冷轧工作辊热凸度及其对板形影响

doi:10.13228/j.boyuan.issn1006-9356.20210704

摘要
图/表
参考文献
相关文章 (15)

全文: PDF (5532 KB) HTML (0 KB)
输出: BibTeX | EndNote (RIS)

摘要冷轧过程中工作辊的热凸度变化是决定带材板形质量的重要因素,研究分析工作辊的热变形及其对板形的影响对于提高带材质量有着重要的意义。以某厂1 450 mm冷连轧生产线为研究对象,运用大型有限元分析软件ANSYS与LS-DYNA分别建立四机架与五机架的工作辊二维热凸度有限元仿真模型和三维有限元轧制仿真模型,并将2个仿真模型相结合,分析热凸度变化对板形的影响规律、工作辊上机后的热辊形变化过程及其对板形的影响规律,进一步分析轧制速度改变引起的热辊形变化对板形的影响以及乳化液温度、边部预热宽度对板形的影响,为以后冷轧板形质量提升提供了基础。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	作者相关文章
	渠福泉
	李旭
	张宇峰
	李晓华
	李康
	秦秀珍

关键词 ：热凸度, 板形, 温度场, 有限元分析, 工作辊

Abstract：The thermal crown change of the work roll in cold rolling process is an important factor to determine the strip shape quality. The research and analysis of the thermal deformation of work roll and its influence on the strip shape is of great significance to improve strip quality. Taking the 1 450 mm tandem cold rolling production line of a plant as the research object, the two-dimensional thermal crown finite element simulation model and three-dimensional finite element rolling simulation model of No.4 stand and No.5 stand work rolls respectively were established by the large-scale finite element analysis software ANSYS and LS-DYNA. The two simulation models were combined to analyze the influence law of thermal crown change on the plate shape. The hot roll shape change process and its influence on the shape after the work roll putting on the machine were analyzed. The influence of the hot roll shape change caused by the change of rolling speed on the shape and the influence of emulsion temperature and edge preheating width on the shape were further analyzed, which provided a basis for the improvement of cold rolling shape quality in the future.

Key words： thermal crown plate shape temperature field finite element analysis work roll

收稿日期: 2021-11-10

基金资助:国家自然科学基金资助项目(U20A20187); 中央高校基本科研业务专项资金资助项目(N2007006); 辽宁省兴辽英才计划资助项目(XLYC2007087)

通讯作者: 李旭(1983—), 男, 博士, 教授; E-mail: lixu@ral.neu.edu.cn

作者简介: 渠福泉(1993—), 男, 硕士生; E-mail: 1900582@stu.neu.edu.cn

引用本文:

渠福泉, 李旭, 张宇峰, 李晓华, 李康, 秦秀珍. 冷轧工作辊热凸度及其对板形影响[J]. 中国冶金, 2022, 32(4): 84-93. QU Fu-quan, LI Xu, ZHANG Yu-feng, LI Xiao-hua, LI Kang, QIN Xiu-zhen. Thermal crown of cold rolling work roll and its effect on strip shape[J]. China Metallurgy, 2022, 32(4): 84-93.

链接本文:

http://www.zgyj.ac.cn/CN/10.13228/j.boyuan.issn1006-9356.20210704 或 http://www.zgyj.ac.cn/CN/Y2022/V32/I4/84

