Rolling contact fatigue and life prediction model of bearing steel
LÜ Hao-tian1,2, YANG Liang1,2, CHEN Hao1,2, CUI Yi-nan3,4, FU Han-wei5, ZHANG Chi1,2
1. Key Laboratory of Advanced Materials of Ministry of Education, Beijing 100084, China; 2. School of Materials Science and Engineering, Tsinghua University, Beijing 100084, China; 3. Key Laboratory of Applied Mechanics of Ministry of Education, Beijing 100084, China; 4. School of Aerospace Engineering, Tsinghua University, Beijing 100084, China; 5. School of Materials Science and Engineering, Beihang University, Beijing 100191, China
Abstract:Bearings are amongst the most vital steel components in the modern industry, and the main failure mode of bearings is the rolling contact fatigue (RCF) in the subsurface. In order to better understand the RCF failure process of bearing steel, the rolling contact fatigue process of bearing steel from two aspects of mechanics and materials science was first described, proposing that the essence of RCF process was a subsurface microstructural alternation process caused by the interaction between dislocation and carbon atoms. Then it introduced the engineering model and theoretical model for predicting the RCF life of bearings, pointing out that the combination of engineering models and theoretical models along with the combination of microstructural alternations under cyclic loading and RCF life were two important directions for future work. Finally, the problem of whole-process and multi-scale design for bearing steel was prospected, and the important work ideas of coupling physical metallurgy algorithms with artificial intelligence algorithms as well as multidisciplinary intersection were put forward.
吕皓天, 杨亮, 陈浩, 崔一南, 付悍巍, 张弛. 轴承钢的滚动接触疲劳与寿命预测模型[J]. 中国冶金, 2020, 30(9): 24-36.
LÜ Hao-tian, YANG Liang, CHEN Hao, CUI Yi-nan, FU Han-wei, ZHANG Chi. Rolling contact fatigue and life prediction model of bearing steel[J]. China Metallurgy, 2020, 30(9): 24-36.
Tomasello C M, Maloney Iii J L. Aerospace bearing and gear alloys[J]. Advanced Materials and Processes, 1998, 154(1): 58.
[6]
Warhadpande A, Sadeghi F, Evans R D. Microstructural alterations in bearing steels under rolling contact fatigue part 1—historical overview[J]. Tribology Transactions, 2013, 56(3): 349.
[7]
Kang J H, Hosseinkhani B, Rivera-Díaz-del-Castillo P E J. Rolling contact fatigue in bearings: multiscale overview[J]. Materials Science and Technology, 2012, 28(1): 44.
[8]
Johnson K L. Contact Mechanics[M]. Cambridge: Cambridge University Press, 1987.
[9]
Rivera-Díaz-del-Castillo P. Rolling Contact Fatigue in Bearings: Phenomenology and Modelling Techniques[M]. West Conshohocken, PA: ASTM International, 2012.
[10]
Sadeghi F, Jalalahmadi B, Slack T S, et al. A review of rolling contact fatigue[J]. Journal of Tribology, 2009, 131(4): 041403.
[11]
Voskamp A P. Microstructural Changes During Rolling Contract Fatigue: Metal Fatigue in the Subsurface Region of Deep Groove Ball Bearing Inner Rings[D]. Delft: Delft University of Technology, 1997.
[12]
Voskamp A P. Material response to rolling contact loading[J]. Journal of Tribology, 1985, 107(3): 359.
[13]
Bhargava V, Hahn G T, Rubin C A. Rolling contact deformation, etching effects, and failure of high-strength bearing steel[J]. Metallurgical Transactions:A, 1990, 21(7): 1921.
[14]
Vegter R H, Slycke J T, Beswick J, et al. The role of hydrogen on rolling contact fatigue response of rolling element bearings[J]. Journal of ASTM International, 2010, 7(2): 201.
[15]
Voskampk A P, Mittemeijer E J. Crystallographic preferred orientation induced by cyclic rolling contact loading[J]. Metallurgical and Materials Transactions:A, 1996, 27(11):3445.
