AOD设备及工艺设计特点
吴燕萍
中冶赛迪工程技术股份有限公司炼钢室,重庆 400013
Device and Technology Design Features of AOD
WU Yanping
Department of SteelMaking, CISDI Engineering Co Ltd.,Chongqing 400013,Sichuan, China
摘要 简要分析了AOD的工作原理、工艺操作过程;并结合AOD工艺操作特点,总结了AOD炉体设备、供配气系统、铁合金及副原料加料系统、烟气净化系统等相关设施的设备设计特点以及工艺设计特点。
关键词 :
AOD ,
设备 ,
工艺操作 ,
工艺设计
Abstract :The principle and operating procedure of AOD were lntroduced, and then the device and technology design features of the AOD convertor system, supply and distribution system, alloy charging system, the dedusting system combined with the stainless steel technological process were summarized.
Key words :
AOD
device
technology operating
technology design
收稿日期: 1900-01-01
[1]
芦永明,田乃媛,贺东风,王丽娜,陈宏志. 全板带型钢厂高炉—转炉区段配置及其生产组织探讨 [J]. , 2014, 24(4): 45-50.
[2]
王兴华,韩甲兴,肖湖福. 热轧厂层流冷却设备的布局及计算 [J]. , 2014, 24(08): 51-54.
[3]
BURGMANN Wilhelm,GUSTAFSON Thore,DAVEN Jen. 钢水脱气用真空泵系统的选择 [J]. , 2014, 24(08): 55-61.
[4]
刘精宇 蔡九菊,李小玲,董金玲 郑莹. 钢铁联合企业的发电设备及影响发电效率的因素分析 [J]. , 2014, 24(06): 58-64.
[5]
曹伟, 龙明华, 高征铠. 水钢4号高炉开炉装料实践 [J]. Journal of Materials Sciences & Technology, 2013, 23(5): 30-33.
[6]
蒋 裕, 杭桂生, 李学军, 程旺生, 朱 几. 马钢1号2 500 m3 高炉应用化学技术延长冷却设备寿命的实践 [J]. Journal of Materials Sciences & Technology, 2012, 22(6): 36-39.
[7]
李文武. 2×500m2烧结机的设计特点及生产实践 [J]. Journal of Materials Sciences & Technology, 2012, 22(4): 30-34.
[8]
王子金, 亓玉敏. 莱钢炼铁厂“600”创新管理实践 [J]. Journal of Materials Sciences & Technology, 2011, 21(9): 36-38.
[9]
苗英杰,马 驰,屈春花. 舞钢中厚板热处理生产概况 [J]. Journal of Materials Sciences & Technology, 2011, 21(2): 1-4.
[10]
吴燕萍,凌国胜. RH快速精炼工艺与设备选型 [J]. Journal of Materials Sciences & Technology, 2011, 21(2): 11-14.
[11]
栗春,胡贤磊,王丙兴,王君,吴迪. 中厚板冷却集管供水装置关键参数的研究 [J]. Journal of Materials Sciences & Technology, 2009, 19(4): 38-38.
[12]
高伟,韩顺杰,陈庆. 蓄热烧嘴式烘烤装置在AOD炉中的研制与应用 [J]. Journal of Materials Sciences & Technology, 2009, 19(3): 34-34.
[13]
李春梅,张爱民,蒋善玉. 锅炉用耐热钢板的开发与生产 [J]. Journal of Materials Sciences & Technology, 2008, 18(3): 8-8.
[14]
杨俊锋. 板坯连铸机高连拉炉数的生产实践 [J]. Journal of Materials Sciences & Technology, 2007, 17(9): 9-9.
[15]
刘树清 . 薄板坯连铸机常见故障分析 [J]. Journal of Materials Sciences & Technology, 2007, 17(8): 59-59.