镍基高温合金中非金属夹杂物成分和特征控制

doi:10.13228/j.boyuan.issn1006-9356.20200582

摘要
图/表
参考文献
相关文章 (15)

全文: PDF (3885 KB) HTML (0 KB)
输出: BibTeX | EndNote (RIS)

摘要通过扫描电镜和能谱仪等设备,检测分析镍基高温合金中铝和钛含量对夹杂物的成分、形貌、尺寸、数量、夹杂物间的界面间距和面分布等参数的影响。通过经典热力学计算方法、FactSage软件,计算和分析冶炼过程中夹杂物的生成和演变。结果表明,镍基高温合金中夹杂物主要成分为Al₂O₃、Ti_xO_y、TiN,经典热力学计算和FactSage软件计算结果与夹杂物成分检测结果基本吻合。冶炼后期,高铝钛镍基合金、低铝钛镍基合金中夹杂物尺寸相差不多,但是高铝钛镍基合金中夹杂物数量明显较少,夹杂物界面间距较大,夹杂分布更加均匀。通过经典形核理论计算得出,高铝钛镍基合金中夹杂物形核半径是低铝钛镍基合金的3倍,在结合氧相同的情况下,增加合金中铝钛添加量,有利于减少夹杂物的形核数量,从而增加夹杂物的界面间距,减少夹杂物间的碰撞,减弱夹杂物间吸引,减少夹杂物间的聚集。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	作者相关文章
	王林珠
	李翔
	刘录凯
	杨树峰
	李军旗

关键词 ：非金属夹杂物, 镍基高温合金, 热力学计算, 形核半径, 尺寸分布

Abstract：In order to explore the influence of aluminum and titanium contents on the composition, morphology, size, number, interfacial spacing and area density of inclusions in nickel-based superalloy, high-temperature experiments were carried out, and devices such as scanning electron microscope(SEM) with energy spectrometer(EDS) were used. The formation and evolution of inclusions were calculated and analyzed by using the classical thermodynamic calculation method and FactSage software. The results showed that the main components of the inclusions in the nickel-based superalloy were Al₂O₃, Ti_xO_y and TiN. The classical thermodynamic calculated results and FactSage software calculated results were consistent with the observed composition of inclusions. The size of inclusions was similar in high Al-Ti nickel-based superalloy and low Al-Ti nickel-based superalloy at the later smelting stage. However, the number of inclusions was significantly less, the interfacial spacing of inclusions was larger, and the distribution of inclusions was more homogeneous in the high Al-Ti nickel-based superalloys. The classical nucleation theory calculation indicated that the nucleation radius of inclusions in high Al-Ti alloy was three times larger than that in low Al-Ti alloy. In the case of the same combined oxygen, increasing the addition amount of Al-Ti was beneficial to decrease the number of nucleation, thereby increasing the interfacial spacing of inclusions, reducing the collision of inclusions, weakening the attraction between inclusions, and decreasing the aggregation between inclusions.

Key words： non-metallic inclusion nickel-base superalloy thermodynamic calculation nucleation radius particledistribution

收稿日期: 2020-09-29

基金资助:国家自然科学基金资助项目(51804086,52064011);贵州省科技计划资助项目(黔科合基础[2018]1060号);贵州省教育厅青年科技人才成长资助项目(黔教合KY字[2018]105)

通讯作者: 李翔(1984—), 男, 博士, 副教授; E-mail: lixiang8656@163.com

作者简介: 王林珠(1989—), 女, 博士, 副教授; E-mail: lzwang@gzu.edu.cn;

引用本文:

王林珠, 李翔, 刘录凯, 杨树峰, 李军旗. 镍基高温合金中非金属夹杂物成分和特征控制[J]. 中国冶金, 2021, 31(5): 32-38. WANG Lin-zhu, LI Xiang, LIU Lu-kai, YANG Shu-feng, LI Jun-qi. Control on composition and characteristics of non-metallic inclusions in nickel-base superalloy[J]. China Metallurgy, 2021, 31(5): 32-38.

