烧结新型布料技术在400 m2烧结机上的应用
高居安,王剑锋,李立新,王云
邯郸钢铁集团有限责任公司炼铁部,河北 邯郸 056015
Application of New Type Strand Feeding Technique in400 m2 Sintering Plant
GAO Juan,WANG Jianfeng,LI Lixin,WANG Yun
Ironmaking Department, Handan Iron and Steel Group Co Ltd, Handan 056015, Hebei, China
摘要 分析了邯钢400 m2烧结机原布料系统存在的问题,详述了烧结新型布料的技术特点。烧结机新型布料系统由宽皮带给料机和九辊布料器组成。该系统使用后,烧结料层布料合理,透气性改善,烧结矿产量大幅度提高。
关键词 :
烧结 ,
宽皮带给料机 ,
九辊布料器 ,
透气性
Abstract :Old strand feeding system was analyzed in 400 m2 sintering plant and characteristic of new type strand feeding distribution technique was described. The new type strand feeding system includes the wide feeding strap and the nine roller feeder. Structure of sintering layer distributing and permeability are improved. Output of sinter is increased.
Key words :
sintering
wide feeding strap
the nine roller feeder
permeability
收稿日期: 1900-01-01
[1]
贵永亮 刘连继 肖洪 胡宾生 李晓云. 固体燃料种类和配比对烧结矿质量的影响 [J]. , 2014, 24(5): 5-8.
[2]
安波 ,岳强 姚应林,柯显峰. 基于低成本炼铁过程控制的研究实践 [J]. , 2014, 24(5): 35-39.
[3]
蒋大军,宋剑,何木光,杜斯宏. 钒钛磁铁矿烧结降低返矿率技术研究与实践 [J]. , 2014, 24(4): 39-44.
[4]
王代军. 首钢京唐大型烧结机成功应用与烧结生产实践 [J]. , 2014, 24(2): 30-35.
[5]
邹雷雷 ,吕庆,刘东辉,陈树军,李凤臣,白瑞国. 混合矿基础特性对钒钛烧结矿RDI的影响 [J]. , 2014, 24(10): 11-15.
[6]
邹雷雷 ,吕庆,刘东辉,陈树军,李凤臣,白瑞国. 基于加权灰色关联度法分析印尼海砂最佳配比的研究 [J]. , 2014, 24(09): 6-9.
[7]
万新宇,吕庆,陈树军,冯帅. 酸、碱料超厚料层混合烧结试验 [J]. , 2014, 24(09): 33-38.
[8]
贺淑珍,冯焕林. 高比例精矿粉对烧结的影响分析及强化措施探讨 [J]. , 2014, 25(07): 27-31.
[9]
何木光. 控制钒钛磁铁烧结矿FeO含量的方法 [J]. , 2014, 25(07): 32-35.
[10]
王岳飞. 邯钢烧结余热利用新工艺与生产实效 [J]. Journal of Materials Sciences & Technology, 2013, 23(7): 48-50.
[11]
王俊山, 周明顺, 翟立委, 刘杰, 张辉. 鞍钢烧结配加巴西南部粉矿实验研究 [J]. Journal of Materials Sciences & Technology, 2013, 23(5): 26-29.
[12]
孙恺, 李福民, 陈 伟, 伊凤永, 吕庆. 巴西矿和澳矿的烧结性能试验 [J]. Journal of Materials Sciences & Technology, 2013, 23(5): 22-25.
[13]
刘文超, 蔡九菊, 董 辉, 张 琦, 齐国超. 烧结过程余热资源高效回收与利用的热力学分析 [J]. Journal of Materials Sciences & Technology, 2013, 23(2): 15-20.
[14]
何木光, 肖 均, 郭 刚, 宋 剑. 大富矿配比高碱度钒钛矿烧结制度研究 [J]. Journal of Materials Sciences & Technology, 2013, 23(2): 21-25.
[15]
姜杉杉, 王代军. 四川德胜260 m2 烧结工程设计及提高烧结矿强度生产实践 [J]. Journal of Materials Sciences & Technology, 2013, 23(2): 29-33.