Feasibility analysis on adding bag dust of material feeding system to coal injected into blast furnace
WANG Gang1, XU Kun2, WANG Guang-wei2, WU Yao-chun1
1. Feeding Operation Department, Shougang Jingtang United Iron and Steel Co., Ltd., Tangshan 063210, Hebei, China; 2. School of Metallurgical and Ecological Engineering, University of Science and Technology Beijing, Beijing 100083, China
Abstract:The rational use of bag dust has always been one of the problems faced by iron and steel plants. Metallurgical companies in China mix coke dry quenching(CDQ) dust into injection coal for blast furnace in recent years, realizing the resourceful use of bag dust. In order to clarify the difference of technological performance for different bag dust in blast furnace injection and improve the absorbing ability of bag dust in blast furnace, the feasibility for blast furnace injection of CDQ dust CC9 and bag dust of material feeding system C8 and CCJ1, which were produced by Shougang Jingtang Company, and their mixed samples with blast furnace pulverized coal were analyzed, and industrial tests in Shougang Jingtang No.3 blast furnace were carried out according to the research results. The results show that the three kinds of bag dust all have high fixed carbon content and low volatile matter, and the combustion performance is worse than that of blast furnace pulverized coal injection. When the mixing ratio does not exceed 5%, the combustion curves of CC9, C8 and CCJ1 bag dust are approaching, the bag dust of material feeding system can be added to the pulverized coal for blast furnace injection production. From the results of industrial tests, the addition of 5% material feeding system bag dust will not have great impact on the blast furnace injection coal particle size, bag dust composition, blast furnace conditions and fuel consumption. It can replace the CDQ dust and make up the blast furnace blown resource gap of bag dust.
王刚, 徐坤, 王广伟, 吴耀春. 高炉喷吹煤配加供料系统除尘灰可行性分析[J]. 中国冶金, 2022, 32(11): 88-96.
WANG Gang, XU Kun, WANG Guang-wei, WU Yao-chun. Feasibility analysis on adding bag dust of material feeding system to coal injected into blast furnace[J]. China Metallurgy, 2022, 32(11): 88-96.
World Steel Association press release. December 2021 and full year global crude steel production[EB/OL].(2022-01-25)[2022-05-09].https://worldsteel.org/zh-hans/media-centre/press-releases/2022/december-2021-crude-steel-production-and-2021-global-totals/.
Leimalm U, Lundgren M, Ökvist L S, et al. Off-gas dust in an experimental blast furnace part 1: Characterization of flue dust, sludge and shaft fines[J]. ISIJ International, 2010, 50(11): 1560.
Trinkel V, Mallow O, Aschenbrenner P, et al. Characterization of blast furnace sludge with respect to heavy metal distribution[J]. Industrial and Engineering Chemistry Research, 2016, 55(19): 5590.
[8]
El-Hussiny N A, Shalabi M E H. Effect of recycling blast furnace flue dust as pellets on the sintering performance[J]. Science of Sintering, 2010, 42(3): 269.
WANG Guang-wei, ZHANG Jian-liang, SHAO Jiu-gang, et al. Characterisation and model fitting kinetic analysis of coal/biomass co-combustion[J]. Thermochica ACTA, 2014, 591:68.
[17]
ZHANG Jian-liang, WANG Guang-wei, SHAO Jiu-gang, et al. Pulverized coal combustion of nitrogen free blast furnace[J]. Journal of Iron and Steel Research International,2013, 20(3): 1.
[18]
WANG Guang-wei,ZHANG Jian-liang,HOU Xin-mei,et al. Study on CO2 gasification properties and kinetics of biomass chars and anthracite char[J]. Bioresource Technology, 2015, 177:66.
[19]
贺新卜,张建良,郭豪. 高炉喷吹煤冶金性能评价方法[J]. 钢铁研究,2008(5):1.
[20]
He C, Giannis A, Wang J Y. Conversion of sewage sludge to clean solid fuel using hydrothermal carbonization: hydrochar fuel characteristics and combustion behavior[J]. Applied Energy, 2013, 111: 257.