Brief introduction of process design for a 350 t converter steelmaking plant
WANG Qing- guo1,2,GUO Lei3,WANG Quan3
（1. Investment Management Department, Baoshan Iron and Steel Co.， Ltd., Shanghai 201900, China 2. Engineering Headquarters, Baosteel Zhanjiang Iron and Steel Co., Ltd., Zhanjiang 524043, Guangdong, China 3. Steelmaking Department, Baosteel Engineering and Technology Group Co.， Ltd., Shanghai 201900, China）
Abstract：The main process route and the process layout based on the route for a 350 t converter steelmaking plant in Baosteel Zhanjiang Iron and Steel Co., Ltd. were briefly introduced, including the process route, the allocation of the basic facilities, the main process and the plane layout of the steelmaking workshop. And the characteristics of the layout were summarized through the analysis. In addition, the process parameters of the major equipment were briefly illustrated, such as the inner shape size of the converter, the design and parameters of the top and bottom blowing control systems. Combined with the production operation conditions, an appropriate evaluation of the process design for the steelmaking workshop was made.
汪庆国 郭雷，王权. 350 t转炉炼钢车间工艺设计简介[J]. 中国冶金, 2017, 27(9): 58-66.
WANG Qing- guo,,GUO Lei,WANG Quan. Brief introduction of process design for a 350 t converter steelmaking plant. China Metallurgy, 2017, 27(9): 58-66.
2017, Vol. 27 
