优质冷轧基料SPCC生产工艺优化研究
欧阳瑜, 李 力, 刘海强, 王新志
安阳钢铁集团公司第二炼轧厂,河南 安阳455000
Optimized Production Process of SPCC Quality Cold-rolled Base Material
摘要 结合SPCC钢种对成分及工艺力学性能的要求,对低碳低硅铝镇静如何选择工艺路线进行了科学论证;并从成分控制、温度控制及钢水可浇性控制等方面进行了详细分析,分析认为:转炉终点[C]按0.04%~0.05%,RH到站[O]控制在500×10-6~700×10-6,终点温度控制在1 670 ℃以上,同时保证钢包渣内的w(TFe+MnO)小于4.0%~5.0%时,RH脱氧合金化后纯环流时间不低于6 min,稳定中包过热度在15~30℃是保证冶炼生产的关键。
关键词 :
SPCC ,
生产工艺 ,
工艺分析 ,
流程
Abstract :The composition, temperature and the pouring of SPCC steel were discussed, combined the requirements of mechanical performance of steel and low silicon Al-killed low-carbon technology routs. The result showed that the keys to ensure refining production are as forlows, BOF endpoint [C] by 0.04%~0.05%, [O] of the steel in the 500×10-6 ~700×10-6 when the ladle arrives RH, the end temperature at 1 670 ℃ or more. While ensuring the w(TFe+MnO) in slag is less than 4.0%~5.0%, the pure circulation time of RH deoxidization alloying is not less than 6 min, and the superheat of tundish is in the 15~30 ℃ .
Key words :
SPCC
Production process
Process analysis
Process
收稿日期: 2010-10-12
出版日期: 2011-08-18
通讯作者:
欧阳瑜
E-mail: wangxin002003@yahoo.com.cn
参考文献
[1]
刘海强. 低碳低硅铝镇静钢的夹杂物控制工艺计算与分析[J]. 河南冶金,2010(6):19
[2]
孙玉强 刘社牛 苏伯辉.安钢低碳低硅钢SPHC生产工艺研究[J].河南冶金,2008,04:40
[3]
刘中柱,蔡开科. BOF-RH-CC生产低碳铝镇静钢洁净度研究[J]. 钢铁,2001(4):23
[1]
郁祖达,叶林,潘永飞. 试论宝钢湛江钢铁炼钢厂工艺布局的创新设计 [J]. , 2014, 24(2): 44-47.
[2]
韩自博,张硕,张宇,张健,刘银梅. 矿渣超细粉应用和生产现状概述 [J]. , 2014, 24(06): 6-11.
[3]
龚 伟, 战东平, 姜周华, 宋满堂, 钟晓丹. 转炉流程生产高品质轴承钢的实践 [J]. Journal of Materials Sciences & Technology, 2013, 23(4): 35-39.
[4]
郑少波. 氢冶金基础研究及新工艺探索 [J]. Journal of Materials Sciences & Technology, 2012, 22(7): 1-6.
[5]
李志恩. 大型原油储罐用12MnNiVR中厚钢板研制与开发 [J]. Journal of Materials Sciences & Technology, 2012, 22(4): 49-54.
[6]
阳代军 , 马耀峰 , 王文广, 徐 彬. 首钢低残余应力开平船板的生产工艺及变形分析 [J]. Journal of Materials Sciences & Technology, 2012, 22(12): 10-14.
[7]
盛刚,孙彦广,徐化岩,贾天云,郝丽娜. 钢铁联合企业CO2 排放研究综述 [J]. Journal of Materials Sciences & Technology, 2011, 21(7): 1-6.
[8]
王立君, 李法兴, 张君平, 时振明. 提高电炉流程生产含硼钢冶金质量的措施 [J]. Journal of Materials Sciences & Technology, 2011, 21(3): 24-27.
[9]
成旭东, 唐志军, 徐学良. ML08AL冷镦钢生产实践 [J]. Journal of Materials Sciences & Technology, 2011, 21(12): 42-44.
[10]
刘浏. 高品质特殊钢生产流程技术研究 [J]. Journal of Materials Sciences & Technology, 2011, 21(12): 11-14.
[11]
周荣,商桂梅. 工艺过程数据集成与追溯管理在济钢炼钢厂的实现 [J]. Journal of Materials Sciences & Technology, 2011, 21(11): 44-48.
[12]
项钟庸, 欧阳标, 邹忠平. 高炉设计的新体系 [J]. Journal of Materials Sciences & Technology, 2011, 21(1): 12-14.
[13]
殷瑞钰. 从开放系统、耗散结构到钢厂的能量流网络化集成 [J]. Journal of Materials Sciences & Technology, 2010, 20(8): 1-14.
[14]
唐超 黄久贵 李娜. 宝钢1220新建电镀锡机组工艺设备特点 [J]. Journal of Materials Sciences & Technology, 2010, 20(6): 35-35.
[15]
张露 孙开明. 石油管用连铸圆坯质量控制技术的新进展 [J]. Journal of Materials Sciences & Technology, 2010, 20(4): 33-33.