烧结混合料配加酸性精粉的试验研究
王维科,杨福州
邯郸钢铁集团公司炼铁部,河北 邯郸 056015
Test Study on Adding Acidic Fine Ore Into Sinter Mix in Hangang
WANG Weike,YANG Fuzhou
Ironmaking Department, Handan Iron and Steel Group Co. Handan 056015,Hebei,China
摘要 通过配加酸性精粉的工业试验,研究了其对烧结矿强度及化学成分的影响,并探讨了配加酸性精粉制备高炉冶炼所需烧结矿的可行性。
关键词 :
酸性精矿粉 ,
烧结矿 ,
强度 ,
品位
Abstract :The industrial tests of adding acidic fine ore into sinter mix were described in order to find its influence on thermal strength and chemical compositions of sinter.The feasibility of adding acidic fine ore to produce sinter for BF feeding was also investgated.
Key words :
acidic fine ore
sinter
strength
quality
收稿日期: 1900-01-01
[1]
贵永亮 刘连继 肖洪 胡宾生 李晓云. 固体燃料种类和配比对烧结矿质量的影响 [J]. , 2014, 24(5): 5-8.
[2]
马立 董文卜. 热处理工艺对12%Cr铁素体不锈钢组织性能的影响 [J]. , 2014, 24(5): 25-29.
[3]
彭兆丰,吝章国,谷凤龙,何方,李守斌. 邯钢600MPa级冷轧双相钢的连退工艺 [J]. , 2014, 24(4): 31-35.
[4]
蒋大军,宋剑,何木光,杜斯宏. 钒钛磁铁矿烧结降低返矿率技术研究与实践 [J]. , 2014, 24(4): 39-44.
[5]
刘成宝,许宝玉,蔡晓辉. 低冷却速度下700MPa级V,Ti微合金化高强钢组织和性能 [J]. , 2014, 24(2): 19-22.
[6]
邹雷雷 ,吕庆,刘东辉,陈树军,李凤臣,白瑞国. 混合矿基础特性对钒钛烧结矿RDI的影响 [J]. , 2014, 24(10): 11-15.
[7]
倪善强 赵治千 储少军. 摇包熔池混匀时间的水模型 [J]. , 2014, 25(07): 22-26.
[8]
何木光. 控制钒钛磁铁烧结矿FeO含量的方法 [J]. , 2014, 25(07): 32-35.
[9]
刘海波. TMCP工艺在低合金钢生产中的应用 [J]. Journal of Materials Sciences & Technology, 2013, 23(9): 22-25.
[10]
王俊山, 周明顺, 翟立委, 刘杰, 张辉. 鞍钢烧结配加巴西南部粉矿实验研究 [J]. Journal of Materials Sciences & Technology, 2013, 23(5): 26-29.
[11]
孙恺, 李福民, 陈 伟, 伊凤永, 吕庆. 巴西矿和澳矿的烧结性能试验 [J]. Journal of Materials Sciences & Technology, 2013, 23(5): 22-25.
[12]
何木光, 肖 均, 郭 刚, 宋 剑. 大富矿配比高碱度钒钛矿烧结制度研究 [J]. Journal of Materials Sciences & Technology, 2013, 23(2): 21-25.
[13]
孙艳芹 , 王瑞哲, 吕 庆, 刘 然. TiO 2 质量分数对中钛型烧结矿质量影响的研究 [J]. Journal of Materials Sciences & Technology, 2013, 23(10): 6-9.
[14]
高雅巍, 李京社, 刘成松, 唐海燕. 不同类型铁矿石的低温还原粉化特征 [J]. Journal of Materials Sciences & Technology, 2013, 23(10): 1-5.
[15]
尹雨群, 雷玄威, 吴开明. 超高强度管线钢的开发现状与趋势 [J]. Journal of Materials Sciences & Technology, 2012, 22(9): 5-9.