[16]
Turteltaub S, Suiker A S J. Transformation-induced plasticity in ferrous alloys[J]. Journal of the Mechanics and Physics of Solids, 2005, 53(8): 1747.
[17]
Arakere N K, Subhash G. Work hardening response of M50-NiL case hardened bearing steel during shakedown in rolling contact fatigue[J]. Materials Science and Technology, 2012, 28(1): 34.
[18]
Williams J A. The influence of repeated loading, residual stresses and shakedown on the behaviour of tribological contacts[J]. Tribology International, 2005, 38(9): 786.
[19]
Bower A F, Johnson K L. Plastic flow and shakedown of the rail surface in repeated wheel-rail contact[J]. Wear, 1991, 144(1): 1.
[20]
Koiter W T. A new general theorem on shakedown of elastic-plastic structures[J]. Proc Koninkl Ned Akad Wet: B, 1956, 59: 24.
[21]
Voskamp A P, Mittemeijer E J. The effect of the changing microstructure on the fatigue behaviour during cyclic rolling contact loading[J]. Zeitschrift für Metallkunde, 1997, 88(4): 310.
[22]
Hahn G T, Bhargava V, Chen Q. The cyclic stress-strain properties, hysteresis loop shape, and kinematic hardening of two high-strength bearing steels[J]. Metallurgical Transactions: A, 1990, 21(2): 653.
[23]
Fu H, Rivera-Díaz-del-Castillo P E J. A unified theory for microstructural alterations in bearing steels under rolling contact fatigue[J]. Acta Materialia, 2018, 155: 43.
[24]
Bhadeshia H K D H. Steels for bearings[J]. Progress in Materials Science, 2012, 57(2): 268.
[25]
Grabulov A, Ziese U, Zandbergen H W. TEM/SEM investigation of microstructural changes within the white etching area under rolling contact fatigue and 3-D crack reconstruction by focused ion beam[J]. Scripta Materialia, 2007, 57(7): 635.
[26]
Loy B, Mccallum R. Mode of formation of spherical particles in rolling contact fatigue[J]. Wear, 1973, 24(2): 219.
[27]
Tricot R, Monnot J, Lluansi M. How microstructural alterations affect fatigue properties of 52100 steel[J]. Metal Engineering Quarterly,1972, 12(2): 39.
[28]
Grabulov A, Petrov R, Zandbergen H. EBSD investigation of the crack initiation and TEM/FIB analyses of the microstructural changes around the cracks formed under rolling contact fatigue (RCF)[J]. International Journal of Fatigue, 2010, 32(3): 576.
[29]
Bruce T, Rounding E, Long H, et al. Characterisation of white etching crack damage in wind turbine gearbox bearings[J]. Wear, 2015, 338: 164.
[30]
Becker P C. Microstructural changes around non-metallic inclusions caused by rolling-contact fatigue of ball-bearing steels[J]. Metals Technology, 1981, 8(1): 234.
[31]
Solano-Alvarez W, Pickering E J, Peet M J, et al. Soft novel form of white-etching matter and ductile failure of carbide-free bainitic steels under rolling contact stresses[J]. Acta Materialia, 2016, 121: 215.
[32]
Evans M H, Walker J C, Ma C, et al. A FIB/TEM study of butterfly crack formation and white etching area (WEA) microstructural changes under rolling contact fatigue in 100Cr6 bearing steel[J]. Materials Science and Engineering: A, 2013, 570: 127.
[33]
Kang J H, Hosseinkhani B, Williams C A, et al. Solute redistribution in the nanocrystalline structure formed in bearing steels[J]. Scripta Materialia, 2013, 69(8): 630.
[34]
Kadin Y, Sherif M Y. Energy dissipation at rubbing crack faces in rolling contact fatigue as the mechanism of white etching area formation[J]. International Journal of Fatigue, 2017, 96: 114.
