连铸坯皮下气泡缺陷成因及控制

doi:10.13228/j.boyuan.issn1006-9356.20200234

摘要
图/表
参考文献
相关文章 (15)

全文: PDF (2937 KB) HTML (0 KB)
输出: BibTeX | EndNote (RIS)

摘要皮下气泡是连铸坯常见的质量缺陷,严重影响钢材的质量及使用性能。通过对国内部分钢厂生产的连铸坯皮下气泡的缺陷情况进行总结分析,发现一氧化碳气泡缺陷和氩气泡缺陷占很大比例。其次,总结概述了连铸坯皮下气泡缺陷的分布特点,气泡被捕获的机理以及不同类型气泡缺陷的形成原因,发现脱氧不良、水口吹氩工艺、电磁搅拌以及过热度等均会对皮下气泡缺陷造成影响。为降低铸坯皮下气泡缺陷产生的不良影响,提出了控制连铸坯皮下气泡缺陷的有效措施,以期为实际生产提供参考。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	作者相关文章
	王田田
	杨树峰
	李京社
	郭皓
	袁航
	张福君

关键词 ：连铸坯, 皮下气泡, 脱氧, 水口吹氩, 电磁搅拌

Abstract：Subcutaneous bubbles are common quality defects of continuous casting billets, which seriously affect the quality and performance of steel. The situation of subcutaneous bubble defects in continuous casting billets of some domestic steel mills was summarized and analyzed. And it was found that the defects of carbon monoxide bubbles and argon bubbles accounted for a large proportion. Then the distribution characteristics of subcutaneous bubble defects in continuous casting billets, the mechanism of trapped bubbles, and the causes of the formation of different types of bubble defects were summarized. It was found that incomplete deoxygenation, nozzle argon blowing process, electromagnetic stirring and degree of superheat, etc., could affect the subcutaneous bubbles defects. In order to reduce the adverse effects caused by the subcutaneous bubbles defects in continuous casting billets, the effective measures to control the defects were put forward, which could provide a reference for actual production.

Key words： continuous casting billet subcutaneous bubble deoxygenation argon blowing electromagnetic stirring

收稿日期: 2020-04-29

基金资助:国家自然科学基金资助项目(51822401,51674023); 中央高校基本科研业务费专项资金资助项目(FRF-TP-18-009C1)

通讯作者: 杨树峰(1981—), 男, 博士, 教授; E-mail: yangshufeng@ustb.edu.cn

作者简介: 王田田(1993—), 女, 博士生; E-mail: wangtiantian@xs.ustb.edu.cn

引用本文:

王田田, 杨树峰, 李京社, 郭皓, 袁航, 张福君. 连铸坯皮下气泡缺陷成因及控制[J]. 中国冶金, 2020, 30(12): 35-43. WANG Tian-tian, YANG Shu-feng, LI Jing-she, GUO Hao, YUAN Hang, ZHANG Fu-jun. Causes and control of subcutaneous bubble defects in continuous casting billets[J]. China Metallurgy, 2020, 30(12): 35-43.

链接本文:

http://www.zgyj.ac.cn/CN/10.13228/j.boyuan.issn1006-9356.20200234 或 http://www.zgyj.ac.cn/CN/Y2020/V30/I12/35

