|
|
New process of removing impurities from aluminum alloy dross by roasting-pickling process |
ZHENG Chun-yan1,2, XIE Ming-zhuang1,2, ZHAO Hong-liang1,2, LÜ Han1,2, LIU Feng-qin1,2 |
1. State Key Laboratory of New Technologies in Iron and Steel Metallurgy, University of Science and Technology Beijing, Beijing 100083, China; 2. School of Metallurgical and Ecological Engineering, University of Science and Technology Beijing, Beijing 100083, China |
|
|
Abstract Aluminum alloy dross is a kind of hazardous waste with complex components produced in aluminum industry, and it is considered to have potential recycling value because of its high alumina content. A roasting-pickling process for removing impurities from aluminum alloy dross was presented. The influences of acid types, acid concentration, reaction temperature, extraction time, liquid-solid ratio and other factors on removing impurities from aluminum alloy dross during pickling were investigated. The phase and element composition of aluminum alloy dross before and after impurity removal were analyzed by XRD and XRF. The results show that the optimal pickling conditions are sulfuric acid, acid concentration of 1 mol/L, reaction temperature of 60 ℃, leaching time of 30 min, liquid-solid ratio of 10 mL/g. After pickling, the main phases of aluminum alloy dross are alumina (α-Al2O3) and Mg-Al spinel, the sum of the two accounting for about 94%, and the mass fraction of alumina can reach 82.73%. This study provides new idea for resource utilization of aluminum alloy dross.
|
Received: 26 December 2022
|
|
|
|
[1] |
康泽双,刘中凯,田野,等. 国内铝工业全行业铝灰特性和利用处置技术研究进展[J]. 有色金属(冶炼部分),2022(9):28.
|
[2] |
Shen H L,Liu B,Ekberg C,et al. Harmless disposal and resource utilization for secondary aluminum dross: A review[J]. Science of the Total Environment,2021,760(15):143968.
|
[3] |
侯佳鑫,李占兵,李少鹏,等. 二次铝灰酸解渣温和脱硅制备镁铝尖晶石[J]. 有色金属(冶炼部分),2022(10):58.
|
[4] |
刘宏博,郝雅琼,吴昊,等. 铝冶炼行业危险废物产生和利用处置现状与管理对策建议[J]. 环境工程技术学报,2021,11(6):1273.
|
[5] |
Verma S K,Dwivedi V K,Dwivedi S P. Utilization of aluminum dross for the development of valuable product: A review[J]. Materials Today: Proceedings,2021,43: 547.
|
[6] |
陈振坤. 铝灰综合利用技术的探讨[J]. 皮革制作与环保科技,2021,2(21):152.
|
[7] |
韩金珊,左正平,赵洪亮,等. 二次铝灰处置及利用现状及其在炼钢中的应用[J]. 中国冶金,2022,32(5):16.
|
[8] |
李燕龙,张立峰,杨文,等. 铝灰用于钢包渣改质剂试验[J]. 钢铁,2014,49(3):17.
|
[9] |
杨航,申士富,刘海营,等. 二次铝灰工艺矿物学特性研究[J]. 有色金属工程,2019,9(10):117.
|
[10] |
崔维,易武平,蔡安. 超声波强化浸出铝灰中氯的机理[J]. 过程工程学报,2017,17(4):757.
|
[11] |
李来时,张正勇,吴玉胜,等. 铝灰资源化研究新进展[J]. 轻金属,2020(11):16.
|
[12] |
Satish Reddy M,Neeraja D. Aluminum residue waste for possible utilisation as a material: A review[J]. Sādhanā,2018,43(8): 1.
|
[13] |
生态环境部.国家危险废物名录(2021年版)[J].中华人民共和国国务院公报,2021(4):18.
|
[14] |
蔡彬,邓金珠,檀笑,等. 再生铝工业铝灰渣特性及其贮存环境风险防控[J].无机盐工业,2021,53(12):117.
|
[15] |
周扬民. 铝灰的无害化处理及综合利用研究[D]. 昆明:昆明理工大学,2014.
|
[16] |
马英,杜建伟,项赟,等. 铝灰渣中回收氧化铝的研究现状和进展[J]. 轻金属,2017(2):29.
|
[17] |
郭冉,刘雄章,李青达,等. 铝灰高值化回收利用技术现状[J]. 无机盐工业,2017,49(11):12.
|
[18] |
Krnel K,Kosmac T. Reactivity of AlN powder in an aqueous environment[J]. Conference of the European-Ceramic-Society, 2004,264(1):29.
|
[19] |
Gil A,Korili S A. Management and valorization of aluminum saline slags: Current status and future trends[J]. Chemical Engineering Journal, 2016,289:74.
|
[20] |
鲍善词,李素芹,张昌泉,等. 二次铝灰中氟、氯的浸出与回收分析[J]. 中国冶金,2018,28(10):24.
|
[21] |
Mahinroosta M,Allahverdi A. A promising green process for synthesis of high purity activated-alumina nanopowder from secondary aluminum dross[J]. Journal of Cleaner Production, 2018,179:93.
|
[22] |
中国环境监测总站. 固体废物 氟化物的测定 离子选择性电极法: GB/T 15555.11—1995[S]. 北京:国家环境保护局,国家技术监督局,1995.
|
[23] |
李菲,郭学益,田庆华. 二次铝灰制备α-Al2O3工艺[J]. 北京科技大学学报,2012,34(4):383.
|
[24] |
李雪倩,申士富,王玲,等. 二次铝灰的焙烧特性和有害元素脱除研究[J]. 有色金属(冶炼部分),2020(9):69.
|
[25] |
邢修君,吴跃东. 国内外铝灰资源化利用技术发展现状[J]. 环境工程,2021,39(3):148.
|
[26] |
LÜ H,ZHAO H L,ZUO Z P,et al. A thermodynamic and kinetic study of catalyzed hydrolysis of aluminum nitride in secondary aluminum dross[J]. Journal of Materials Research and Technology,2020,9(5): 9735.
|
|
|
|