Reduction of NOx emission in sintering process based on #br#
optimization of solid fuel particle size
QUE Zhigang1,2,WANG Jinsheng3,AI Xianbin1,WU Shengli2
(1. Institute of Energy Conversion, Jiangxi Academy of Science, Nanchang 330096, Jiangxi, China;2. School
of Metallurgical and Ecological Engineering, University of Science and Technology Beijing, Beijing 100083, China;
3. Ironmaking Plant, Fangda Special Steel of Science and Technology Co., Ltd., Nanchang 330012, Jiangxi, China)
In order to reduce the NOx emission by optimizing the size of solid fuel in iron ore sintering process, the combustion tests of coke breezes with different size and the bonding strength of sinter tests with coke breezes of coarse (2.003.15 mm), middle (0.51.0 mm) and fines (less than 0.5 mm) sizes were carried out by using microsintering and combustion equipment, respectively. Then, the indexes of NOx emission and sinter were investigated with optimizing the size of coke breeze by sinter pot tests. The results showed that the NOx concentration and the conversion rate of N element increased with decreasing the size of coke breeze. At the same time, the bonding strength of sinter improved with coke breezes of coarse and middle sizes. At addition, when the size of coke breeze was between 0.50 and 3.15 mm, the maximum concentration of NOx and the conversion rate of N element decreased by 8% and 27%, respectively. The sinter indexes were also improved.
阙志刚，王金生，艾仙斌，吴胜利. 基于固体燃料粒度优化的烧结过程NOx减排[J]. 中国冶金, 2019, 29(8): 8-13.
QUE Zhigang1,2,WANG Jinsheng3,AI Xianbin1,WU Shengli2. Reduction of NOx emission in sintering process based on #br#
optimization of solid fuel particle size[J]. China Metallurgy, 2019, 29(8): 8-13.