[1]	Zhang L, Aoki J, Thomas B G. Inclusion removal by bubble flotation in a continuous casting mold[J]. Metallurgical and Materials Transactions:B, 2006, 37(3): 361.
[2]	张立峰,王新华.连铸钢中的夹杂物[J].山东冶金,2005,27(2):1.
[3]	Tripathy P K, Das S, Jha M K, et al. Migration of slab defects during hot rolling[J]. Ironmaking and Steelmaking, 2006, 33(6): 477.
[4]	张华,倪红卫.中厚板边裂的形成与控制[J].武汉科技大学学报:自然科学版,2006,29(3):217.
[5]	Damen W, Abbel G, De Gendt G. Argon bubbles in slabs, a non-homogeneous distribution[J]. Revue de Métallurgie, 1997, 94(6): 745.
[6]	Esaka H, Kuroda Y, Shinozuka K, et al. Interaction between argon gas bubbles and solidified shell[J]. ISIJ International, 2004, 44(4): 682.
[7]	温维新,胡勤东,陈常义,等.含硼钢皮下气泡成因及对策[J].连铸,2019(2):30.
[8]	周楠,张志明,刘春林,等.1215MS易切削钢铸坯皮下气泡原因分析及改进[J].连铸,2017(4):48.
[9]	邱涛.H08A焊条钢工艺及质量控制[J].中国冶金,2018,28(11):45.
[10]	王克锋,宋介中,李明贤,等.SS400热轧H型钢翼缘开裂成因及控制措施[J].钢铁,2011,46(9):96.
[11]	陈传磊,张立标,杨晓清,等.船板钢表面小纵裂纹成因分析及控制[J].山东冶金,2010,32(5):43.
[12]	杨怀春,马进国,孙利斌.H08A铸坯气泡的原因分析及控制[J].新疆钢铁,2013 (1):33.
[13]	金赵敏,贾国军,张小平.SWRM6鱼鳞状缺陷成因分析[J].浙江冶金,2004(1):18.
[14]	段双霞,孙建林,富平原,等.Q235B中厚板表面气泡缺陷形成机理研究[J].物理测试,2008,26(1):14.
[15]	罗高强,唐萍,文光华,等.梅山2号板坯连铸低碳钢铸坯质量研究[J].钢铁,2007,42(8):39.
[16]	陈伟,苏鹤洲,李金柱.昆钢热轧板孔洞缺陷成因浅析[J].连铸,2008(5):45.
[17]	王智轶,王朝阳,贺建哲,等.Q345B钢板表面小纵裂纹的成因分析[J].炼钢,2013,29(1):69.
[18]	王新华.高品质冷轧薄板钢中非金属夹杂物控制技术[J].钢铁,2013,48(9):1.
[19]	罗辉.含氮双相不锈钢连铸坯皮下气孔研究[J].世界钢铁,2014(4):17.
[20]	魏国立.氮含量对皮下气泡形成的影响及控制措施[J].酒钢科技,2012(3):94.
[21]	连妙芳,陆文,赵裕健.Q235B中厚板皮下气泡产生原因及控制措施探究[J].宽厚板,2016,22(1):27.
[22]	李向龙,李宝宽,刘中秋,等.厚板坯气泡形貌、分布及携带夹杂物的原位分析[J].工程科学学报,2018,40(增刊1):183.
[23]	刘丙岗,文光华,唐萍,等.IF钢铸坯皮下小气泡分布[J].北京科技大学学报,2013,35(12):1595.
[24]	耿明山,王新华,张炯明,等.连铸坯表面气孔缺陷研究[J].钢铁,2010,45(1):46.
[25]	Thomas B G, Denissov A, Bai H. Behavior of argon bubbles during continuous casting of steel[C]//Steelmaking Conference Proceedings. Chicago: Iron And Steel Society of AIME, 1997: 375.
[26]	金小礼,雷作胜,于湛,等.Ar气泡在连铸坯固/液界面处运动行为的物理模拟研究[J].金属学报,2011,47(6):763.
[27]	Jin K, Thomas B G, Ruan X. Modeling and measurements of multiphase flow and bubble entrapment in steel continuous casting[J]. Metallurgical and Materials Transactions:B, 2015, 47(1):1.
[28]	Thomas B G, Yuan Q, Mahmood S, et al. Transport and entrapment of particles in steel continuous casting[J]. Metallurgical and Materials Transactions:B, 2014,45(1): 22.
[29]	肖寄光,王福明.连铸坯中气泡产生原因分析及判断方法[J].宽厚板,2006,12(2):32.
[30]	Abbel G, Damen W, De Gendt G, et al. Argon bubbles in slabs[J]. ISIJ International, 1996, 36(l): 219.
[31]	李积鹏,马杰,张有余.HP295焊瓶钢铸坯皮下气泡的成因分析及防止措施[J].中国冶金,2006,16(10):20.
[32]	Miki Y, Takeuchi S. Bubble entrapment on solidified shell caused by unsteady steel flow in mold[J]. Steel Research International, 2003, 74(2): 114.
[33]	周勇,申鹏,刘家阔,等.2507双相不锈钢连铸坯表面气孔缺陷[J].钢铁,2013,48(12):41.
[34]	胡铁军,韩春良,翁玉娟,等.大规格钢筋铸坯表面质量研究[C]//2012年炼钢-连铸高品质洁净钢生产技术交流会论文集.本溪:中国金属学会,2012: 208.
[35]	橋浦正史,森一美,刘良春.铁碳合金钢锭凝固时CO宏观气泡的生成[J].武钢技术,1990(12):29.
[36]	蔡开科.转炉-精炼-连铸过程钢中氧的控制[J].钢铁,2004,39(8):49.
[37]	幸伟,倪红卫,张华,等.钢液脱氧工艺的发展状况分析[J].过程工程学报,2009,9(增刊1):443.
[38]	胡招凡,张炯明,蔡珍,等.结晶器电磁搅拌对IF钢连铸坯表层纯净度的影响[J].钢铁研究学报,2011,23(10):15.
[39]	雷少武,张炯明,董其鹏,等.EMS对板坯表层气泡分布的影响研究[J].炼钢,2015,31(2):64.
