Development of Feeding Wire Technology in Tundish and Mould in China
WANG Litao1,ZHANG Qiaoying2,LI Qinghua3,WANG Quanli1,WANG Xinhua2
1.Shougang Research Institute of Technology, Beijing100041, China; 2. School of Metallurgicaland Ecological Engineering, University of Science and Technology Beijing, Beijing 100083, China; 3.Hangang Continuous Casting and Rolling Mill, Handan 056015,Hebei, China
Abstract:Development of feeding wire into tundish and mould in China is introduced and advantages and disadvantages are analyzed. Adopting this technology the yield of metal can be improved and jam and tumor of shroud can be avoided. But it can affect the performance of covering flux and slag, which is to be further improved.
王立涛1 ,张乔英2 ,李庆华3 ,王全礼1 ,王新华2. 国内连铸中间包和结晶器喂丝技术的发展[J]. 中国冶金, 2006, 16(11): 12-12.
WANG Litao1,ZHANG Qiaoying2,LI Qinghua3,WANG Quanli1,WANG Xinhua2. Development of Feeding Wire Technology in Tundish and Mould in China. China Metallurgy, 2006, 16(11): 12-12.