高强度H型钢的研究与开发
程鼎1 ,杨俊2
1.马鞍山钢铁股份有限公司第三钢轧总厂,安徽 马鞍山 243000; 2.马鞍山钢铁股份有限公司销售公司,安徽 马鞍山 243000
Development of High Strength HBeam
CHENG Ding1 ,YANG Jun2
1.No 3 Steel Making and Rolling Plant of Ma′anshan Iron and Steel Co Ltd, Ma′anshan 243000,Anhui China; 2.Sales Department of Ma′anshan Iron and Steel Co Ltd,Ma′anshan 243000,Anhui, China
摘要 研究了控制轧制中各相关因素和铌、钒等微合金元素在钢中的作用机制;阐述了微合金化和控制轧制技术在高强度H型钢开发过程中的应用效果;开发出了400 MPa以上级别的高强度H型钢。
关键词 :
高强度 ,
微合金化 ,
控制轧制 ,
H型钢
Abstract :The correlation of different factors in controlled rolling and effect of Nb/V microalloying element in Hbeam were analyzed. A technique to get high strength Hbeam through microalloying and controlled rolling was introduced. Therefore,more than 400 MPa highstrength Hbeam were produced successfully.
Key words :
high strength
microalloying
controlled rolling
Hbeam
收稿日期: 1900-01-01
[1]
张浩,潘世群. 氮对钒微合金化钢筋组织与性能的影响 [J]. , 2014, 24(1): 11-13.
[2]
刘海波. TMCP工艺在低合金钢生产中的应用 [J]. Journal of Materials Sciences & Technology, 2013, 23(9): 22-25.
[3]
郭星晔, 朱国明, 吕超, 张思勋, 康永林. 大型H型钢轧制热力耦合模拟及腹板波浪分析 [J]. Journal of Materials Sciences & Technology, 2013, 23(3): 26-32.
[4]
李江波. 高效生产热轧H型钢的新工艺 [J]. Journal of Materials Sciences & Technology, 2013, 23(1): 42-44.
[5]
尹雨群, 雷玄威, 吴开明. 超高强度管线钢的开发现状与趋势 [J]. Journal of Materials Sciences & Technology, 2012, 22(9): 5-9.
[6]
魏薇, 费燕, 李俊, 勾新勇. 高寒地区用H型钢低温冲击性能分析与改进 [J]. Journal of Materials Sciences & Technology, 2012, 22(5): 18-20.
[7]
完卫国, 孙维, 郭湛. 铌微合金化控冷HRB400钢筋的试制 [J]. Journal of Materials Sciences & Technology, 2011, 21(5): 7-12.
[8]
刘晓雄, 韩静涛, 董瑞峰. 厚规格D36高强度船用结构钢正火工艺的研究 [J]. Journal of Materials Sciences & Technology, 2011, 21(12): 49-53.
[9]
唐郑磊, 许少普, 张红伟, 杨 东, 朱成杰, 庞百鸣. 低应变时效敏感性焊管用特厚板S355NL-Z35的开发研究 [J]. Journal of Materials Sciences & Technology, 2011, 21(12): 35-38.
[10]
杨振东. 抗层状撕裂钢板Q345E-Z35的开发 [J]. Journal of Materials Sciences & Technology, 2010, 20(5): 17-17.
[11]
苏晓峰. 高强度船板断口合格率影响机理探讨 [J]. Journal of Materials Sciences & Technology, 2010, 20(3): 18-18.
[12]
刘年富,廖卫团,杨太阳, 温志红. E级船用结构钢板的开发 [J]. Journal of Materials Sciences & Technology, 2009, 19(8): 35-35.
[13]
周玉丽1 ,王全礼1 ,鲁丽燕1 ,邸全康1 ,李艳平2 ,刘健2. 非微合金化HRB400钢筋生产技术研究 [J]. Journal of Materials Sciences & Technology, 2009, 19(7): 18-18.
[14]
潘涛,杨才福. 低成本VN微合金化高强度钢筋的研究与生产 [J]. Journal of Materials Sciences & Technology, 2009, 19(7): 13-13.
[15]
安守勇1 ,夏佃秀1 ,侯东华1 ,赵展鹏1 ,马昊2. 厚规格高强度钢板探伤不合原因分析 [J]. Journal of Materials Sciences & Technology, 2009, 19(4): 28-28.