|
|
Experimental study of roll composite for low-alloy ultra-heavy steel plate |
WANG Xiao-yong1, WANG Hua-peng2, JIA Xiao-lin2, ZOU Yang1, PIAO Xue-feng2 |
1. Research Institute of Technology, Shougang Group Co., Ltd., Beijing 100043,China; 2. Heavy Plate Department, Shougang Jingtang United Iron and Steel Co., Ltd., Tangshan 063210, Hebei, China |
|
|
Abstract In order to meet the market demand of low-alloy steel plate with large single weight and ultra-heavy specifications, the experimental study of ultra-heavy steel plate produced by composite continuous casting slab was carried out by the rolling composite process. Ultra-heavy steel plates were obtained through rolling from composite slab. The comprehensive test and analysis show that the interface bonding of ultra-heavy steel plate produced by rolling composite process is good, and metallurgical bonding at atomic level is achieved with the sufficient recrystallization of grain at the bonding interface. The z-direction tensile properties meet the requirements of Z35, but the local reduction of area is low due to the existence of band-distributed oxides at the bonding interface microregion.
|
Received: 31 March 2022
|
|
|
|
[1] |
罗丽军,张海军.宽厚板行业竞争力分析[J].冶金信息导刊,2011(2):21.
|
[2] |
刘清梅,魏丽艳.特厚板品种生产现状及新技术研究[J].上海金属,2011(6):57.
|
[3] |
蔡得祥.大型特厚板用扁钢锭的研制[J].宝钢技术,2007(4):45.
|
[4] |
刘海啸.特厚板的生产与单向凝固技术[J].炼钢,1998,14(1):52.
|
[5] |
张东风.单向凝固发生产特厚钢板坯的可行性研究[J].鞍钢技术,1999(7):11.
|
[6] |
杨东,唐郑磊,李红洋,等.低合金结构钢Q345B 420 mm特厚板的研发[J].中国冶金, 2012, 22(1): 12.
|
[7] |
耿明山,刘艳,黄衍林.大型特厚板坯料制造技术现状和发展趋势[J].中国冶金, 2014, 24(8): 10.
|
[8] |
余伟,张烨铭,何春雨,等.轧制复合生产特厚板工艺[J].北京科技大学学报,2011,33(11):5.
|
[9] |
骆宗安,谢广明,胡兆辉.特厚钢板复合轧制工艺的实验研究[J].塑性工程学报, 2009,16(4):4.
|
[10] |
张亚樵,于涛,井玉安,等.轧制复合厚钢板的界面组织及力学性能[J].钢铁研究学报,2019,31(5):9.
|
[11] |
崔风平,崔琦,于秀琴.复合连铸板坯轧制特厚钢板技术的应用[J].宽厚板,2016,22(2):3.
|
[12] |
刘海宽,胡建国,张军.复合坯生产低合金特厚钢板初探[J].宽厚板,2013,19(6):19.
|
[13] |
陈振业,张晓力,张雲飞,等.低合金高强度结构钢特厚板的复合轧制工艺[J].特殊钢, 2014(4):31.
|
[14] |
李文斌,原思宇,李广龙,等. Q345B特厚复合钢板开发[J].钢铁, 2015, 50(11): 88.
|
[15] |
赵广辉,黄庆学,张占杰,等.轧制复合Q235B特厚钢板组织和力学性能的研究[J].热加工工艺, 2016,45(13):1.
|
[16] |
于九明,孝云祯,王群骄,等.金属层状复合技术及其新进展[J].材料研究学报, 2000(1):12.
|
[17] |
李娟,赵广辉,黄庆学,等.Q235A 特厚板轧制复合的实验分析[J].热加工工艺, 2017(23):115.
|
|
|
|