[35]
LI S X, SU Y S, SHU X D, et al. Microstructural evolution in bearing steel under rolling contact fatigue[J]. Wear, 2017, 380/381: 146.
[36]
Cree A R, Faulkner R A, Lyne A. Cementite particle coarsening during spheroidisation of bearing steel SAE 52100[J]. Materials Science and Technology, 1995, 11(6): 566.
[37]
Jones A B. Metallographic observations of ball bearing fatigue phenomena[J]. Symposium on Testing of Bearings, 1946, 46: 1.
[38]
Kang J H, Hosseinkhani B, Vegter R H, et al. Modelling dislocation assisted tempering during rolling contact fatigue in bearing steels[J]. International Journal of Fatigue, 2015, 75: 115.
[39]
Lund T. Structural alterations in fatigue-tested ball-bearing steel[J]. Jernkontorets Annaler, 1969, 153(7): 337.
[40]
Buchwald J, Heckel R W. An analysis of microstructural changes in 52100 steel bearings during cyclic stressing[J]. ASM Transactions Quarterly, 1968, 61(4): 750.
[41]
Smelova V, Schwedt A, Wang L, et al. Electron microscopy investigations of microstructural alterations due to classical rolling contact fatigue (RCF) in martensitic AISI 52100 bearing steel[J]. International Journal of Fatigue, 2017, 98:142.
[42]
Mitamura N, Hidaka H, Takaki S. Microstructural development in bearing steel during rolling contact fatigue[J]. Materials Science Forum, 2007, 539-543: 4255.
[43]
Bush J J, Grube W L, Robinson G H. Microstructural and residual stress changes in hardened steel due to rolling contact[J]. ASM Transactions, 1961, 54: 390.
[44]
Popinceanu N G, Diaconescu E, Cretu S. Critical stresses in rolling contact fatigue[J]. Wear, 1981, 71(3): 265.
[45]
Swahn H, Becker P C, Vingsbo O. Martensite decay during rolling contact fatigue in ball bearings[J]. Metallurgical Transactions: A, 1976, 7(8): 1099.
[46]
Fu H, Song W, Galindo-Nava E I, et al. Strain-induced martensite decay in bearing steels under rolling contact fatigue: Modelling and atomic-scale characterisation[J]. Acta Materialia, 2017, 139: 163.
[47]
Voskamp A P. Microstructural stability and bearing performance[M]. West Conshohocken, PA: ASTM International,2002.
[48]
Polonsky I A, Keer L M. On white etching band formation in rolling bearings[J]. Journal of the Mechanics and Physics of Solids, 1995, 43(4): 637.
[49]
Ganti S, Turner B, Kirsch M, et al. Three-dimensional (3D) analysis of white etching bands (WEBs) in AISI M50 bearing steel using automated serial sectioning[J]. Materials Characterization, 2018, 138: 11.
[50]
Ragnar Sterlund, Olof Vingsbo. Phase changes in fatigued ball bearings[J]. Metallurgical Transactions: A, 1980, 11(5): 701.
[51]
Muro H, Tsushima N. Microstructural, microhardness and residual stress changes due to rolling contact[J]. Wear, 1970, 15(5): 309.
[52]
Martin J A, Borgese S F, Eberhardt A D. Microstructural alterations of rolling bearing steel undergoing cyclic stressing[J]. Journal of Fluids Engineering, 1966, 88(3): 555.
[53]
Borgese S. A study of the growth mechanism of lenticular carbides in cyclically stressed 52100 steel[J]. Journal of Lubrication Technology, 1970, 92(1): 54.
[54]
Zwirlein O, Schlicht H. Rolling contact fatigue mechanisms-accelerated testing versus field performance[J]. Rolling Contact Fatigue Testing of Bearing Steels, 1982, 28: 358.
[55]
Fu H, Galindo-Nava E I, Rivera-Díaz-del-Castillo P E J. Modelling and characterisation of stress-induced carbide precipitation in bearing steels under rolling contact fatigue[J]. Acta Materialia, 2017, 128(Complete): 176.
