Φ35mm GCr15的冷却速度与碳化物网状关系的分析
马丙涛, 马佐仓, 张 武, 于利国
莱钢股份有限公司,山东莱芜 271104
Analysis of the Relationship Between Φ35 mm GCr15 Cooling Speed and Carbide Mesh
摘要 以Φ35mm GCr15轴承钢为突破口,结合现场工艺条件,分析轴承钢冷却工艺,通过实验测定钢材空冷和快速冷却两种冷却参数,做出冷却曲线对比图,以得到合理的冷却速度,减少、终消除轧材后的网状碳化物组织。
关键词 :
GCr15 ,
网状碳化物 ,
冷却速度
Abstract :Based on Φ 35mm GCr15 steel as a breakthrough, combined the technology conditions, analysis bearing steel cooling process, through experiment mensuration steel air-cooling and fast cooling two cooling parameters, make cooling curve to get reasonable comparison chart, the cooling speed, reducing, eventually eliminate the metal rolling Carbide reticular.
Key words :
GCr15
carbide reticular
cooling speed
收稿日期: 2011-01-31
出版日期: 2011-10-19
通讯作者:
马佐仓
E-mail: lgmzc@163.com
[1]
马丙涛, 刘超群, 林洁, 张迎秋. GCr15钢加热工艺与液析、带状的关系 [J]. Journal of Materials Sciences & Technology, 2012, 22(7): 24-27.
[2]
钟晓丹, 李秉强, 宋满堂, 徐明, 邹宗树. 改善轴承钢GCr15矩形坯缩孔的生产实践 [J]. Journal of Materials Sciences & Technology, 2011, 21(3): 31-34.
[3]
于天忱,范连明,张元韬,宋满堂. 低表面温度轧制大规格轴承钢GCr15工艺实践 [J]. Journal of Materials Sciences & Technology, 2011, 21(2): 34-37.
[4]
罗森1 ,祭程1 ,朱苗勇1 ,谭建平1 ,胡黎宁2 ,钟保军2. 基于凝固传热模型的轴承钢GCr15二冷研究与应用 [J]. Journal of Materials Sciences & Technology, 2009, 19(8): 1-1.
[5]
杨洪波1 ,马宝国2 ,朱伏先1 ,刘相华1. GCr15球化退火行为和力学性能的研究 [J]. Journal of Materials Sciences & Technology, 2008, 18(10): 20-20.
[6]
赵杰1 ,薛松2 ,席军良2. GCr15钢液析缺陷控制工艺的探讨与改进 [J]. Journal of Materials Sciences & Technology, 2007, 17(2): 12-12.