链接本文:

http://www.zgyj.ac.cn/CN/10.13228/j.boyuan.issn1006-9356.20200582 或 http://www.zgyj.ac.cn/CN/Y2021/V31/I5/32

[1]	郭建亭. 高温合金材料学[M]. 北京:科学出版社,2010.
[2]	蔡大勇. GH169及GH696高温合金热加工工艺基础研究[D]. 秦皇岛:燕山大学,2003.
[3]	陈国胜,刘丰军,王庆增,等. GH4169合金VIM+PESR+VAR三联冶炼工艺及其冶金质量[J]. 宝钢技术,2012(1):6.
[4]	王建明,牛建平,才庆魁. 镍基高温合金真空感应熔炼脱氧[J]. 材料与冶金学报,2003,2(3):177.
[5]	姚正辉,牛建平,王飞,等. 镍基高温合金脱氮工艺研究[J]. 有色金属(冶炼部分),2009(4):49.
[6]	MIAO G L,YANG X G,SHI D Q. Competing fatigue failure behaviors of Ni-based superalloy FGH96 at elevated temperature [J]. Mater. Sci. Eng. A,2016,668:66.
[7]	孟波,郭万林,余崇民,等. 镍基高温合金中夹杂物的微观力学行为[J]. 材料研究学报,2007,21(增刊):30.
[8]	唐中杰,郭铁明,付迎,等. 镍基高温合金的研究现状与发展前景[J]. 金属世界,2014(1):36.
[9]	李殿魁. 镍基高温合金的设计与相计算[J]. 上海钢研,1980(2):36.
[10]	郑宏波,杨树峰,陈正阳,等. 优质GH4738合金棒材夹杂物研究[J]. 中国冶金,2018,28(增刊):41.
[11]	郭建亭. 高温合金材料学(上)-应用基础理论[M]. 北京:科学出版社,2008.
[12]	唐中杰,郭铁明,寇生中,等. 镍基高温合金K4169中夹杂物的特征及形成机理[J]. 中国有色金属学报,2015,25(9):2403.
[13]	逯红果,王光华,田立敏,等. K424高温合金显微组织和力学性能分析[J]. 铸造技术,2020,41(9):820.
[14]	张鹏,杨凯,朱强,等. 微量元素对镍基高温合金微观组织与力学性能的影响[J]. 精密成形工程,2018,10(2):1.
[15]	孙文,秦学智,郭建亭,等. (W+Mo)/Cr比对铸造镍基高温合金时效组织和持久性能的影响[J]. 金属学报,2015,51(1):67.
[16]	谢兴飞,曲敬龙,杜金辉. GH4720Li镍基合金混晶组织对高温持久性能的影响[J]. 材料导报,2020,34(增刊1):375.
[17]	强军锋,梅自寒,余竹焕,等. 固溶处理在镍基高温合金中作用的研究进展[J]. 铸造技术,2020,41(3):291.
[18]	唐中杰,郭铁明,寇生中,等. 镍基高温合金K4169中夹杂物的特征及形成机理[J]. 中国有色金属学报,2015,25(9):2403.
[19]	苗华军,王岩,曾莉,等. Ni-22Cr-12Co镍基高温合金电渣重熔TiN变化行为[J]. 钢铁,2013,48(6):67.
[20]	郑亮,肖程波,张国庆,等. 高Cr铸造镍基高温合金K4648的母合金净度研究[J]. 材料工程,2012(3):1.
[21]	王传玉. 镍基合金中非金属夹杂物研究[D]. 兰州:兰州理工大学,2009.
[22]	Hino M,Ito K. Thermodynamic Data for Steelmaking [M]. 2nd ed. Tohoku:Tohoku University Press,2010.
[23]	陈家祥. 炼钢常用图标数据手册[M]. 北京:冶金工业出版社,1984.
[24]	Cramb A W,Jimbo I. Interfacial considerations in continuous casting [J]. Ironmaking and Steelmaking,1989,16(6):43.
[25]	王林珠,李军旗,杨树峰,等. 高铝钢中钙处理对非金属夹杂物特征的影响[J]. 钢铁,2019,54(11):27.