|
|
Root cause analysis of thickness anomaly for cold rolled strip based on cause inference |
ZHOU Jun, YANG Quan, WANG Xiao-chen |
Institute of Engineering Technology, University of Science and Technology Beijing, Beijing 100083, China |
|
|
Abstract Thickness accuracy is one of the important indicators of cold-rolled strip quality. For improving strip quality and stability of production, it is of great significance to quickly diagnose the abnormal thickness and locate the root cause of thickness anomaly. The influencing factors of thickness was determined by the rolling mechanism model, and the residual model of thickness increment was constructed by the multivariable linear regression method. Then the kernel density estimation of the residuals was utilized for detecting thickness anomaly. The causal effect of influencing factors was calculated based on causal inference to identify the root cause of thickness anomaly. The results in-practice show that the proposed method can accurately diagnose thickness anomaly and identify the root cause of anomaly, and the method is more effective than conventional method for cold rolling conditions with high correlation between the variables.
|
Received: 04 November 2022
|
|
|
|
[1] |
李广林,陈凌峰,张广治,等. 冷轧硅钢板形与横向厚度控制的分析[J]. 中国冶金,2015,25(4):24.
|
[2] |
胡韬,张卫,陈丹,等. 过程质量管控技术在冷轧轧制力优化中的应用[J]. 轧钢,2021,38(4):80.
|
[3] |
许健勇. 薄板冷轧厚度与板形高精度控制技术[J]. 钢铁,2002,37(1):73.
|
[4] |
熊文涛,郭德福,丁美良,等. 冷轧无取向硅钢纵向厚度精度优化控制方法[J]. 钢铁,2017,52(4):49.
|
[5] |
彭开香,马亮,张凯. 复杂工业过程质量相关的故障检测与诊断技术综述[J]. 自动化学报,2017,43(3):1.
|
[6] |
Erik Vanhatalo,Murat Kulahci,Bjarne Bergquist. On the structure of dynamic principal component analysis used in statistical process monitoring[J]. Chemometrics and Intelligent Laboratory Systems,2017,167:1.
|
[7] |
鄂东辰,张立杰. 基于分块多向主成分分析的翻车机液压系统故障诊断[J]. 中国机械工程,2018,29(8):958.
|
[8] |
JIANG Q,YAN X,HUANG B. Performance-driven distributed PCA process monitoring based on fault-relevant variable selection and Bayesian inference[J]. IEEE Transactions on Industrial Electronics,2016,63(1):377.
|
[9] |
武凯,孙彦广,张琳. 基于核主成分分析的热连轧断带故障诊断[J]. 中国冶金,2020,30(11):60.
|
[10] |
Gharahbagheri H,Imtiaz S A,Khan F. Root cause diagnosis of process fault using KPCA and Bayesian network[J]. Industrial and Engineering Chemistry Research,2017,56(8):2054.
|
[11] |
荆丰伟,冯莹,张勇军,等. 基于优化RT-PLS的热轧带钢头部厚差诊断研究[J]. 钢铁研究学报,2021,33(7):593.
|
[12] |
郭小萍,杨猛,李元. 基于改进重构贡献图的故障定位方法[J]. 仪器仪表学报,2015,36(5):1193.
|
[13] |
Van Den Kerkhof P,Vanlaer J,Gins G,et al. Contribution plots for statistical process control:Analysis of the smearing-out effect[C]//2013 European Control Conference. Zürich,Switzerland:ECC 2013,2013:428.
|
[14] |
王力,朱晓岩,丁桦,等. 1 450 mm酸洗机组自动化控制系统开发与应用[J]. 中国冶金,2015,25(10):9.
|
[15] |
YAO L Y,CHU Z X,LI S,et al. A survey on causal inference[J]. ACM Transactions on Knowledge Discovery from Data,2021,15(5):1.
|
[16] |
MacGrogor J F,Jaeckle C,Kiparissides C,et al. Process monitoring and diagnosis by multiblock PLS methods[J]. AIChE Journal,1994,40(5):826.
|
[17] |
卜赫男,闫注文,张殿华,等. 基于硬度辨识的冷连轧厚度控制模型[J]. 轧钢,2015,32(5):59.
|
[18] |
孙一康. 冷热轧板带轧机的模型与控制[M]. 北京:冶金工业出版社,2010.
|
[19] |
周春蕾,田品卓,杨晨琛,等. 基于聚类和核密度估计假设检验的异常值检测方法[J]. 数据采集与处理,2017,32(5):997.
|
[20] |
Abadie A,Imbens G W,Kennedy J F. Nber working paper series matching on the estimated propensity score[J]. Econometrica,2009,84(2):78.
|
[21] |
Karim M E,Petkau J,Gustafson P,et al. On the application of statistical learning approaches to construct inverse probability weights in marginal structural Cox models:Hedging against weight-model misspecification[J]. Communications in Statistics-Simulation and Computation,2017,46(10):7668.
|
[22] |
杨威,李维刚,赵云涛,等. 基于随机森林的钢材性能预报与影响因素筛选[J]. 钢铁,2018,53(3):44.
|
[23] |
高雷,郭立伟,陈丹. 冷连轧轧制力模型中变形抗力和摩擦系数的分析[J]. 轧钢,2013,30(4):12.
|
|
|
|