退火工艺对GH4169合金带材组织和力学性能的影响

doi:10.13228/j.boyuan.issn1006-9356.20220739

摘要
图/表
参考文献
相关文章 (15)

全文: PDF (2303 KB) HTML (1 KB)
输出: BibTeX | EndNote (RIS)

摘要为解决GH4169合金带材国产化制备工艺不成熟导致的组织及性能控制不稳定问题,对厚度为0.4 mm的GH4169合金带材的热处理工艺进行研究。讨论了不同退火温度、不同保温时间对带材金相组织、力学性能的影响,结果表明,退火温度对带材显微组织和力学性能存在显著影响,随着退火温度的提高,合金带材晶粒尺寸增大,同时合金抗拉强度、屈服强度和硬度呈下降趋势,而伸长率呈升高趋势;适当缩短保温时间可以使晶粒尺寸均匀,并起到细化晶粒的作用,与此同时,合金力学性能表现出抗拉强度、屈服强度和硬度增大,同时伸长率呈下降趋势。综合分析组织及性能,0.4 mm的GH4169合金带材最佳退火工艺为退火温度1 050 ℃、保温时间1.5 min,在该工艺下带材的晶粒度为8.5级,抗拉强度为870.5 MPa,屈服强度为389.5 MPa,伸长率为51.5%,维氏硬度为204HV1。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	作者相关文章
	宋艳丽
	安军靖
	王惠生
	刘双娟
	张龙
	梁田

关键词 ： GH4169合金带材, 退火温度, 保温时间, 晶粒尺寸, 力学性能

Abstract：In order to solve the problem of unstable microstructure and property control caused by the immature domestic preparation process of GH4169 alloy strip, the heat treatment process of GH4169 alloy strip with a thickness of 0.4 mm was studied. The effects of different annealing temperatures and different holding times on the metallographic structure and mechanical properties of the strip were disscussed. The results show that the annealing temperature has significant effect on the microstructure and mechanical properties of the alloy strip. With the increase of annealing temperature, the grain size of alloy strip increases, while the tensile strength, yield strength and hardness of the alloy decrease, and the elongation increases. Appropriately shortening the holding time can make the grain size uniform, and play the role in refining the grain. At the same time, the mechanical properties of the alloy show an increasing trend in tensile strength, yield strength and hardness, and a decreasing trend in elongation. Comprehensive analysis of the microstructure and properties shows that the optimal annealing process for the 0.4 mm GH4169 alloy strip is annealing temperature of 1 050 ℃ and holding time of 1.5 min. Under this process, the grain size of the strip is grade 8.5, the tensile strength is 870.5 MPa, the yield strength is 389.5 MPa, the elongation is 51.5%, and the Vickers hardness is 204HV1.

Key words： GH4169 alloy strip annealing temperature holding time grain size mechanical property

收稿日期: 2022-09-08

基金资助:核级镍基合金带材国产化及先进屏蔽材料成型控性研究项目

作者简介: 宋艳丽(1980—), 女, 硕士, 工程师; E-mail: songyanli@atmcn.com

引用本文:

宋艳丽, 安军靖, 王惠生, 刘双娟, 张龙, 梁田. 退火工艺对GH4169合金带材组织和力学性能的影响[J]. 中国冶金, 2022, 32(12): 66-71. SONG Yan-li, AN Jun-jing, WANG Hui-sheng, LIU Shuang-juan, ZHANG Long, LIANG Tian. Effect of annealing process on microstructure and mechanical properties of GH4169 alloy strip[J]. China Metallurgy, 2022, 32(12): 66-71.

链接本文:

http://www.zgyj.ac.cn/CN/10.13228/j.boyuan.issn1006-9356.20220739 或 http://www.zgyj.ac.cn/CN/Y2022/V32/I12/66

[1]	王岩,林琳,邵文柱,等. 固溶处理对GH4169合金组织与性能的影响[J]. 材料热处理学报,2007,28(B08):176.
[2]	曹国鑫,张麦仓,董建新,等. Nb含量对GH4169合金钢锭凝固及均匀化过程相演化规律的影响[J]. 稀有金属材料与工程,2014,43(1):103.
[3]	孔豪豪,杨树峰,曲敬龙,等. GH4169铸锭中夹杂物的类型及分布规律[J]. 航空学报,2020,41(4):423306.
[4]	王宁,高锦国,杨曙磊,等. 真空感应熔炼中夹杂物运动行为数值模拟[J]. 中国冶金,2021,31(12):20.
[5]	王迪,杨树峰,曲敬龙,等. GH4169电渣重熔铸锭表层夹杂物分布规律[J]. 钢铁,2021,56(2):155.
[6]	赵朋,杨树峰,杨曙磊,等. 镍基高温合金均质化冶炼研究进展[J]. 中国冶金,2021,31(4):1.
[7]	尹彬, 李万明, 吴少鹏,等. Inconel718高温合金电渣重熔铝钛元素烧损热力学分析[J]. 钢铁,2019,54(5):86.
[8]	杜金辉,吕旭东,董建新,等. 国内变形高温合金研制进展[J]. 金属学报,2019,55(9):1115.
[9]	谢锡善,董建新,付书红,等. γ″和γ'相强化的Ni-Fe基高温合金GH4169的研究与发展[J]. 金属学报,2010,46(11):1289.
[10]	高天明,程晓农,罗锐,等. 时效处理对GH4169合金显微组织及高温拉伸变形行为的影响[J]. 金属热处理,2020,45(8):119.
[11]	王林珠,李翔,刘录凯,等. 镍基高温合金中非金属夹杂物成分和特征控制[J]. 中国冶金,2021,31(5):32.
[12]	李红宇,刘杨,薛晶晶,等. 冷轧变形量对核电用GH4169合金组织和拉伸性能的影响[J]. 材料热处理学报,2020,41(10):38.
[13]	蔡大勇,张伟红,刘文昌,等. Inconel 718合金中δ相溶解动力学及对缺口敏感性的影响[J]. 有色金属,2003,55(1):4.
[14]	CAI Da-yong,ZHANG Wei-hong,NIE Pu-lin,et al. Dissolution kinetics and behavior of δ phase in Inconel 718[J]. Transactions of Nonferrous Metals Society of China,2003,13(6):1338.
[15]	宋宜四,高万夫,胡卓婵. 热处理对Inconel718镍基合金组织及耐蚀性能的影响[J]. 石油化工高等学校学报,2009,22(4):67.