齿轮钢中氮含量控制与研究
朱波
莱芜钢铁集团股份公司炼钢厂,山东 莱芜 271126
Gear Nitrogen content in steel Analysis and Control
ZHU Bo
Steel Works of Laiwu Iron and Steel Co., Ltd., Laiwu 271126, Shandong, China
摘要 本文研究了齿轮钢生产过程中氮含量的变化,通过在不同工序取样分析,找出了增氮的主要工序,对这些工序深入研究并加以改进,降低了齿轮钢中的氮含量。研究发现,转炉放钢过程、LF精炼、连铸浇注过程增氮显著;通过采取优化转炉出钢口的尺寸和形状、精炼降低通电时间增大渣量埋弧操作、钢包中间包水口双重保护浇注。在无脱气设备的情况下,可将齿轮钢在整个生产过程中的增氮量比原来降低30%以上,达到国内领先水平。通过整个生产系统的工艺优化和改进,使齿轮钢中的氮含量控制在40×10-6 以下。
关键词 :
齿轮钢 ,
泡沫渣 ,
保护浇注 ,
吸氮量
Abstract :To solve the nitrogen content is too high gear steel quality defects caused by the production process in gear steel sampling of the different processes, the variation of nitrogen content, while the main process of nitrogen for growth to take to optimize tapping hole size converterand shape, adjust the refining process, continuous casting control measures such as argon closure, in the absence of degassing equipment case, the nitrogen content in steel gear control 40×10-6 below, improved product quality.
Key words :
gear steel
slag foaming
protection casting
the absorption of nitrogen
收稿日期: 2010-09-02
出版日期: 2011-11-15
通讯作者:
吕长海
E-mail: sunlily_2008@163.com
﹝1﹞ 傅 杰,陈恩普编著.特种冶金﹝M﹞.北京:冶金工业出版社,1982.62.
﹝2﹞ 黄西鈷编著.钢铁冶金原理﹝M﹞.北京:冶金工业出版社,1990.
﹝3﹞吴宗双,龚志翔等.车轮钢冶炼过程氮含量的变化规律及工艺改进﹝J﹞.连铸,2007,4(8).
﹝4﹞蔡开科,程士富.连续铸钢原理与工艺﹝M﹞.北京:冶金工业出版社,2002.
﹝5﹞黄小东,戴逸.中间包覆盖渣中B2O3和Al2O3对钢液氮含量的影响﹝J﹞.连铸,2007,3(34).
[1]
黄涛,宋满堂,梁启华,龚伟. 基于非线性方程法的齿轮钢淬透性计算模型 [J]. , 2014, 24(3): 14-17.
[2]
王华 赵张发 兰鹏 宋丽娜. 18CrMnB齿轮钢棒材中硬质点相成因探究 [J]. , 2014, 24(09): 10-14.
[3]
赵艳玲,王淑满,王洪兴,常立山. X80管线钢的生产实践 [J]. , 2014, 24(08): 26-29.
[4]
刘志国, 王洪兴. 连铸保护浇注工艺改进 [J]. Journal of Materials Sciences & Technology, 2013, 23(8): 38-41.
[5]
谢海平, 杨庆敏, 刘骅震, 乔兵. 窄淬透性齿轮钢20CrMnTiH5工艺研究 [J]. Journal of Materials Sciences & Technology, 2013, 23(7): 24-27.
[6]
黄建军, 张新文, 周 伟, 杜志明. 37Mn-1铸坯表面气孔缺陷分析与研究 [J]. Journal of Materials Sciences & Technology, 2012, 22(2): 19-24.
[7]
鞠艳美, 张 伟, 李法兴. 油井管用非调质钢36Mn2V冶金质量控制技术 [J]. Journal of Materials Sciences & Technology, 2012, 22(12): 17-20.
[8]
杨之俊, 杨海滨,王彦杰. 氮在炼钢及连铸过程中的变化及影响因素分析 [J]. Journal of Materials Sciences & Technology, 2011, 21(4): 12-16.
[9]
何庆文. 20CrMnTiH齿轮钢中氧含量控制 [J]. Journal of Materials Sciences & Technology, 2009, 19(9): 28-28.