[56]
Krauss G. Heat treated martensitic steels: Microstructural systems for advanced manufacture[J]. ISIJ International, 1995, 35(4): 349.
[57]
Weibu U W. A statistical theory of the su'ength of materials[J]. Royal Swedish Institute for Engineering Research, 1939, 151(15): 1.
[58]
Lundberg G, Palmgren A. Dynamic capacity of rolling bearings[J]. Acta Polytechnica Mechanical Engineering Series, Royal Swedish Academy of Engineering Sciences, 1947, 1(3): 1.
[59]
International Organization for Standardization. Rolling Bearings: Dynamic Load Ratings and Rating Life[M]. Geneva: International Organization for Standardization, 1990.
[60]
Zaretsky E V. STLE Life Factors for Rolling Bearings[M]. Chicago: STLE Special Publication, 1992.
[61]
Parker R J, Zaretsky E V. Reevaluation of the Stress-life Relation in Rolling-Element Bearings[M]. Washington: National Aeronautics and Space Administration, 1972.
[62]
Ioannides E, Harris T A. A new fatigue life model for rolling bearings[J]. Journal of Tribology, 1985, 107(3): 367.
[63]
Schlicht H, Schreiber E, Zwirlein O. Fatigue and failure mechanism of bearings[J]. Fatigue of Engineering Materials and Structures, 1986, 1: 85.
[64]
SHAO E, HUANG X, WANG C, et al. A method of detecting rolling contact crack initiation and the establishment of crack propagation curves[J]. STLE Transactions, 1988, 31(1): 6.
[65]
Otsuka A, Sugawara H, Shomura M. A test method for mode II fatigue crack growth relating to a model for rolling contact fatigue[J]. Fatigue ang Fracture of Engineering Materials and Structures, 1996, 19(10): 1265.
[66]
Miyashita Y, Yoshimura Y, Xu J Q, et al. Subsurface crack propagation in rolling contact fatigue of sintered alloy[J]. JSME International Journal, 2003, 46(3): 341.
[67]
Harris T A, Barnsby R M. Life ratings for ball and roller bearings[J]. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2001, 215(6): 577.
Keer L M, Bryant M D. A pitting model for rolling contact fatigue[J]. Journal of Lubrication Technology, 1983, 105(2): 198.
[70]
ZHOU R S. Surface topography and fatigue life of rolling contact bearing[J]. Tribology Transactions, 1993, 36(3):329.
[71]
Vincent A, Lormand G, Lamagnere P, et al. From White Etching Areas Formed Around Inclusions to Crack Nucleation in Bearing Steels Under Rolling Contact Fatigue[M]. West Conshohocken, PA: ASTM International, 1998.
[72]
Pandkar A S, Arakere N, Subhash G. Microstructure-sensitive accumulation of plastic strain due to ratcheting in bearing steels subject to rolling contact fatigue[J]. International Journal of Fatigue, 2014, 63: 191.
[73]
Bhattacharyya A, Subhash G, Arakere N. Evolution of subsurface plastic zone due to rolling contact fatigue of M50-NiL case hardened bearing steel[J]. International Journal of Fatigue, 2014, 59: 102.
[74]
Klecka M A, Subhash G, Arakere N K. Microstructure-property relationships in M50-NiL and P675 case-hardened bearing steels[J]. Tribology Transactions, 2013, 56(6):1046.
[75]
Branch N A, Subhash G, Arakere N K, et al. A new reverse analysis to determine the constitutive response of plastically graded case hardened bearing steels[J]. International Journal of Solids and Structures, 2011, 48(3/4): 584.
[76]
Arakere N K. Gigacycle rolling contact fatigue of bearing steels: A review[J]. International Journal of Fatigue, 2016, 93: 238.
GUO S, YU J, LIU X, et al. A predicting model for properties of steel using the industrial big data based on machine learning[J]. Computational Materials Science, 2019, 160:95.