Analysis for effect of hot stamping process parameters on part formability
MA Wen-yu1,2, YANG Jian-wei1,2, YAO Ye1,2, ZHANG Yong-qiang1,2
1. Research Institute of Technology, Shougang Group Co., Ltd., Beijing 100043, China; 2. Beijing Key Laboratory of Green Recyclable Process for Iron and Steel Production Technology, Beijing 100043, China
Abstract:Effects of hot stamping process parameters on the part formability were researched. Hot stamping process parameters mainly included the stamping speed, blank holder force, friction coefficient and blank temperature. Each parameter was divided into three levels, namely low, medium and high. Combined with the test plan design and simulation model, the influence degree of different process parameters on the formability of parts was studied by variance analysis. At the same time, the quantitative analysis method was used to determine the quantitative influence value of process parameters with different levels on the formability of parts. The results showed that the declining order of the process parameters influence on the thinning rate was the friction coefficient, blank temperature, stamping speed and blank holder force. Among them, the quantitative influence value of the friction coefficient was about 97.3%.
马闻宇, 杨建炜, 姚野, 张永强. 热冲压工艺参数对零件成形性影响规律分析[J]. 中国冶金, 2021, 31(11): 29-33.
MA Wen-yu, YANG Jian-wei, YAO Ye, ZHANG Yong-qiang. Analysis for effect of hot stamping process parameters on part formability[J]. China Metallurgy, 2021, 31(11): 29-33.
LI H,HE L,ZHAO G,et al. Constitutive relationships of hot stamping boron steel B1500HS based on the modified Arrhenius and Johnson-Cook model[J]. Materials science and engineering A,Structural materials(Properties,Microstructure and Processing),2013,580:330.
SHI D,HU P,YING L. Comparative study of ductile fracture prediction of 22MnB5 steel in hot stamping process[J]. The International Journal of Advanced Manufacturing Technology,2015,84(8):895.
Li N,Lin J,Balint D S,et al. Modelling of austenite formation during heating in boron steel hot stamping processes[J]. Journal of materials processing technology,2016,237:394.
[12]
LI N,SUN C,GUO N,et al. Experimental investigation of boron steel at hot stamping conditions[J]. Journal of Materials Processing Technology,2016,228:2.
[13]
ZHOU J,WANG B,HUANG M. Two constitutive descriptions of boron steel 22MnB5 at high temperature[J]. Materials and Design,2014,63:738.
[14]
Ganapathy M,Li N,Lin J,et al. Experimental investigation of a new low-temperature hot stamping process for boron steels[J]. International journal of advanced manufacturing technology,2019,105:669.
[15]
YANG S,WANG L. Study on selective cooling of ultra high strength steel car body in hot forming[J]. The International Journal of Advanced Manufacturing Technology,2018,97:1583.
[16]
FANG H,WANG G,LIU S,et al. Research on resistance heating behavior of high-strength steel and its hot-stamping forming[J]. Journal of Materials Engineering and Performance,2018,27(9):4829.
[17]
MA W,WANG B,FU L,et al. Influence of process parameters on deep drawing of AA6111 aluminum alloy at elevated temperatures[J]. Journal of Central South University,2015,22(4):1167.