350 m3高炉热风炉的技术进步
许思东
济南钢铁股份有限公司技术中心,山东 济南 250101
Technical Progress On Hot Stove of 350 m3 Blst Furnace
Xu Si-dong
Technical Center of Jinan Iron and Steel Co.Ltd,jinan 250101,Shandong,China
摘要 介绍了济钢第一炼铁厂自1980年以来热风炉的技术进步情况;尤其是在1995年后,该厂围绕提高风温水平对热风炉结构进行了改进,采用了无机换热、膜法富氧、前置热风炉等先进实用的新技术,有力地促进了风温水平和炼铁综合技术指标的提高;同时,提出了今后改进热风炉及提高风温的几点建议。
关键词 :
热风炉 ,
风温 ,
膜法富氧 ,
技术进步
Abstract :The technology development practice on hot stove of No.1 Iron Making Plant since 1980 is introduced, especially from 1995. The stove structure for raising stove temperature has been improved. Through some advanced and actual technologies,for example, inorganic heat exchange technology ,oxygen enriched by film filter, front set hot stove, etc., the stove temperature is increased and the comprehensive indexes of iron making is improved. Some proposals for improving the hot stove and increasing stove temperature in future are presented.
Key words :
hot stove
blast temperature
film enriching oxygen
technology development.
收稿日期: 1900-01-01
[1]
刘红军, 宇永香, 齐凤升. 顶燃蓄热式热风炉底部空间空气流动特性模拟研究 [J]. Journal of Materials Sciences & Technology, 2013, 23(9): 13-16.
[2]
陈秀娟, 吴启常, 张建梁, 王永涛. 高风温热风炉热点问题讨论 [J]. Journal of Materials Sciences & Technology, 2013, 23(9): 7-12.
[3]
张福明. 高风温低燃料比高炉冶炼工艺技术的发展前景 [J]. Journal of Materials Sciences & Technology, 2013, 23(2): 1-7.
[4]
张福明, 梅丛华, 银光宇, 毛庆武, 钱世崇, 胡祖瑞. 首钢京唐5500m3 高炉BSK顶燃式热风炉设计研究 [J]. Journal of Materials Sciences & Technology, 2012, 22(3): 27-32.
[5]
赵民革. 以科技进步为基础、创新求发展——近几年铁矿粉造块技术发展综述 [J]. Journal of Materials Sciences & Technology, 2011, 21(9): 4-13.
[6]
陈冠军. 首钢高炉热风炉高风温技术进步 [J]. Journal of Materials Sciences & Technology, 2009, 19(9): 18-18.
[7]
刘振林. 济钢近几年铁前系统技术进步 [J]. Journal of Materials Sciences & Technology, 2009, 19(8): 15-15.
[8]
苏秀梅. ZSD顶燃式热风炉烧嘴改造的模拟研究与应用 [J]. Journal of Materials Sciences & Technology, 2009, 19(6): 15-15.
[9]
王加林. 高炉正常生产对球式热风炉拱顶的修复 [J]. Journal of Materials Sciences & Technology, 2009, 19(3): 32-32.
[10]
王明磊1 ,侯金红2 ,杨士岭3 ,徐京义3. 新型顶燃式热风炉技术的开发与应用 [J]. Journal of Materials Sciences & Technology, 2008, 18(2): 51-51.
[11]
梁铁1 ,甘贵平2. 柳钢“十五”期间轧制技术的进步与建议 [J]. Journal of Materials Sciences & Technology, 2007, 17(1): 57-57.
[12]
潘志生. 梅山2号高炉内燃式热风炉获高风温的生产实践 [J]. Journal of Materials Sciences & Technology, 2006, 16(8): 1-1.