|
|
Numerical and physical simulation on enhancing steel cleanliness by increasing height of two-strand slab tundish |
XIE Xuqi1, FANG Qing1,2, WANG Jiahui1, ZHANG Lichao1, LI Mijia1, ZHANG Hua1 |
1. Key Laboratory for Ferrous Metallurgy and Resources Utilization of Ministry of Education, Wuhan University of Science and Technology, Wuhan 430081, Hubei, China; 2. Hunan Valin Xiangtan Iron and Steel Co., Ltd., Xiangtan 411101, Hunan, China |
|
|
Abstract With the development of continuous casting process towards the direction of large cross section and high casting speed, the capacity of tundish has become key factor restricting production efficiency and billet quality. The flow field, residence time distribution (RTD) curves and inclusion removal rate in two-strand slab tundish of a steelmaking plant with different height additions were numerically and physically investigated. The results show that with the increase of tundish height, the capacity of tundish increases and the average residence time of molten steel increases correspondingly, and the ability of tundish to enhance the cleanliness of molten steel is also improved. When the baffle is raised by 200 mm with the tundish, the average residence time of molten steel in the tundish is extended by 12.1-153.6 s, the volume fraction of dead zone is reduced by 0.31-2.53 percentage points, the average free surface velocity in the impact zone is reduced by 6.7%-15.6%, and the extra temperature drop in the tundish is not obvious. The total removal rate of large size inclusions is increased by 1.63 percentage points, compared with the original tundish and other height expansion schemes. Moreover, when the tundish is heightened by 200 mm, the average residence time of molten steel is reduced from 743.7 s to 677.9 s by increasing the casting speed from 1.35 m/min to 1.50 m/min, but it is still 88.0 s longer than that of the prototype tundish at low casting speed, and volume fraction of dead zone is reduced by 2.18 percentage points, which reflects the advantages of the heightened tundish in continuous casting process with high casting speed. The present study can provide theoretical guidance for steelmaking plants to implement the industrial plan of heightening the tundish height and increasing the casting speed.
|
Received: 15 February 2023
|
|
|
|
[1] |
ZHANG H, FANG Q, LIU C, et al. Effect of flow control devices on grade change process in a five-strand tundish[J]. Metallurgical Research and Technology, 2022, 119(3): 317.
|
[2] |
MAZUMDAR D. Review, analysis, and modeling of continuous casting tundish systems[J]. Steel Research International, 2019, 90(4): 1800279.
|
[3] |
DING C, LEI H, CHEN S, et al. Challenge of residence time distribution curve in tundish for continuous casting of steel[J]. Steel Research International, 2022, 93(10):2200187.
|
[4] |
SAEKI T. Physical model analysis on the formation mechanism of tundish in continuous casting[J]. Tetsu-to-Hagane, 1987, 173(10): 207.
|
[5] |
吴永生, 喻承欢, 骆忠汉, 等. 扩容中间包冶金效果的研究[J]. 炼钢, 2001, 17(1): 38.
|
[6] |
张利君, 刘金刚, 宁林新, 等. 板坯连铸38 t扩容中间包控流装置优化的数值模拟和应用[J]. 特殊钢, 2016, 37(3):1.
|
[7] |
凌海涛. 连铸中间包内夹杂物碰撞长大和去除的研究[D]. 北京: 北京科技大学, 2017.
|
[8] |
王智文, 张智应, 宋介中, 等. 中包扩容提升钢液纯净度生产实践[J]. 山西冶金, 2022, 45(1): 79.
|
[9] |
崔征. 小型真空感应炉中间包结构优化研究[D]. 西安:西安建筑科技大学, 2018.
|
[10] |
LI Y, WU C, XIE X, et al. Numerical simulation and application of tundish cover argon blowing for a two-strand slab continuous casting machine[J]. Metals, 2022, 12(11):1801.
|
[11] |
王家辉, 方庆, 朱爽, 等. 顶旋型湍流抑制器对单流板坯中间包内湍流行为的影响[J]. 钢铁研究学报, 2021, 33(7): 575.
|
[12] |
刘涛, 刘俊达, 陈永锋, 等. 不同湍流模型在中间包钢液流动数值模拟中的适用性研究[J]. 钢铁研究学报, 2022, 34(9): 973.
|
[13] |
CHENG C, LU H, LI Y, et al. Mathematical modeling of flow and heat transfer behavior of liquid slag in continuous casting mold with argon blowing[J]. ISIJ International, 2019, 59(7): 1266.
|
[14] |
赵鹏, 张华, 方庆, 等. 六流小方坯中间包堵流浇注的数值模拟研究[J]. 钢铁研究学报, 2022, 34(5):438.
|
[15] |
祝航航, 王敏, 姚骋, 等. 六流T型中间包夹杂物去除行为的数值模拟[J]. 中国冶金, 2022, 32(8):89.
|
[16] |
FANG Q, ZHANG H, LUO R, et al. Optimization of flow, heat transfer and inclusion removal behaviors in an odd multistrand bloom casting tundish[J]. Journal of Materials Research and Technology, 2020, 9(1): 347.
|
[17] |
王家辉, 张华, 方庆, 等. 顶旋型湍流抑制器优化中间包流场的物理模拟[J]. 钢铁, 2023, 58(2):72.
|
[18] |
葛阳阳. 重轨钢连铸中间包流场优化和夹杂物去除模拟研究[D]. 邯郸: 河北工程大学, 2020.
|
[19] |
郑淑国, 朱苗勇. 多流连铸中间包各流流动特性一致性的判别[J]. 过程工程学报, 2006, 6(4): 522.
|
[20] |
ZHANG H, WANG J, FANG Q, et al. Effect of top-swirling turbulence inhibitor on multiphase flow in a single-strand tundish during transient casting[J]. Steel Research International, 2022, 93(5): 2100536.
|
[21] |
CHEN D, XIE X, LONG M, et al. Hydraulics and mathematics simulation on the weir and gas curtain in tundish of ultrathick slab continuous casting[J]. Metallurgical and Materials Transactions B, 2014, 45: 392.
|
[22] |
马志民, 王家辉, 方庆, 等. 通道式感应加热中间包挡墙优化的物理模拟[J]. 连铸, 2022(4):78.
|
[23] |
李怡宏, 崔鑫, 何奕波, 等. 相似比对中间包模拟试验的影响[J]. 连铸, 2021(5):69.
|
[24] |
CHOI B, LEE S, YOU D. Prediction of molten steel flow in a tundish with water model data using a generative neural network with different clip sizes[J]. Journal of Mechanical Science and Technology, 2022, 36(2): 749.
|
[25] |
CHANG S, ZOU Z, LI B, et al. Modeling inclusion removal when using micro-bubble swarm in a full-scale tundish with an impact pad[J]. Metallurgical and Materials Transactions B, 2022, 53(1): 526.
|
[26] |
于学斌, 颜克权, 周继刚, 等. 非对称型多流中间包的解析[J]. 炼钢, 1999, 15(6):44.
|
|
|
|