Vibration analysis of CSP rolling mill by excitation of transmission-screwdown-strip coupling
ZHANG Yi-fang1, HE Cheng1, CUI Li1, WANG Cai-yi1, YAN Xiao-qiang2
1. School of Intelligent Manufacturing and Control Engineering, Shanghai Polytechnic University, Shanghai 201209, China; 2. School of Mechanical Engineering, University of Science and Technology Beijing, Beijing 100083, China
Abstract:Aiming at the strong vibration phenomenon of CSP rolling mill when rolling high-strength thin strip steel, the online monitoring system was used to track and test the electromechanical and hydraulic signals of rolling mill, and the characteristics of vibration signal for vertical-torsional coupling were obtained. On this basis, the vibration mechanism of transmission-screwdown-strip coupling was discussed, the harmonic response simulation model of transmission-screwdown-strip coupling was constructed by ANSYS. The harmonic response characteristics of rolling mill under multi-excitation were solved, and the maximum vibration response at 42 Hz for F3 rolling mill was obtained, which was basically consistent with the test result on site. The research results have reference value for improving the rolling stability of thin gauge strip, and point out the direction of restraining rolling mill vibration.
张义方, 何成, 崔立, 王才峄, 闫晓强. 传动-压下-带钢耦合激励CSP轧机振动分析[J]. 中国冶金, 2022, 32(9): 79-84.
ZHANG Yi-fang, HE Cheng, CUI Li, WANG Cai-yi, YAN Xiao-qiang. Vibration analysis of CSP rolling mill by excitation of transmission-screwdown-strip coupling[J]. China Metallurgy, 2022, 32(9): 79-84.
Hu P A,Zhao H Y, Ehmann K F. Third-octave-mode chatter in rolling.Part 2: Stability of a single-stand mill[J]. Proceedings of the Institution of Mechanical Engineers,2006,220(8):1279.
[7]
Yun I S,Ehmaan K F,Wilson W R D,et al.Chatter in the strip rolling process,Part3:Chatter model[J].Journal of manufacturing science and engineer,1998,120(2):343.
Heidari A, Forouzan M R, Niroomand M R. Development and evaluation of friction models for chatter simulation in cold strip rolling[J].International Journal of Advanced Manufacturing Technology,2018(96):2055.
ZENG Ling-qing, ZANG Yong, GAO Zhi-ying. Hopf bifurcation control for rolling mill multiple-mode-coupling vibration under nonlinear friction[J]. Journal of Vibration and Acoustics-Transactions of the ASME, 2017, 139(6): 221.
[18]
Adam Bar,Andrzej Swiatoniowski. Interdependence between the rolling speed and non-linear vibrations of the mill system[J]. Journal of Materials Processing Technology,2004,155 (30):2116.