Effect of quenching process on microstructure and properties of 10Cr15MoVCo high-carbon martensitic stainless steel
SUN Chang1, LI Jing1, LI Shou-hui1, ZHU Shuang1, LI Ji-hui2
1. State Key Laboratory of Advanced Metallurgy, University of Science and Technology Beijing, Beijing 100083, China; 2. Yangjiang Shibazi Group, Yangjiang 529931, Guangdong, China
Abstract:In order to obtain 10Cr15MoVCo high-carbon martensitic stainless steel with good organization and properties, the effects of quenching temperatures and soaking time on the microstructure and mechanical properties of experimental steel were analyzed by scanning electron microscopy, X-ray diffraction, rockwell hardness tester and impact testing machine. The results show that with the increase of quenching temperature, the average size and area fraction of secondary carbides decrease and the retained austenite content increases, and the hardness of the steel first increases and then decreases. After the quenching temperature exceeds 1 050 ℃, the impact toughness decreases significantly, and the optimum quenching temperature is 1 050 ℃. At the optimum quenching temperature, the average size and area fraction of secondary carbides decrease and the residual austenite content increases slightly with the increase of soaking time. The hardness of the steel first increases and then decreases, but the overall change is small. The impact toughness increases with the increase of soaking time, and the optimum soaking time is 15 min.
孙畅, 李晶, 李首慧, 朱爽, 李积回. 淬火工艺对高碳马氏体不锈钢10Cr15MoVCo组织及性能的影响[J]. 中国冶金, 2023, 33(4): 73-80.
SUN Chang, LI Jing, LI Shou-hui, ZHU Shuang, LI Ji-hui. Effect of quenching process on microstructure and properties of 10Cr15MoVCo high-carbon martensitic stainless steel[J]. China Metallurgy, 2023, 33(4): 73-80.
WANG H,HONG D,HOU L,et al. Influence of tempering temperatures on the microstructure,secondary carbides and mechanical properties of spray-deposited AISI M3:2 high-speed steel[J]. Materials Chemistry and Physics,2020,255:123554.
[3]
CHEN R C,WANG Z G,ZHU F S,et al. Effects of rare-earth micro-alloying on microstructures,carbides,and internal friction of 51CrV4 steels[J]. Journal of Alloys and Compounds,2020,824:153849.
[4]
LIU B,QIN T,XU W,et al. Effect of tempering conditions on secondary hardening of carbides and retained austenite in spray-formed M42 high-speed steel[J]. Materials,2019,12(22):3714.
[5]
Lo K H,Cheng F T,Man H C. Laser transformation hardening of AISI 440C martensitic stainless steel for higher cavitation erosion resistance[J]. Surface and Coatings Technology,2003,173(1):96.
[6]
WANG H,LI J,SHI C B,et al. Evolution of carbides in H13 steel in heat treatment process[J]. Materials Transactions,2017,58(2):152.
Yan Z,Liu K,Eckert J. Effect of tempering and deep cryogenic treatment on microstructure and mechanical properties of Cr-Mo-V-Ni steel[J]. Materials Science and Engineering A,2020,787:139520.
DU X D,SONG Z L,CHEN Y Q,et al. Influence of heat treatment on the microstructure and properties of 7Cr17Mo martensitic stainless steel[J]. Advanced Materials Research,2013,820:15.
Salleh S H,Omar M Z,Syarif J,et al. Investigation of microstructures and properties of 440C martensitic stainless steel[J]. International Journal of Mechanical and Materials Engineering,2009,4(2):123.
Bjärbo A,Hättestrand M. Complex carbide growth,dissolution,and coarsening in a modified 12 pct chromium steel—An experimental and theoretical study[J]. Metallurgical and Materials Transactions A,2001,32(1):19.
[21]
Krishna S C,Gangwar N K,Jha A K,et al. Effect of heat treatment on the microstructure and hardness of 17Cr-0.17N-0.43C-1.7Mo martensitic stainless steel[J]. Journal of Materials Engineering and Performance,2015,24(4):1656.
Rajasekhar A,Reddy G M,Mohandas T,et al. Influence of post-weld heat treatments on microstructure and mechanical properties of AISI 431 martensitic stainless steel friction welds[J]. Materials Science and Technology,2008,24(2):201.