Technology and application of rolling continuous quenching equipment for ultra-thin high-strength steel plates
FU Tian-liang1,2, TIAN Xiu-hua1,2, DENG Xiang-tao1,2, ZHANG Tian1,2, LIU Guang-hao1,2, WANG Zhao-dong1,2
1. State Key Laboratory of Rolling and Automation, Shenyang 110819, Liaoning, China; 2. School of Materials Science and Engineering, Northeastern University, Shenyang 110819, Liaoning, China
Abstract:The quenching of ultra-thin high-strength steel plates with high flatness is a technical problem in the industry. Based on the new understanding of high-efficiency heat transfer and quenching deformation mechanism, the constrained quenching deformation mechanism and low residual stress quenching method of wide and thin steel plates were proposed. Core components such as multi-frame high-rigidity hydraulic servo-controlled roller system and high-strength uniform array jet water jet cutter were invented. The world′s first set of ultra-thin and high-strength steel plate rolling quenching equipment and new quenching technologies such as asymmetric quenching, differential tension quenching, and stepwise restrained quenching was successfully developed. The heat treatment technology system of 3-6 mm ultra-thin high-strength steel plate was independently integrated. After applying the equipment technology, the quenching unevenness of 3 mm steel plate quenching was no large than 3-4 mm/2 m, and after heat treatment, the steel plate was not deformed after cutting, and was not cracked after 180° bending after welding, realizing stable quenching production in batches.
付天亮, 田秀华, 邓想涛, 张田, 刘光浩, 王昭东. 极薄高强钢板辊压式连续淬火装备技术与应用[J]. 中国冶金, 2021, 31(4): 97-101.
FU Tian-liang, TIAN Xiu-hua, DENG Xiang-tao, ZHANG Tian, LIU Guang-hao, WANG Zhao-dong. Technology and application of rolling continuous quenching equipment for ultra-thin high-strength steel plates[J]. China Metallurgy, 2021, 31(4): 97-101.
Nobari A H, Prodanovic V, Militzer M,et al. Heat transfer of a stationary steel plate during water jet impingement cooling[J]. International Journal of Heat and Mass Transfer,2016(101):1138.
[5]
FU T L,WANG Z D,DENG X T,et al. The influence of spray inclination angle on the ultra fast cooling of steel plate in spray cooling condition[J]. Applied Thermal Engineering,2015(78):500.
[6]
Gradeck M, Kouachi A, Lebouche M,et al. Boiling curves in relation to quenching of a high temperature moving surface with liquid jet impingement[J]. International Journal of Heat and Mass Transfer,2009(52):1094.