Effect of final helical electromagnetic stirring on crack formation in large bloom
WU Hongjian1, XU Changjun1, LEI Chong2, WANG Tao1, LIN Huijie2, LI Jing1
1. School of Materials and Metallurgy, University of Science and Technology Liaoning, Anshan 114000, Liaoning, China; 2. Henan Zhongyuan Special Steel Equipment Manufacturing Co., Ltd., Jiyuan 459000, Henan, China
Abstract:Internal crack is one of the common defects for special steel bloom. Electromagnetic stirring is the common technical means to improve the uniformity of microstructure and composition of the bloom. The helical electromagnetic stirrer is not only simple in structure, convenient in installation, but also has obvious stirring effect. To investigate the effect of final helical electromagnetic stirring (F-HEMS) on the liquid steel flow, heat transfer and crack formation in large bloom, experiments and numerical simulations were carried out. It is found that the liquid steel in the liquid core is spirally flowing along the casting direction under the action of electromagnetic force, and the range is concentrated in the height range of the electromagnetic stirrer. The temperature gradient between zero ductility temperature and liquid impenetrable temperature (TZD-TLI) in continuous casting bloom is increased by 31.56%-42.27% and the TZD-TLI zone width is decreased by 6.6 mm with F-HEMS. Under the influence of F-HEMS, the liquid fraction in the mushy zone decreases. The distributions of temperature, Von-Mises stress and elastic equivalent strain in continuous casting bloom are all stratified. After the application of F-HEMS, Von-Mises stress and elastic equivalent strain in TZD-TLI zone of continuous casting bloom decrease by 0.11 MPa on average and 0.02 percent point on average, respectively. Based on numerical simulations and experiments, a cracking index formula is proposed to predict the internal cracking risk. It is found that the crack index when using F-HEMS is 0.158-0.280 smaller than when not using F-HEMS, which proves that F-HEMS can reduce the probability of crack formation in continuous casting bloom. However, the formation of internal cracks is affected by many factors, and the cracking prediction of large bloom in continuous casting process still needs to improve the simulation method and be proved by a large number of experimental data. F-HEMS affects liquid steel flow and heat transfer in continuous casting large bloom, reduces the probability of internal crack formation. The research results provide a theoretical basis for industrial production.
吴红健, 许长军, 雷冲, 王涛, 林辉杰, 李静. 凝固末端螺旋电磁搅拌对大圆坯裂纹形成的影响[J]. 中国冶金, 2023, 33(11): 72-80.
WU Hongjian, XU Changjun, LEI Chong, WANG Tao, LIN Huijie, LI Jing. Effect of final helical electromagnetic stirring on crack formation in large bloom[J]. China Metallurgy, 2023, 33(11): 72-80.
ENGSTROM G,FREDRIKSSON H,ROGBERG B. On the mechanism of macrosegregation formation in continuous cast steels[J]. Scandinavian Journal of Metallurgy,1983,12(1):3.
[12]
SIVESSON P,HÃILEN G,WIDELL B. Improvement of inner quality of continuously cast billets using electromagnetic stirring and thermal soft reduction[J]. Ironmaking and Steelmaking,1998,25(3):239.
LI G L,JI C,ZHU M Y. Prediction of internal crack initiation in continuously cast blooms[J]. Metallurgical and Materials Transactions B,2021,52B(2):1164.
[16]
LI X B,DING H,TANG Z Y,et al. Formation of internal cracks during soft reduction in rectangular bloom continuous casting[J]. International Journal of Minerals,Metallurgy and Material,2012,19(1):21.
GUO Q T,JIA J X,LIAO X W,et al. Research of helical magnetic field stirring in bloom continuous casting[C]//The 6th International Steelmaking Technology Conference. Beijing:The Chinese Society for Metals,2015:666.
[22]
WU H J,XU C J,JIN H Y,et al. Effect of different positions of final electromagnetic stirring for ø800 mm vertical round billet on fluid flow and heat transfer[J]. Applied Physics A,2022,128(2):1.
[23]
WU H J,XU C J,LEI C,et al. Numerical simulation and industrial experiment of the fluid flow and heat transfer in large vertical round billets with helical final electromagnetic stirring[J]. JOM,2022,75(5):1439.
[24]
REN B Z,CHEN D F,XIA W T,et al. Numerical simulation of electromagnetic field in round bloom continuous casting with final electromagnetic stirring[J]. Metals,2018,8(11):903.
[25]
BARNA M,JAVUREK M,REITER J,et al. Numerical simulations of mould electromagnetic stirring for round bloom strands[J]. BHM Berg und Huettenmannische Monatshefte,2009,154(11):518.
[26]
TRINDADE L B,VILELA A C F,FILHO Á F F,et al. Numerical model of electromagnetic stirring for continuous casting billets[J]. IEEE Transactions on Magnetics,2011,38(6):3658.
[27]
YAGHI A H,HYDE T H,BECKER A A,et al. Residual stress simulation in welded sections of P91 pipes[J]. Journal of Materials Processing Technology,2005,167(2/3):480.
WON Y M,YEO T J,SEOL D J,et al. A new criterion for internal crack formation in continuously cast steels[J]. Metallurgical and Materials Transactions B,2000,31(4):779.
[30]
FARUP I,DREZET J M,RAPPAZ M. In situ observation of hot tearing formation in succinonitrile-acetone[J]. Acta Materialia,2001,49(7):1261.
[31]
PHILLION A B,HAMILTON R W,FULORIA D,et al. In situ X-ray observation of semi-solid deformation and failure in Al-Cu alloys[J]. Acta Materialia,2011,59(4):1436.
CLYNE T,WOLF M,KURZ W. The effect of melt composition on solidification cracking of steel with particular reference to continuous casting[J]. Metallurgical and Materials Transactions B,1982,13(2):259.
[34]
WON Y,KIM K,YEO T,et al. Effect of cooling rate on ZST,LIT and ZDT of carbon steels near melting point[J]. ISIJ International,1998,38(10):1093.
[35]
BRIMACOMBE J K,SORIMACHI K. Crack formation in the continuous casting of steel[J]. Metallurgical Transactions B,1977,8(2):489.
[36]
YIN H B,YAO M. Analysis of the nonuniform slag film,mold friction,and the new cracking criterion for round billet continuous casting[J]. Metallurgical Materials Transactions B,2005,36(6):857.
[37]
POLTARAK G,FERRO S,CICUTTI C. Estimation of internal cracking risk in the continuous casting of round bars[J]. Steel Research International,2016,88(4):1.