惰性气体保护下顶渣精炼的应用
白瑞国,周学禹,翁玉娟,徐立山,高海,何凯
承德新新钒钛股份有限公司炼钢厂,河北 承德 067002
Application of TopSlag Refining in Inert Gas Protecting
BAI Ruiguo,ZHOU Xueyu,WENG Yujuan,X Lishang,GAO Hai,HE Kai
Steelmaking Works ,Chengde Xinxin Vanadium and Titanium Co Ltd, Chengde 067002, Hebei,China
摘要 介绍了利用CASOB装置在惰性气体保护下进行顶渣精炼工艺过程。该工艺能有效降低钢液中氧,有较好的脱硫效果,可显著提高钢液洁净度、减少夹杂物,使用较低的成本取得较好的精炼效果。
关键词 :
顶渣精炼 ,
非金属夹杂物 ,
洁净度
Abstract :Topslag refining process in CASOB unit under inert gas protection is introduced. The process can lower the content of oxygen and sulfur in steel liquid effectively, decrease the inclusion content ,raise the steel liquid cleanness and lower the cost to obtain better refining result.
Key words :
topslag refining
nonmetallic inclusion
cleanliness
收稿日期: 1900-01-01
[1]
余国松. 1215MS易切削钢盘条翘皮成因 [J]. , 2014, 24(4): 26-30.
[2]
傅向葵,傅一迪. 基于人工智能非金属夹杂物的检测与研究 [J]. , 2014, 24(11): 14-17.
[3]
张彩东, 杨晓江, 王 峰, 张大勇. 唐钢RH钢水洁净度分析与研究 [J]. Journal of Materials Sciences & Technology, 2013, 23(8): 9-13.
[4]
彭其春 , 于学森 , 熊 伟 , 盛喜松 , 罗传清 , 刘 俊. 不同浇铸阶段低碳钢连铸板坯洁净度研究 [J]. Journal of Materials Sciences & Technology, 2012, 22(8): 17-21.
[5]
李静敏, 王敏, 王平安, 李怡宏, 张立强, 包燕平. 车桥管用20Mn2钢的二次氧化行为 [J]. Journal of Materials Sciences & Technology, 2012, 22(5): 34-37.
[6]
王国栋, 吕亚伟. 82B硬线钢夹杂物控制研究与轧制工艺优化 [J]. Journal of Materials Sciences & Technology, 2012, 22(3): 15-17.
[7]
王朝阳 , 巩文旭, 贺建哲, 郑淑国, 朱苗勇. 精炼钢包底吹氩性能优化物理模拟研究 [J]. Journal of Materials Sciences & Technology, 2012, 22(10): 3-7.
[8]
汪庆国,李京社,唐海燕,王宏斌,宁晓钧. LD-LF-CC工艺生产的82B钢铸坯洁净度研究 [J]. Journal of Materials Sciences & Technology, 2011, 21(11): 34-39.
[9]
汪国才 史怀言. 车轮用钢生产的洁净度控制技术 [J]. Journal of Materials Sciences & Technology, 2009, 19(9): 36-36.
[10]
王剑斌1 ,李京社1 ,杨树峰1 ,黄运华1 ,胡道锋2 ,李翔2. ER70s6焊丝钢洁净度和表面质量研究 [J]. Journal of Materials Sciences & Technology, 2007, 17(5): 41-41.
[11]
冯巍1 ,朱传运1 ,李德强2 ,刘承军1 ,姜茂发1. IF钢板坯连铸结晶器内钢液流场的模拟与优化 [J]. Journal of Materials Sciences & Technology, 2007, 17(12): 28-28.
[12]
王永胜, 杜晓建, 王庆祥. HP295钢在LD-Bar-CC工艺中的非金属夹杂物研究
[J]. Journal of Materials Sciences & Technology, 2006, 16(6): 1-1.