参数趋势线在烧结机上的应用
胡洪天
攀枝花钢铁股份有限公司炼铁厂,四川 攀枝花 617022
Application of Parameter Trend Line Operating in Sintering Machine
HU Hongtian
Ironmaking Plant ,Panzhihua Iron and Steel Company Ltd. ,Panzhihua 617022, Sichuan,China
摘要 用1台计算机反映料层、机速、烧结过程的拐点温度、保温段温度、点火器前温度等烧结过程变化的主要参数,显示其1 h内的实时参数趋势线画面,可使看火工的操作有据可依,且能实行机速“早动、少动、微动”的操作思路,更加准确地调整机速和料层。
关键词 :
烧结机 ,
操作 ,
参数 ,
趋势线
Abstract :A computer was used to show the main parameters (including:bed depth,sintering machine speed,sintering process inflexion temperat process ure,holding zone temperature,temperature in front of igniter and so on) and to express the change of real time trend line in one hour. It can help the operator having warranty to be consulted ,adjust sinter machine speed and material layer accurately.
Key words :
sintering machine
operation
parameter
trend line
收稿日期: 1900-01-01
[1]
张广杰,张飞. 无钙处理条件下轴承钢钢水可浇性技术的研究与应用 [J]. , 2014, 24(5): 40-44.
[2]
周民,陈莹卷,闵建军,马靳江,牛强. 高速线材减定径多道次孔型轧制有限元分析及工艺参数优化 [J]. , 2014, 24(3): 4-8.
[3]
王林,于洋,王畅,陈瑾,徐海卫,焦会立. 边部组织及切边工艺对低碳SPHC冷轧边裂的影响 [J]. , 2014, 24(09): 15-21.
[4]
王志堂 刘卯. 马钢2500m3高炉原燃料劣化条件下降低焦比的生产实践 [J]. , 2014, 25(07): 48-54.
[5]
李夯为, 唐顺兵. 大型高炉操作炉型合理性的特点及调整 [J]. Journal of Materials Sciences & Technology, 2013, 23(8): 26-29.
[6]
梁利生, 陈永明, 魏 国, 沈峰满. 宝钢3号高炉长寿设计与操作维护实践 [J]. Journal of Materials Sciences & Technology, 2013, 23(6): 14-20.
[7]
程 林, 庞炜光, 彭开玉, 刘道正, 石伟强, 彭晓会. RH真空系统故障分析处理方法的研究和应用 [J]. Journal of Materials Sciences & Technology, 2013, 23(4): 31-34.
[8]
谢建军,韩秀丽,鲍彦丽,高永会,冯帅. MnO2 对高炉喷吹煤粉助燃机制的研究 [J]. Journal of Materials Sciences & Technology, 2013, 23(11): 16-20.
[9]
刘志朝,陈奎,王磊. 高炉炉腹煤气量指数和透气阻力系数的研究与应用 [J]. Journal of Materials Sciences & Technology, 2013, 23(11): 32-37.
[10]
杨文远,吕英华,胡砚斌,王明林,刘路长,侯春. 氧射流对熔池穿透深度的研究 [J]. Journal of Materials Sciences & Technology, 2013, 23(11): 21-26.
[11]
李红卫, 唐顺兵. 大型高炉实现高煤比高产量生产的条件和措施 [J]. Journal of Materials Sciences & Technology, 2013, 23(10): 26-31.
[12]
朱仁良, 王天球, 王训富. 高炉优化操作与低碳生产 [J]. Journal of Materials Sciences & Technology, 2013, 23(1): 30-35.
[13]
何木光, 肖 均, 杜斯宏, 李 程. 提高攀钢钒360 m 2 烧结机产质量的实践 [J]. Journal of Materials Sciences & Technology, 2012, 22(8): 30-35.
[14]
邱国兴, 郭新超, 初云祥, 王子金. 莱钢3 200 m3 高炉提高喷煤量降低焦比实践 [J]. Journal of Materials Sciences & Technology, 2012, 22(6): 32-35.
[15]
唐顺兵, 闫魁红. 大型高炉提高利用系数的措施 [J]. Journal of Materials Sciences & Technology, 2012, 22(5): 29-33.