中薄板坯连铸结晶器浸入式水口的优化设计

摘要
图/表
参考文献
相关文章 (15)

全文: PDF (0 KB) HTML (0 KB)
输出: BibTeX | EndNote (RIS)

摘要应用数值模拟软件对唐钢中薄板坯连铸结晶器及浸入式水口内的钢水流场、温度场进行数值模拟，分析了水口结构、拉速、浸入深度和铸坯断面对流场和温度场的影响，在此基础上确定了水口的最佳结构和浸入深度，并在生产中进行了验证，不但提高了铸坯质量和产量且稳定了连铸生产。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	王义芳
	郝华强
	何金贤
	WANG Yifang
	HAO Huaqiang
	HE Jinxian

关键词 ：板坯连铸, 浸入式水口, 流场, 温度场, 数值模拟

Abstract：The three dimensional flow field and temperature distribution in medium thick slab continuous casting mould of Tang Steel have been simulated by mathematical simulation soft. The influence of SEN config, casting speed, submerge depth and cross section on flow field and temperature distribution has been discussed. And the optimum SEN config and submerge depth were fixed based on the mathematical simulation and implication in production. The results show that the quality of slab has been improved and the operation of continuous casting has been stabled.

Key words： slab continuous casting SEN flow field temperature field mathematical simulation

收稿日期: 1900-01-01

引用本文:

王义芳，郝华强，何金贤. 中薄板坯连铸结晶器浸入式水口的优化设计[J]. 中国冶金, 2008, 18(4): 25-25. WANG Yifang,HAO Huaqiang，HE Jinxian. Config Improve of Submerged Entry Nozzle in Medium Thick
Slab Continuous Casting Mould. China Metallurgy, 2008, 18(4): 25-25.

链接本文:

http://www.zgyj.ac.cn/CN/ 或 http://www.zgyj.ac.cn/CN/Y2008/V18/I4/25