[1]	张殿华,孙杰,陈树宗,等. 高精度薄带材冷连轧过程智能优化控制[J]. 钢铁研究学报,2019,31(2):180.
[2]	么玉林,李旭,王鹏飞,等. 冷轧带钢倾斜浪缺陷产生机理分析及控制研究[J]. 轧钢,2021,38(5):54.
[3]	白振华,王楠,崔熙颖,等. 冷连轧升降速过程板形控制工艺润滑制度优化[J]. 钢铁,2021,56(12):96.
[4]	韦晓,李秀军,曾松. 二次冷轧机组宽中浪板形缺陷控制研究[J]. 轧钢,2020,37(2):34.
[5]	孙杰,单鹏飞,彭文,等. 基于数据降噪的冷轧板形调控功效系数获取[J]. 钢铁,2021,56(6):67.
[6]	Slonim E P. Mathematical simulation of one class of distributed plants[J]. Avtomat. i Telemekh,1974(6):155.
[7]	李维刚,刘相华,郭朝晖. 带材热连轧工作辊温度场与热凸度的数值模拟[J]. 中国有色金属学报,2012,22(11):3176.
[8]	郭忠峰,徐建忠,李长生,等. 1700热连轧机轧辊温度场及热凸度研究[J]. 东北大学学报(自然科学版),2008,29(4):517.
[9]	Park C M,Choi J T,Moon H K,et al. Thermal crown analysis of the roll in the strip casting process[J]. Journal of Materials Processing Technology,2009,209(8):371.
[10]	韦晓,李秀军,王亚南. 二次冷轧机组工作辊温度场与热行为仿真研究[J]. 冶金设备,2019(5):8.
[11]	涂艳丰. 冷轧带材温度及轧辊温度场模拟[D]. 沈阳:东北大学,2009.
[12]	王伟,孙常青. 1600高速铝箔轧机工作辊温度场的有限元分析[J]. 机械制造与自动化,2017,46(5):113.
[13]	陈宝官,Tien A K. 用有限元法预测板带轧机工作辊热变形[J]. 钢铁,1991,26(8):44.
[14]	LI C S,LIU X H,WANG G D,et al. Three-dimensional FEM analysis of work roll temperature field in hot strip rolling[J]. Metal Science Journal,2013,18(10):1147.
[15]	LI Chang-sheng,YU Hai-liang,DENG Guan-yu,et al. Numerical simulation of temperature field and thermal stress field of work roll during hot strip rolling[J]. Journal of Iron and Steel Research International,2007,14(5):18.
[16]	JIANG M,LI X,WU J,et al. A precision on-line model for the prediction of thermal crown in hot rolling processes[J]. International Journal of Heat and Mass Transfer,2014,78:967.
[17]	居龙,李洪波,张杰,等. 基于多目标遗传算法的工作辊温度场计算与分析[J]. 北京科技大学学报,2014,36(9):1255.
[18]	刘涛,张伟. 基于数据挖掘的带材冷轧机轧辊热凸度的研究[J]. 钢铁研究学报,2015,27(11):43.
[19]	杨金光,孙丽荣,刘华强,等. 基于PSO和DE优化算法的热轧工作辊热辊形的研究[J]. 塑性工程学报,2018,25(3):289.
[20]	Tseng A A,Tong S X,Chen T C. Thermal expansion and crown evaluations in rolling processes[J]. Materials and Design,1997,18(1):29.
[21]	Schipper G. Practical method to calculate effects of work roll cooling on strip shape and crown[J]. Ironmaking and Steelmaking,1996,23(1):66.
[22]	Wang Y,Martonosi M,Peh L S. A new scheme on link quality prediction and its applications to metric-based routing[C]//International Conference on Embedded Networked Sensor Systems. [S.l.]:DBLP,2005:288.
[23]	李友荣. 传热学[M]. 北京:科学出版社,2012:21.
[24]	郭忠峰,李长生,徐建忠,等. 薄板坯连铸连轧过程轧辊温度场及热凸度的研究[C]//薄板坯连铸连轧国际研讨会. 广州:中国金属学会,2006:476.
[25]	Duncan S R,Allwood J M,Garimella S S. The analysis and design of spatial control systems in strip metal rolling[J]. IEEE Transactions on Control Systems Technology,1998,6(2):220.
[26]	JIA C Y,SHAN X Y,LIU L M,et al. Fuzzy neural model for flatness pattern recognition[J]. Journal of Iron and Steel Research International,2008,15(6):33.
[27]	HE H T,YAN L. A new flatness pattern recognition model based on cerebellar model articulation controllers network[J]. Journal of Iron and Steel Research International,2008,15(5):32.