]. , 2014, 24(10): 42-45.
[4]
BURGMANN Wilhelm,GUSTAFSON Thore,DAVEN Jen. 钢水脱气用真空泵系统的选择 [J]. , 2014, 24(08): 55-61.
[5]
冯光宏, 张宏亮, 张培. 国内外特殊钢轧制与产品质量控制的技术进展 [J]. Journal of Materials Sciences & Technology, 2013, 23(9): 1-6.
[6]
周伟基, 魏仁杰, 韩志远. 高档汽车齿轮钢冶炼工艺研究 [J]. Journal of Materials Sciences & Technology, 2013, 23(8): 5-8.
[7]
吴启常, 王筱留. 炉缸长寿的关键在于耐火材料质量的突破 [J]. Journal of Materials Sciences & Technology, 2013, 23(7): 11-16.
[8]
李丰功, 战东平, 张佩灿, 姜周华, 王博, 张思勋, 韩文习. 脱氧合金化工艺对高铝钢中夹杂物的影响 [J]. Journal of Materials Sciences & Technology, 2013, 23(7): 21-23.
[9]
孙恺, 李福民, 陈 伟, 伊凤永, 吕庆. 巴西矿和澳矿的烧结性能试验 [J]. Journal of Materials Sciences & Technology, 2013, 23(5): 22-25.
[10]
刘精宇, 蔡九菊, 杨靖辉. 蒸气介质能量流网络的动态分析研究 [J]. Journal of Materials Sciences & Technology, 2013, 23(4): 47-50.
[11]
林安川,唐德元,李志刚,朱兰云,陈元富. 红钢1350m3 高炉品位劣化下的强化生产实践与分析 [J]. Journal of Materials Sciences & Technology, 2013, 23(11): 38-43.
[12]
孙艳芹 , 王瑞哲, 吕 庆, 刘 然. TiO 2 质量分数对中钛型烧结矿质量影响的研究 [J]. Journal of Materials Sciences & Technology, 2013, 23(10): 6-9.
[13]
黄先佑. 攀钢捣固炼焦试验研究 [J]. Journal of Materials Sciences & Technology, 2013, 23(10): 14-16.
[14]
陈 良 , 焦玉莉 , 黄优明. 20CrMnTiH齿轮钢可浇性研究与实践 [J]. Journal of Materials Sciences & Technology, 2012, 22(8): 40-43..
[15]
何木光, 肖 均, 杜斯宏, 李 程. 提高攀钢钒360 m 2 烧结机产质量的实践 [J]. Journal of Materials Sciences & Technology, 2012, 22(8): 30-35.