炼钢短流程工艺国内外现状及发展趋势
杨宁川, 黄其明, 何腊梅, 游香米, 吴令
中冶赛迪工程技术股份有限公司炼钢事业部
Domestic and International Status and Development Trend of Steelmaking Compact Process
YANG Ning-chuan, HUANG Qi-ming, HE La-mei, YOU Xiang-mi, WU Ling
Steelmaking Department CISDI Engineering Co., Ltd., Chongqing 400013, China
摘要 概述了电弧炉炼钢短流程的发展和特点,介绍了一些应用得比较成熟的技术如:DRI、热装铁水、废钢预热等在电弧炉短流程炼钢上的应用和新短流程工艺技术研究,并简要分析了中国短流程炼钢的现状,对短流程的发展趋势提出了一些看法。
关键词 :
电弧炉 ,
短流程 ,
炼钢
Abstract :The evolution and characteristics of EAF steelmaking compact process was briefly outlined in this paper, and the application of relatively mature technologies, such as DRI, hot charging of hot iron, scrap preheating, and some research of new compact process were introduced. In addition, the present status of compact process in China was briefly analyzed, and views about development trend of the compact process steelmaking were presented.
Key words :
EAF
compact process
steelmaking
收稿日期: 2010-02-08
出版日期: 2010-04-15
通讯作者:
何腊梅
引用本文:
杨宁川, 黄其明, 何腊梅, 游香米, 吴令. 炼钢短流程工艺国内外现状及发展趋势[J]. 中国冶金, 2010, 20(4): 17-22.
YANG Ning-chuan, HUANG Qi-ming, HE La-mei, YOU Xiang-mi, WU Ling. Domestic and International Status and Development Trend of Steelmaking Compact Process. China Metallurgy, 2010, 20(4): 17-22.
链接本文:
http://www.zgyj.ac.cn/CN/ 或 http://www.zgyj.ac.cn/CN/Y2010/V20/I4/17
[1]
刘志远,王重君,刘礼龙. 新型纳米级微孔隔热材料在炼钢生产中的应用 [J]. , 2014, 24(3): 52-57.
[2]
吴伟. 炼钢造渣物料高温热焓值的试验测定 [J]. , 2014, 24(11): 46-49.
[3]
殷瑞钰. 新世纪以来中国炼钢-连铸的进步及命题 [J]. , 2014, 24(08): 1-9.
[4]
李丰功, 战东平, 张佩灿, 姜周华, 王博, 张思勋, 韩文习. 脱氧合金化工艺对高铝钢中夹杂物的影响 [J]. Journal of Materials Sciences & Technology, 2013, 23(7): 21-23.
[5]
王新华 , 朱国森 , 李海波, 吕延春. 氧气转炉“留渣+双渣”炼钢工艺技术研究 [J]. Journal of Materials Sciences & Technology, 2013, 23(4): 40-46.
[6]
陈伯瑜, 钟良才, 柯建祥, 曾兴富, 赖兆奕, 朱英雄. 顶底侧吹转炉炼钢新技术开发研究 [J]. Journal of Materials Sciences & Technology, 2013, 23(3): 20-25.
[7]
田 蜜, 李海洋. 武钢200 t转炉“负能炼钢”技术的开发及应用 [J]. Journal of Materials Sciences & Technology, 2013, 23(2): 37-39.
[8]
何涛焘, 田 陆, 文华北, 刘卓明, 冯正金, 周存波. 基于炉口火焰信息的转炉炼钢终点预报系统 [J]. Journal of Materials Sciences & Technology, 2013, 23(2): 40-43.
[9]
马国宏,朱荣,刘润藻,张文龙,朱长富. 电弧炉炼钢复合吹炼技术的研究及应用 [J]. Journal of Materials Sciences & Technology, 2013, 23(12): 12-15.
[10]
宋景凌,钟春生,宁建成. 衡钢电弧炉炼钢流程能量的多尺度研究 [J]. Journal of Materials Sciences & Technology, 2013, 23(12): 16-20.
[11]
向宏学1,邵华1,张家泉1,何庆文2,王广连3,申景霞3. 电炉冶炼特殊钢原料铁水比优化控制研究 [J]. Journal of Materials Sciences & Technology, 2013, 23(12): 29-33.
[12]
张军国, 杨晓江, 张大勇, 赵玉刚, 彭素云 . 150 t转炉炼钢工艺参数优化研究与应用 [J]. Journal of Materials Sciences & Technology, 2013, 23(10): 37-40.
[13]
宋文臣, 李 宏, 郭洛方, 李永卿, 冯 佳. 石灰石代替石灰造渣炼钢减排CO2 的研究 [J]. Journal of Materials Sciences & Technology, 2012, 22(6): 49-53.
[14]
蔡开科,孙彦辉,田志红. 炼钢-精炼-连铸过程钢水超纯净度控制战略 [J]. Journal of Materials Sciences & Technology, 2012, 22(4): 1-7.
[15]
杨文远, 张先贵, 杨 勇, 刘路长, 高卫涛. 转炉炼钢利用废钢的研究综述 [J]. Journal of Materials Sciences & Technology, 2012, 22(2): 1-6.