[40]	王谦,谢兵,迟景灏,等.保护渣对含硫易切钢连铸坯表面质量的影响[J].钢铁,2004,39(11):23.
[41]	Ávila-Ortiz Y, Morales R M D, Cedillo-Hernández V, et al. Mathematical modeling of argon bubbling effects on fluid flow patterns of liquid steel in a slab mold[J]. Steel Research International, 2018, 89(5): 1700453.
[42]	Singh V, Dash S K, Sunitha J S, et al. Experimental simulation and mathematical modeling of air bubble movement in slab caster mold[J]. ISIJ International, 2006, 46(2): 210.
[43]	郭永民,李龙.中厚板表面爪型裂纹成因分析[J].天津冶金,2013 (增刊1):47.
[44]	Miyake T, Morishita M, Nakata H, et al. Influence of sulphur content and molten steel flow on entrapment of bubbles to solid/liquid interface[J]. ISIJ International, 2006, 46(12): 1817.
[45]	DENG X, JI C, ZHU G, et al. Quantitative evaluations of surface cleanliness in IF steel slabs at unsteady casting[J]. Metallurgical and Materials Transactions:B, 2019, 50(4): 1974.
[46]	邵大庆,王子然.连铸方坯气泡缺陷的分析与预防[J].河北冶金,2007 (6):40.
[47]	Morales R D, Tang Y, Nitzl G, et al. Design of a submerged entry nozzle for thin slab molds operating at high casting speeds[J]. ISIJ International, 2012, 52(9): 1607.
[48]	Calderón-Ramos I, Morales R D. The role of submerged entry nozzle port shape on fluid flow turbulence in a slab mold[J]. Metallurgical and Materials Transactions:B, 2015, 46(3): 1314.
[49]	Cho S M, Thomas B G, Kim S H. Bubble behavior and size distributions in stopper-rod nozzle and mold during continuous casting of steel slabs[J]. ISIJ International, 2018, 58(8): 1443.
[50]	Liu R, Thomas B G, Sengupta J, et al. Measurements of molten steel surface velocity and effect of stopper-rod movement on transient multiphase fluid flow in continuous casting[J]. ISIJ International, 2014, 54(10): 2314.
[51]	Yang H, Vanka S P, Thomas B G. Modeling argon gas behavior in continuous casting of steel[J]. JOM, 2018, 70(10): 2148.
[52]	DENG X, JI C, CUI Y, et al. Flow pattern control in continuous slab casting moulds: physical modelling and plant trials[J]. Ironmaking and Steelmaking, 2017, 44(6): 461.
[53]	卢海彪,程常桂,李阳,等.结晶器内氩气泡分布及钢渣界面波动行为[J].钢铁,2018,53(4):27.
[54]	Sanchezperez R, Morales R D, Diazcruz M, et al. A physical model for the two-phase flow in a continuous casting mold[J]. ISIJ International, 2003, 43(5): 637.
[55]	Bai H, Thomas B G. Turbulent flow of liquid steel and argon bubbles in slide-gate tundish nozzles: Part II. Effect of operation conditions and nozzle design[J]. Metallurgical and Materials Transactions:B, 2001, 32(2): 269.
[56]	陈登福,张献光,张立峰,等.板坯连铸结晶器内氩气泡行为的模拟研究[J].钢铁,2010,45(4):20.
[57]	Ramos I C, Morales R D, Garcia-Hernandez S, et al. Effects of immersion depth on flow turbulence of liquid steel in a slab mold using a nozzle with upward angle rectangular ports[J]. ISIJ International, 2014, 54(8): 1797.
[58]	邓小旋,熊霄,王新华,等.水口底部形状对高拉速板坯连铸结晶器液面特征的影响[J]. 北京科技大学学报,2014,36(4):515.
[59]	熊霄,邓小旋,王新华,等.水口出口形状对高拉速板坯连铸结晶器内流场特征的影响[J].钢铁研究学报,2014,26(7):35.
[60]	Cho S M, Thomas B G, Kim S H. Effect of nozzle port angle on transient flow and surface slag behavior during continuous steel-slab casting[J]. Metallurgical and Materials Transactions:B, 2019, 50(1): 52.
