|
|
Analysis on slipping between strip and bridle roll of skin pass mill during speed-up process |
LI Yang-long, WANG Yong-qiang, WEN Jie, YU Meng, LI Gong-yin |
Department of Metallurgical Process, Research Institute of Technology, Shougang Group Corporation, Beijing 100043, China |
|
|
Abstract The strip slipping occurred frequently in the speed-up process of the skin pass mill in a factory, which seriously affected the surface quality of the strip. Based on the analysis of production process data, a method for judging the position and time of slipping between strip and bridle roll was proposed. Furthermore, a mathematical model of the movement between the strip and the bridle roll of the skin pass mill was established, and the main factors affecting the strip slipping in the speed-up process were analyzed. It was found that a small friction coefficient of bridle roll, a large speed and acceleration of the leveler and a large tension difference of the bridle roll assembly will increase the slipping risk between strip and bridle. The measures to solve the strip slipping problem were also put forward. The incidence rate of the strip slipping in the speed-up process was reduced from 3.33% to 0.17% after optimization, which played a positive role in the stable production of the skin pass mill.
|
Received: 20 June 2019
|
|
|
|
[1] |
张维召.邯钢2 180 mm酸轧机组打滑原因分析及其对策[J].轧钢,2017,34(6):71.
|
[2] |
李同庆,陈先霖,王建国.张力辊打滑及拉矫机应用的进一步探讨[J].冶金设备,1997(3):1.
|
[3] |
刘学良,徐传国,张祥昆.冷连轧机组轧辊原始表面粗糙度优化技术[J].钢铁研究学报,2018,30(11):888.
|
[4] |
刘学良,柯于军,潘东远.高速冷连轧过程中乳化液流量的优化控制[J].轧钢,2019,36(1):46.
|
[5] |
王文广,张清东,吴彬,等.拉伸弯曲矫直机S辊组周期性打滑机理及对策研究[J].冶金设备,2008(3):9.
|
[6] |
彭炜,谭志强,罗静,等.冷轧机组张力辊打滑问题研究[C]//第七届(2009)中国钢铁年会大会论文集(中).北京:中国金属学会,2009:315.
|
[7] |
张京诚.张力辊组打滑与设计原则分析[J].有色金属加工,2003,32(3):23.
|
[8] |
张春青,肖至勇.不锈钢冷退机组工艺段张力辊异常打滑的分析[J].宝钢技术,2015(1):72.
|
[9] |
石坤,张荣娟,罗静.冷轧镀锌拉矫机张力辊滑动的特点及对策[J].武钢技术,2014,52(6):49.
|
[10] |
白振华,王松尧,崔亚亚,等.乳化液流量与速度关系曲线优化设定技术[J].钢铁,2017,52(7):58.
|
[11] |
白振华,王骏飞.冷连轧机的打滑判断条件及打滑防治措施[J].上海金属,2014,26(4):27.
|
[12] |
王柱,刘宁,李文,等.济钢1 700热轧带钢粗轧机打滑现象研究[J].中国冶金,2011,21(1):38.
|
[13] |
宋浩源,陈甚超,张生,等.冷连轧机打滑机架判别与打滑防控手段研究[C]//第十一届中国钢铁年会论文集.北京:中国金属学会,2017:1.
|
[14] |
车海军,韩欣艳,杨景明,等.基于IAGA的冷连轧机预防打滑的规程优化设计[J].北京科技大学学报,2010,32(10):1360.
|
[15] |
白振华,连家创,王骏飞.冷连轧机以预防打滑为目标的压下规程优化研究[J].钢铁,2003,38(10):35.
|
[16] |
袁文振,张宝平,杜国强.转向辊升速过程带钢打滑行为力学建模及应用[J].中国冶金,2015,25(11):30.
|
|
|
|