[61]	程常桂,张金磊,陈赢,等.吹氩结晶器内钢渣界面氩气泡行为研究[J].铸造技术,2019,40(10):1034.
[62]	Jin K, Vanka S P, Thomas B G. Large Eddy simulations of electromagnetic braking effects on argon bubble transport and capture in a steel continuous casting mold[J]. Metallurgical and Materials Transactions:B, 2018, 49(3): 1360.
[63]	Ridolfi M R, Tassa O. Formation of nitrogen bubbles during the solidification of 16-18% Cr high nitrogen austenitic stainless steels[J]. Intermetallics, 2003, 11(11/12): 133.
[64]	ZHU H C, JIANG Z H, LI H B, et al. Effects of nitrogen segregation and solubility on the formation of nitrogen gas pores in 21.5 Cr-1.5 Ni duplex stainless steel[J]. Metallurgical and Materials Transactions:B, 2017, 48(5): 2493.
[65]	陈书浩,王新华,何肖飞,等.帘线钢中氮含量对TiN析出的影响[J].钢铁,2012,47(5):29.
[66]	DAI K, WANG B, XUE F, et al. Formation of nitrogen bubbles during solidification of duplex stainless steels[J]. Metallurgical and Materials Transactions:B, 2018, 49(4): 2011.
[67]	李花兵,姜周华.不锈钢熔体中氮溶解度的热力学计算模型[J].东北大学学报(自然科学版),2007(5):672.
[68]	Sano M, Fujita Y, Mori K. Formation of bubbles at single nonwetted nozzles in mercury[J]. Metallurgical and Materials Transactions:B, 1976, 7(2): 300.
[69]	JIANG Z H, LI H B, CHEN Z P, et al. The nitrogen solubility in molten stainless steel[J]. Steel Research International, 2005, 76(10): 740.
[70]	张峰,李光强,朱诚意,等.氮在液态Fe-Cr-Mn(Ni)系不锈钢中的溶解[J].材料与冶金学报,2005,4(3):178.
[71]	Katz J D, King T B. The kinetics of nitrogen absorption and desorption from a plasma arc by molten iron[J]. Metallurgical and Materials Transactions:B, 1989, 20(2): 175.
[72]	WU W P. Effect of surface active elements on nitrogen reaction with melts[J]. Ironmaking and Steelmaking, 1995, 22(4): 303.
[73]	Zhu J, Mukai K. The influence of oxygen on the rate of nitrogen absorption into molten iron and Marangoni convection[J]. ISIJ International, 1998, 38(3): 220.
[74]	Fruehan R J, Martonik L J. The rate of absorption of hydrogen into iron and of nitrogen into Fe-Cr and Fe-Ni-Cr alloys containing sulfur[J]. Metallurgical Transactions:B, 1981, 12(2): 379.
[75]	Jun Z, Shi F, Mukai K, et al. Numerical analysis of nitrogen absorption rate accompanied with marangoni convection in the molten iron under non-inductive stirring condition[J]. ISIJ International, 1999, 39(5): 409.
[76]	李晶,傅杰,迪林,等.溶解氧对钢液吸氮影响的研究[J].钢铁,2002,37(8):19.
[77]	唱鹤鸣,孟庆应,傅杰.金属液的脱氮[J].钢铁研究学报,1995 (5):73.
[78]	Dwivedi S K, Vishwakarma M. Effect of hydrogen in advanced high strength steel materials[J]. International Journal of Hydrogen Energy, 2019, 44(51): 28007.
[79]	Okayasu M, Yang L. Influence of microstructure on the mechanical properties and hydrogen embrittlement characteristics of 1800 MPa grade hot-stamped 22MnB5 steel[J]. Journal of Materials Science, 2019, 54(6): 5061.
[80]	LIU Y L, ZHANG Y, ZHOU H B, et al. Vacancy trapping mechanism for hydrogen bubble formation in metal[J]. Physical Review B Condensed Matter and Materials Physics, 2009, 79(17): 172103.
[81]	Condon J B, Schober T. Hydrogen bubbles in metals[J]. Journal of Nuclear Materials, 1993, 207: 1.
[82]	韩金昊,张炯明,尹延斌.钢中典型气泡理化特征的基础研究[J].炼钢,2017,33(5):46.